Bulk pack of 5 x 5 metre male Fakra to female Fakra in car radio aerial/ antenna extension cables.

This 5 metre (5m) aerial extension can be used when installing a new car aerial or to extend the Fakra connector when fitted at the rear of a vehicle.

It has a male Fakra connector at one end and a female Fakra connector at the opposite end.

Pack of 5

Universal CANBUS interface providing two outputs.

This outputs on this device is 12v ignition and 12v illumination.

This product requires hardwiring to ta permanent live, ground, CAN High and CAN low and is intended for professional installers.

Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.

RECOIL 3+8 Pole Busbar kit (3 x 3/8" inch terminal power distribution block) 

Eleven connections red busbar with 3 x 3/8? stainless steel studs and 8 x #8 stainless steel screws.

Eleven connections black busbar with 3 x 5/16? stainless steel studs and 8 x #8 stainless steel screws.

Comes with 3 x 8AWG 3/8”, 3 x 8AWG 5/16”and 16 x #8 insulated ring terminals.

The reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

Dual 2.1 Amp USB panel mount charging socket.

Drops 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.

Use with camera retention interfaces that do not have a voltage dropper built in.

PLEASE NOTE: This is not a camera interface. If you are looking to add or retain a camera please visit our car specific camera interface range

ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes.

Suitable for almost any vehicle with a permanent 12v feed to the radio using standard ISO connections.

Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.

RECOIL Dual/ 2 Pole Busbar kit (3/8" terminal power distribution block) 

These high-quality power distribution blocks allow for multiple connections to positive and negative systems.

Suitable for boat, car or caravan installations, each block can maintain multiple connections, making them flexible and robust for a variety of uses.

• Two connections with 3/8? stainless steel studs.
• Comes with 8 AWG 3/8” ring terminals and stainless-steel screws.
• Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.
• Max voltage: 48V DC.
• Max continuous amperage: 250A DC

A Pair of 200mm (8") speaker spacer rings for 200mm speakers

Speaker size: 200mm (8 inch)

Mounting hole diameter: 182mm

Outer Diameter: 202mm

Thickness 22mm

A Pair of 6X9 speaker spacer rings for 6"x9" speakers

Speaker size: 6x9

Mounting hole diameter: 154mm x 227mm

Outer Diameter: 186mm x 260mm

Thickness 18mm

Mini USB female to USB male adapter

Commonly used to retain original USB when fitting an aftermarket head unit.

Microphone for use with handsfree kits and after market head units with a 3.5mm jack mic connector

A Pair of angled 6X9 speaker spacer rings for 6"x9" speakers. Angled to push sound into the cabin of the car.

Speaker size: 6x9

Mounting hole diameter: 150mm x 225mm

Outer Diameter: 180mm x 249mm

Thickness 30mm - 45mm

Bulk pack of 10 Crimp Solder Plugs for DIN car aerial antenna adapters

Used when replacing the DIN aerial adapter

A Pair of 200mm (8") speaker spacer rings for 200mm speakers

Speaker size: 200mm (8 inch)

Mounting hole diameter: 182mm

Outer Diameter: 202mm

Thickness 12mm

LED head torch with 12 high intensity LEDs

This 12 LED headlamp torch is useful for all sorts of applications around the garage workshop, at home or generally just out and about.

Give great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.

The LED Headlight torch is also the perfect safety accessory to keep in your car for emergency use. Wear it in dimly lit areas so you can see and be seen, ideal for when you are out walking, cycling, fishing, camping or even as an additional domestic light for getting up in the night or reading etc.

20mm HSS hole saw cutter drill bit.

Made from High Density Steel, this hole saw can be used to cut 20mm holes, such as those needed when fitting our CA-9401.V2 reversing cameras.

Pack of nuts, bolts, washers and terminals for fitting a pair of speakers and speaker rings.

Contains the following
12x M5 Bolts
12x M5 Flanged Nuts
8x M5 Stainless Steel Washers
4x 2.8mm Insulated Spade Terminals
4x 4.8mm Insulated Spade Terminals

12V ignition spur from cigarette lighter or accessory power socket circuit. Comes with 10 amp fuse in the spur with a female bullet connection.

Use for hard wiring 12v ignition feed to radios where a CAN interface is not available or for dash cams and other accessories that require 12v with the ignition of the car.

Suitable for use with many European vehicles.

Momentary panel mount rocker switch. Push and hold to activate the switch, springs back to original position on release. 19mm hole diameter.

ON/OFF panel mount toggle rocker switch. 19mm hole diameter.

Universal Side Fixing Brackets for Double DIN Car Radio Stereo Fascia.

Will fit a number of different fascias and have has cut outs to fit most Double DIN radios. Se long description for dimensions.

SOLD AS A PAIR

PLEASE NOTE: Sold individually, colours and fragrances can vary

Auto Shine Car Air Freshener Extra Long Lasting Fresh Scent

Auto shine air fresheners add a pleasant fragrance, refreshing the environment while removing unpleasant smells. Their long lasting fragrance can be used in your car, boat or home.