PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Montero Sport, Pajero Sport and Shogun Sport (2016-2019) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for various Toyota models from 2014-2019

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for Toyota RAV4 (2019 Onwards) with amplified sound systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Subaru vehicle models (2007-2013) with original Kenwood Navigation head unit.

Retain original Camera on Volkswagen and Skoda cars with an RGB camera

This Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on various Volkswagen and Skoda vehicle models

PLEASE SEE LONG DESCRIPTION FOR FULL COMPATIBILITY

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface for Toyota RAV4 cars allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Toyota Alphard (2002 - 2008) and RAV4 (2006 - 2012) vehicle models.

Allows you retain the original OEM factory fitted camera and AUX-in when installing a new aftermarket head unit on select Honda (2015 Onwards) vehicles Without touchscreen.

This adapter cable includes a 12V DC to 6V DC voltage converter to provide a suitable power supply to a cars original parking camera.

PLEASE NOTE: Only suitable for select Honda (2015 Onwards) vehicles Without Touchscreen

Toyota 2019 onward reverse camera retention interface allowing use of the original reverse camera with a new aftermarket head-unit.

Retains original reverse camera, includes handbrake output.

See full description for compatible cars and compatibility notes.

Allows you retain the original OEM camera on a Honda 2VN0 navigation system when installing a new aftermarket head unit.

Suitable for 2VN0 units with a Green 7 Pin connector

PLEASE NOTE: For 2VN0 Navigation Systems only. Please check connections in instructions for compatibility  

Allows you retain the original OEM camera on a Honda 2VN3 navigation system when installing a new aftermarket head unit.

Suitable for 2VN3 units with 7 and 8 pin Grey connectors.

PLEASE NOTE: For 2VN3 Navigation Systems only. Please check connections in instructions for compatibility  

Allows you retain the original OEM camera on multiple Mitsubishi models.

Suitable for original head units with 8 pin Grey camera connectors.

Allows you retain the original OEM camera on European models of Honda Civic or CRV (2012-2017)

Also fits 2008-2014 Honda Jaz with original Navigation

Suitable for original head units with 7 pin Grey camera connectors.

PLEASE NOTE: designed for used with our steering wheel control interfaces with reverse trigger output.

Reverse Camera input adaptor for Ford Sync 2 8 inch & Sync 3 Systems. Vehicle Coding required

Enables connection of a aftermarket backup camera to the original OEM system. 

Allows you retain the original OEM camera on Toyota Aygo, Peugeot 108 and Citroen C1

Suitable for original head units with 8 pin camera connector.

PLEASE NOTE: Suitable for cameras from original fitment X-Touch and X-Nav head units

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota (2012 Onwards) car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671 

Retain original Camera on Ford Transit Euro 5/6  (With small 4.2 inch screen)

This Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on Ford Transit Euro 5 and Euro 6 models (With the smaller 4.2 inch screen display)

PLEASE NOTE: ONLY SUITABLE FOR FORD TRANSIT EURO 5/ EURO 6 MODELS WITH SMALLER 4.2 INCH DISPLAY) 

Use this cable to retain an original fitment camera when fitting a new head unit. Comes with 12v to 6v voltage adapter.

Also for Subaru cars with original 7" screen built from 2015 onwards

Drops 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.

Use with camera retention interfaces that do not have a voltage dropper built in.

PLEASE NOTE: This is not a camera interface. If you are looking to add or retain a camera please visit our car specific camera interface range

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Kia and Hyundai car models, when replacing with a new aftermarket head unit.

This interface is compatible with various Kia and Hyundai car models with an original factory fitted AVN head unit with a 24pin connection.

• Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Nissan car models, when replacing with a new aftermarket head unit.

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on selected Suzuki and Izuzu cars, when replacing with a new aftermarket head unit.

This interface is compatible with all touch screen models from 2012 onwards.

Allows you retain the original OEM camera on mostly Japanese Domestic Market model Toyotas with 6v rear camera.

Suitable for original head units with 4 pin camera connector.

PLEASE NOTE: European and Japanese spec cars often have different head units - if your model was sold in both markets, please check the connections before ordering

Retain original Camera on Highline Volkswagen, Seat and Skoda cars with Volkswagen RNS510, RNS315, RCD510, Seat Trinax and Skoda Bolero or Columbus head units.

This Camera interface runs from the original camera module, located elsewhere in the car to the back of the new radio.

Only for highline cars with moving guide lines and a white display in the Multi function display.

PLEASE SEE LONG DESCRIPTION FOR FULL COMPATIBILITY

Use this cable to retain an original fitment camera when fitting a new head unit.

For Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera.

Use this cable to retain an original fitment camera when fitting a new head unit.

For General Motors, Chevrolet, Cadillac and GMC 2012 onwards cars and trucks with original equipment navigation and reverse camera.

This camera  cable  is used in conjunction with a new Quadlock cable and allows you to retain the use of the original reverse camera when fitting an aftermarket head unit. Suitable for Volkswagen Transporter T6 vans/vehicles and Car with the MIB 2  system.

Allows you to retain an original reverse camera from a Mercedes factory fitted Audio 20 or COMAND head unit when fitting an after-market radio.

PLEASE NOTE: This cable is only compatible with single fakra connections. Double fakra connections are not supported.

Use this cable to retain an original fitment camera when fitting a new head unit.

For Fiat, Alfa Romeo, Lancia and other Fiat Chrysler group vehicles built after 2014 with original reverse camera.