WORKSHOP TRADE PARTS
Fuses and fuseholders
12V ignition spur from cigarette lighter or accessory power socket circuit. Comes with 10 amp fuse in the spur with a female bullet connection.
Use for hard wiring 12v ignition feed to radios where a CAN interface is not available or for dash cams and other accessories that require 12v with the ignition of the car.
Suitable for use with many European vehicles.
Mini ANL fuse holder gold plated (6-20mm2)
For cable protection of 6-20 mm² and a current of 10-150 A.
Note: Please use wire end sleeves for protection to protect the cable strands and for better contact
RECOIL (MINI ANL) Inline fuse holder (4-8 AWG)
RECOIL (MINI ANL) 2-WAY Inline fuse holder (4-8 AWG)
These packs of 10 water resistant ATC/ATO 10/15 AMP Inline Fuse Holders are great for hardwiring accessories into the fuse box.
Made with heavy duty 16 AWG wire and a tight-fitting water resistant lid, these holders are great for locating fuses in areas where dust, moisture or water ingress could cause problems, meaning they can withstand the harshest of environments both off-road and offshore.
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
These can be used with our 10 Amp Red standard ATO blade fuses (83-310) and 20 Amp Yellow (83-320B)
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs.
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
These can be used with our 10 Amp (83-510) and 20 Amp (83-520B) Mini ACN blade fuses
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade (MICRO 2) fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Can be used with our 10 Amp Red (83-610) and 20 Amp Yellow (83-620B) ACZ (Micro 2) blade fuses
High-quality Mini ANL and ATC Fuse holder for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 High-quality Mini ANL and ATC Fuse holders for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 high-quality Dual ATC Fuse holders for 10mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
10 amp standard (ATO, ATC, APR) blade automotive fuse
RED
10 pcs per pack
These can be used with our ATO ATC dual-slot blade fuse holders (83-225-10)
20 amp standard (ATO, ATC, APR) blade automotive fuse
YELLOW
100 pcs per pack
These can be used with our ATO ATC dual-slot blade fuse holders (83-225-10)
10 amp mini (APM, ATM) blade automotive fuse
RED
100 pcs per pack
These work with our MINI ATS BLADE Fuse Holders (83-226-10)
20 amp mini ATS blade automotive fuse
YELLOW
100 pieces per pack
These work with our MINI ATS BLADE Fuse Holders (83-226-10)
10 amp mini (ACN) blade automotive fuse
RED
10 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227-10)
20 Amp mini (ACN) blade automotive fuse
YELLOW
100 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227-10)
20 Amp Yellow ACZ (Micro 2) blade fuses (100pcs pack)
YELLOW
100 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
10 Amp Micro3 blade fuses (10pcs pack)
RED
10 pcs per pack
Can be used with our Micro3 blade fuse holder tap spur (83-229-10)
20 Amp Yellow Micro3 blade fuses (10pcs pack)
YELLOW
10 pcs per pack
Can be used with our Micro3 blade fuse holder tap spur (83-229-10)
© Copyright 2025 InCarTec. All Rights Reserved
