PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description
CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.
Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse and reverse gear CAN outputs.
This interface connects to the CANbus wires at the back of the radio. These are white and white/orange wires in pins 5 and 6 in the 22 way connector. Vehicles from 2005 generally had the CANbus wires present at the radio. We do recommend removing the head unit to check if the CANbus wires are present if the vehicle around a 2005 production year.
The CANbus interface retains the use of the original audio controls on the steering wheel with an after market head unit.
The interface also switches on the original amplifier in the car via a CANbus turn on signal.
Gives out speed pulse and reverse gear CANbus signals.
PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. if unsure please use our universal patch lead set
| Radio Being Fitted | Part Number | Short Description |
Resistive Programming (Loose Wire) | 29-UCCAB-000 | Loose wire Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Alpine | 29-UCCAB-001 | Patch lead for 29-UC Series Steering wheel control for Alpine stereo. |
| Clarion/ JVC | 29-UCCAB-003 | Patch lead for 29-UC Series Steering wheel control for Clarion/JVC stereos. |
| Kenwood/ JVC (Single Wire) | 29-UCCAB-005 | Single Wire Patch lead for 29-UC Series Steering wheel control for Kenwood/JVC stereos. |
| Pioneer/ Sony | 29-UCCAB-007 | Patch lead for 29-UC Series Steering wheel control for Pioneer/Sony stereos. |
Resistive Programming (3.5mm Jack) | 29-UCCAB-016 | 3.5mm Jack Patch lead for 29-UC Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
| Universal | 29-UCCAB-SET | Patch lead set for 29-UC Series Steering wheel control for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack. |
PLEASE NOTE: This part is NOT suitable for Chrysler Sebring or 200
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chrysler - 300C 1st Gen (2005 - 2011)
Chrysler - PT Cruiser (1st Gen Facelift) (2006 - 2008)
Dodge - Caliber (2006 - 2008)
Jeep - Commander (XK) (2006 - 2009)
Jeep - Compass 1st Gen (MK49) (2007 - 2009)
Jeep - Grand Cherokee 3rd Gen (WK) (2005 - 2010)
Jeep - Patriot (MK74) (2007 - 2013)
