Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)
Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
Audi Quadlock CAN steering wheel control interface and audio adapter cable for rear amplified cars (49-AUD-02)
This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The CANbus steering wheel control interface will retain the use of the original radio controls on the steering wheel with an aftermarket stereo. The CANbus interface generates a key present ignition supply to the new stereo, this means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel. The interface also generates speed pulse, reverse gear and handbrake output signals, these are used when installing multimedia, navigation units and reverse cameras. This interface is built into the Quadlock to ISO harness adapter so installation is plug and play.
The plug and play Quadlock to ISO cable also has a built in high to low level adapter for the rear amplified speakers. The adapter allows the new stereo to work with the original amplifier which drives all the speakers in the car and the subwoofer. The high to low level adapter gives a much cleaner audio signal to the amplifier compared to using line output phono leads.
Universal patch lead for steering control interface (49-025)
Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Audi A3 (2003-2013) Single/Double DIN car audio fascia adapter with removable pocket (50-271)
Replacement car audio fascia to enable you to change the original radio in the car to a Single and Double DIN aftermarket version
Fits Audi A3 (8P) (2003 - 2007) and A3 (8P) facelift/ 8PL (2006 - 2013) car models (For OEM Radios With Rounded Corners)
A removable pocket is included for Single DIN installation.
COLOUR: MATT BLACK
PLEASE NOTE: For a double din installation please use 50-702
The fascia will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit. If not, you will need our cage item number 51-013.
A flush mount PRO-fit style fascia is also available, please see 50-271-PRO
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Audi - A3 (8P) facelift & 8PL (2006 - 2013)
