High gain amplified DAB and FM antenna designed to be installed in large vehicles such as motorhomes or sports/classic cars with plastic/fibre glass shells.
Discreetly fits underneath the dashboard or top fairing above the windscreen.
Hirschmann HIT AUTA 2050 Automatic (Motorised) wing mount AM/FM Antenna
The Hirschmann HIT AUTA 2050 Body Mounted AM/FM antenna is supplied with removable chrome telescopic mast, low noise integrated motor, wiring kit and universal mounting bracket.
It uses the same Hirschmann screw-type connection for the coaxial aerial cable to the radio, so there is no need to cut it or to find an adapter. Small and compact, it will fit in virtually all vehicles.
This aerial is a perfect replacement for the older 6000U type aerial common in many 1970s and early '80s Mercedes-Benz's as well as many other cars.
GPS/ DAB+/ FM/ AM car audio Shark Fin aerial antenna
Top quality OEM German made Shark Fin antenna designed for GPS, DAB Digital Radio and AM/FM in various vehicles and car models.
Can be mounted in new Mercedes and Audi vehicle using adapter seals (Sold separately)
20dB DAB and FM amplification. Includes 3 x 5m extension cables for FM, DAB and GPS.
If fitting aftermarket navigation units like Pioneer/Alpine you will need to use the original GPS connector supplied with the unit , CUT the the cable and solder it to the cable supplied with the 70-918. WE DO NOT HAVE ADAPTERS.
DAB & AM/FM Combiflex car audio roof antenna set with DAB and FM extensions.
Top quality OEM German made combiflex antenna designed for Digital Radio DAB and AM/FM in various vehicles and car models.
With a 75 degree angle, this car audio roof antenna includes a 5m fakra to fakra extension and a fakra to SMB female for DAB, and a 5m fakra to fakra and fakra to din for AM/FM.
This antenna needs a separate switched 12v feed. 10db gain for DAB.
Amplified FM antenna designed to be installed in large vehicles such as motorhomes or sports/classic cars with plastic/fibre glass shells.
Discreetly fits underneath the dashboard or top fairing above the windscreen.
PLEASE NOTE: To convert to DAB use splitter item 70-926-F
This top quality OEM German made amplifier splits the radio input signal into AM/FM and DAB. These two signals are amplified independently of each other and can help improve the reception quality of passive broadcast antennas
This radio amplifier is suitable for both vehicles and inside house interiors and thanks to extended bandwidth in the HF frequency range is DRM-compatible.
The amplifier needs a separate 12V supply feed. The OUTPUT side of the amplifier will supply a phantom 12v feed up the centre core of the cable.
External adhesive glass mount active DAB car aerial antenna whip (With 15db gain)
This top quality OEM German made aerial whip has a high 15db gain and a separate 12V feed. This antenna is designed for a 12V phantom feed supplied by the DAB source up the centre of the coaxial cable.
If using with a DAB device with a switchable 12v phantom feed down the coaxial cable make sure that this is switched ON.
For best performance this antenna should be mounted at least 5mm between antenna and the vehicle body.
PLEASE NOTE: Avoid mounting the antenna in areas which have heated glass screens or tinted glass
AM/ FM/ DAB/ DAB+ passive high performance combiflex adjustable roof mount antenna aerial
This top quality OEM German made combiflex roof antenna establishes reliable, powerful radio connections in the area of ??broadcasting and is suitable for mobile use outdoors (on the roof or side).
With an adjustable whip angle from 10 to 115° and minimal 15mm installation depth, this passive high performance antenna is suitable for AM, FM, DAB and DAB+
PLEASE NOTE: If using for both FM and DAB please use with our 70-926 splitter amplifier
Magnetic mount DAB+ car aerial antenna whip (With 2db gain)
This top quality OEM German made aerial can be mounted on the roof of a metal body car for best performance, or can also be hidden inside and mounted the vehicle chassis.
Comes with a 3 metre cable terminated with an SMB right angle female connector.
Roof mount DAB digital radio and AM/FM car radio antenna.
The antenna has a built in amplifier, this gives 10dB signal gain for high performance. A separate +12v power supply needs to be supplied to turn on the signal amplifier.
70° whip angle.
5 metre cables are included.
One wire is a single wire for the amplifier turn on power supply, the antenna cable for AM/FM has a standard aftermarket DIN antenna connection, the DAB antenna cable has a standard aftermarket DAB SMB connector.
DIN to DAB & FM antenna aerial amplifier splitter/ radio distributor.
This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.
PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas
Internal adhesive glass windscreen mount active car aerial antenna, With 11db gain.
This top quality OEM German made aerial has a high 11db gain and a separate 12V feed and earth ring. This antenna is powered by a separate 12V feed.
For best performance this antenna should be mounted in the middle of the front window or on the side window of the vehicle, at least 5mm between antenna and the vehicle body.
PLEASE NOTE: Avoid mounting the antenna in areas which have heated glass screens or tinted glass
This AM/FM active antenna is a high performance antenna designed for mounting in all vehicles (motorhomes, caravans, commercial vehicles) on all smooth surfaces such as wood, glass, plastic and GRP internally.
The active antenna is powered via a dedicated power wire, amplifying the AM/FM signal and providing excellent reception.
PLEASE NOTE: This antenna will require a switched power feed to power the amplifier, if not powered the aerial will not perform
Internal dashboard mount passive GPS antenna (With male SMA connector) Comes with a 5 metre (500cm) antenna cable terminated with a male SMA connector.