Passive DAB/ DAB+ / DVB-T antenna splitter/diplexer designed to be used with combi flex roof mount antennas.
This top quality OEM German made passive antenna splitter divides the input signal into several frequency ranges or communication services. Including DAB/DAB+ and DVB-T.
Suitable for vehicle and house interiors, the splitter allows the division of digital radio DAB/DAB+ and digital television DVB-T. The phantom power from the DVB-T tuner is passed through to the antenna.
High gain amplified DAB and FM antenna designed to be installed in large vehicles such as motorhomes or sports/classic cars with plastic/fibre glass shells.
Discreetly fits underneath the dashboard or top fairing above the windscreen.
DIN to DAB & FM antenna aerial amplifier splitter/ radio distributor.
This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.
PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas
AM, FM, DAB and DAB+ splitter amplifier +15db, for car audio FAKRA radios.
FAKRA radio antenna connector fitting kit for FM and DAB amplifier. Improves the reception of passive antenna.
This splitter amp can be powered either with a phantom feed OR 12v external supply. (if both by accident no damage will occur). It can only be used on vehicles with a PASSIVE antenna already on the vehicle (i.e. no in line amplifier or in antenna base amplifier fed by a 12v feed). This is because an am/fm amp will stop at 110 MHz therefore blocking any DAB signals that would be picked up by the antenna.
PLEASE NOTE: This amplifier needs a separate 12V supply feed.
AM, FM, DAB and DAB+ splitter amplifier +15db, for car audio DIN radios.
This splitter amp can be powered either with a phantom feed OR 12v external supply (if both by accident no damage will occur). It can only be used on vehicles with a PASSIVE antenna already on the vehicle (i.e. no in line amplifier or in antenna base amplifier fed by a 12v feed). This is because an AM/FM amp will stop at 110 MHz therefore blocking any DAB signals that would be picked up by the antenna.
PLEASE NOTE: This amplifier needs a separate 12V supply feed
This top quality OEM German made amplifier splits the radio input signal into AM/FM and DAB. These two signals are amplified independently of each other and can help improve the reception quality of passive broadcast antennas
This radio amplifier is suitable for both vehicles and inside house interiors and thanks to extended bandwidth in the HF frequency range is DRM-compatible.
The amplifier needs a separate 12V supply feed. The OUTPUT side of the amplifier will supply a phantom 12v feed up the centre core of the cable.