Bulk pack of 10 RCA Stereo Ground Loop Isolators/ Audio Signal Noise Filters (2 Channel)
Eliminates ground loop noise between the audio source and radio. Stops alternator "whine" and ignition "ticking".
Used to solve noise problems in Car audio audio systems and AUX in situations.
Box of 10 Interior windscreen glass mount DAB radio antenna aerials suitable for aftermarket DAB car radios.
Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.
A bulk pack of 5 DIN to DAB & FM antenna aerial amplifier splitters.
This interface amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.
PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas
Bulk pack of 5 Interior windscreen glass mount DAB radio antenna aerials suitable for aftermarket DAB car radios.
Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.
Bulk pack of 10 Double Fakra to Male DIN aerial antenna adapter cables (With 12v phantom power)
This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
Bulk pack of 10 Fakra DAB male to DAB SMB female antenna adapter cables (50cm)
Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)
Bulk pack of 10 ISO to Male DIN antenna adapter cables (With 12v power feed)
Antenna adapter cable for cars with ISO connectors that have amplified original antennas.
This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.
It also provides a power feed to give 12v from the car radio to the cars amplified antenna.
Bulk pack of 5 x 5 metre male Fakra to female Fakra in car radio aerial/ antenna extension cables.
This 5 metre (5m) aerial extension can be used when installing a new car aerial or to extend the Fakra connector when fitted at the rear of a vehicle.
It has a male Fakra connector at one end and a female Fakra connector at the opposite end.
Pack of 5
8 rolls of TESA Black PET Fleece cloth electrical harness tape (20mm x 25m)
- Tearable by hand eliminating the need for cutting tools
- Noise dampening ideal for noise prevention
- Rip resistant and highly durable
- Age resistant for a long lasting fastening
- Strong adhesion suitable for a variety of environments
Bulk pack of 5 High-quality Mini ANL and ATC Fuse holders for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 high-quality Dual ATC Fuse holders for 10mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
8 Rolls of Tesa PVC electrical insulation tape 33m (Black)
Black 33m x 19mm Tesa Insulation tape.
Thickness 0.12mm
Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.
These packs of 10 water resistant ATC/ATO 10/15 AMP Inline Fuse Holders are great for hardwiring accessories into the fuse box.
Made with heavy duty 16 AWG wire and a tight-fitting water resistant lid, these holders are great for locating fuses in areas where dust, moisture or water ingress could cause problems, meaning they can withstand the harshest of environments both off-road and offshore.
Bulk pack of 10 DIN to ISO aerial antenna adapters.
This adapter converts the cars existing DIN aerial plug to an aftermarket ISO type used by older model Alpine, Blaukpunt, Siemens, VDO and some other European radio manufacturers.
Suitable for Ford & Japanese cars that have a DIN original style antenna cable.
Can also be used to convert any DIN cables to ISO
A bulk pack 10 Male to Female Right Angled RCA phono Adapters (5 Red - 5 Black)
Set at a 90 Degree angle, making them perfect for use In tight installation places
A bulk pack of 10 gold plated male to male RCA Phono adapters
Use for joining 2x female phono cables together, or converting a female socket to a male.
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
These can be used with our 10 Amp Red standard ATO blade fuses (83-310) and 20 Amp Yellow (83-320B)
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade fuse tap spurs.
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
These can be used with our 10 Amp (83-510) and 20 Amp (83-520B) Mini ACN blade fuses
Easily install additional circuits without the need for splicing and cutting cables with our packs of 10 Blade (MICRO 2) fuse tap spurs
Replace a fuse in the fuse box with this Fuse link T Tap to give you an extra fused spur to supply an accessory device.
Can be used with our 10 Amp Red (83-610) and 20 Amp Yellow (83-620B) ACZ (Micro 2) blade fuses
20 amp standard (ATO, ATC, APR) blade automotive fuse
YELLOW
100 pcs per pack
These can be used with our ATO ATC dual-slot blade fuse holders (83-225-10)
10 amp mini (APM, ATM) blade automotive fuse
RED
100 pcs per pack
These work with our MINI ATS BLADE Fuse Holders (83-226-10)
20 amp mini ATS blade automotive fuse
YELLOW
100 pieces per pack
These work with our MINI ATS BLADE Fuse Holders (83-226-10)
20 Amp mini (ACN) blade automotive fuse
YELLOW
100 pcs per pack
Can be used with our MINI ACN blade fuse holder tap spur (83-227-10)
20 Amp Yellow ACZ (Micro 2) blade fuses (100pcs pack)
YELLOW
100 pcs per pack
Can be used with our ACZ (Micro 2) blade fuse holder tap spur (83-228-10)
A bulk pack of 10 gold plated female to female RCA Phono adapters
Use for joining 2x male phono cables together
A bulk pack of 8 RCA Female to RCA Female Phono extension adapters/couplers.
These adapters are great for use on Amplifiers, Subwoofers, Speakers and other car or vehicle audio installations.
Their compact, stylish and dual injection moulded RCA body provides a strong connection, unlike other single moulded RCA connectors.
Make identifying your RCA cables easier with the color-coded identifiers. The transparent and blue colours make identifying the left/right channels or front/rear channels easier.
The coupler allows you to connect two male RCA cables together. They can be used to extend the RCA component video cable with simple installation. Or use them as adaptors for male RCA connectors.
A bulk pack of 8 RCA Male to RCA Male Phono extension adapters/connectors.
These adapters allows you to connect two female RCA cables together, or use them for converting a female socket to a male.
These adapters are great for use on Amplifiers, Subwoofers, Speakers and other car or vehicle audio installations.
Their Compact, stylish, and dual injection moulded RCA body provides a strong connection, unlike other single moulded RCA adapters. Nickel-plated split RCA connectors for excellent signal transfer.
Make identifying your RCA cables easier with our color-coded identifiers. The transparent and blue colours make identifying the left/right channels or front/rear channels easier.
The semi-professional set is a must have for any installer who has to remove plastic trim.
6 Pack of Panel tools to help remove dashboard trim panels.
A selection of forked, flat and wedge ends.
Bulk pack of 10 ISO to DIN aerial antenna adapters.
This adapter converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.
Bulk pack of 10 Crimp Solder Plugs for DIN car aerial antenna adapters
Used when replacing the DIN aerial adapter
