Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

PLEASE NOTE: If adding an aftermarket camera to the original system please use part number 27-249

Allows you retain the original OEM camera on multiple Mitsubishi models.

Suitable for original head units with 8 pin Grey camera connectors.

Allows you to retain an original reverse camera from a Mercedes factory fitted Audio 20 or COMAND head unit when fitting an after-market radio.

PLEASE NOTE: This cable is only compatible with single fakra connections. Double fakra connections are not supported.

Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage or Hyundai iX35 WITH ISO CONNECTIONS ON THE ORIGINAL RADIO as well as interfacing with the steering wheel controls.

This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.

Suitable for Kia Sportage (SL) or Hyundai iX35 2010 - 2015 with original OEM amplifier and ISO connections, including models with Infinity Sound Amplifier.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Subaru vehicle models (2007-2013) with original Kenwood Navigation head unit.

Allows you retain the original OEM camera on mostly Japanese Domestic Market model Toyotas with 6v rear camera.

Suitable for original head units with 4 pin camera connector.

PLEASE NOTE: European and Japanese spec cars often have different head units - if your model was sold in both markets, please check the connections before ordering

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Outlander (2014-2018) and Pajero (2016-2018) car models

Use this cable to retain an original fitment camera when fitting a new head unit.

For Fiat, Alfa Romeo, Lancia and other Fiat Chrysler group vehicles built after 2014 with original reverse camera.

Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage as well as interfacing with the steering wheel controls.

This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.

MUST BE USED WITH PART 23-235

Suitable for Kia Sportage (SL) 2010 - 2015 with original OEM amplifier, including models with Infinity Sound Amplifier.

Use this cable to retain an original fitment camera when fitting a new head unit.

For General Motors, Chevrolet, Cadillac and GMC 2012 onwards cars and trucks with original equipment navigation and reverse camera.

This retention interface allows you to keep the factory reverse camera working when upgrading to an aftermarket head unit in a Honda Civic/CR-V (2012-2017). It connects directly to the OEM connector so there’s no need to cut factory wires. Designed to deliver the camera feed seamlessly via RCA output, this cable lets you retain safety features while installing your new stereo.

PLEASE NOTE: designed for used with our steering wheel control interfaces with reverse trigger output.

Use this cable to retain an original fitment camera when fitting a new head unit.

For Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera.

This camera retention adapter allows you to retain your factory reverse camera when installing an aftermarket stereo in a wide range of VW, Skoda, and SEAT vehicles. The cable connects into the new Quadlock harness used for the new aftermarket head unit, and a separate reverse feed is required to activate the camera on the new screen. InCarTec CANbus interfaces (49-VW-01, 49-VW-02, 49-VW-05) provide this reverse signal. With plug-and-play installation and broad compatibility, this adapter ensures seamless integration and preserves your vehicle’s original safety features.

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota car models with 24 (9+15) Pin connector (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

This vehicle-specific 8 pin harness adapter is designed for selected Mitsubishi vehicles and is used to add an aftermarket camera to the factory screen. It provides a cleaner, vehicle-specific solution when integrating a new camera with the original display system.

PLEASE NOTE: When retaining the original reverse camera with an aftermarket head unit, please use part number 27-248-R, which is specifically designed for this.

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Mazda car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Kia and Hyundai car models, when replacing with a new aftermarket head unit.

This interface is compatible with various Kia and Hyundai car models with an original factory fitted AVN head unit with a 24pin connection.