; Nissan Juke (2010-2014) Complete Double DIN fitting kit and Kenwood DMX5020 (Carplay/Android) - InCarTec
InCarTec Products > FITTING KITS

Nissan Juke (2010-2014) Complete Double DIN fitting kit and Kenwood DMX5020 (Carplay/Android)

FK-797-RES-KEN
Price: £287.00 (£344.40 inc VAT)

Complete stereo upgrade kit to install ar Double DIN aftermarket radio and retain the use of the steering wheel controls in Nissan Juke pre facelift (2010-2014) car models.

This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.

This head unit fitting kit includes:

  • Steering control for resistive programmable head-units (20-163-SWC)
  • Nissan antenna adapter (21-118)
  • Nissan Juke (2010 - 2014) Single/ Double DIN fascia (50-797)
  • DAB internal windscreen active antenna (70-923)
  • Kenwood DMX5020DABS double din stereo head-unit

Complete stereo upgrade kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Nissan Juke pre facelift (2010-2014) car models.
This kit comes complete with Kenwood DMX5020DABS Double DIN stereo head-unit with Car Play and Android Auto.
This complete head unit fitting kit includes:

Steering control for resistive programmable head-units (20-163-SWC)
This plug and play cable allows you to connect an aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.
This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Nissan rectangle to DIN car aerial antenna adapter cable (21-118)

Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo.


Nissan Juke (2010 - 2014) Single/ Double DIN fascia (50-797)

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version. This fascia includes side fixing brackets so no fitting cage is required for Double DIN installation

Includes removable pocket for Single DIN installations

Fits Nissan Juke (2010 - 2014) car models

COLOUR: MATT BLACK


Kenwood DMX5020DABS

Kenwood DMX5020DABS Double DIN radio Head Unit with DAB and enhanced wired Smartphone connections (Apple Carplay/ Android Auto) 6.8" Touch screen with wired Apple CarPlay and Android Auto, Spotify Direct Control, DAB/FM/MW/LW Radio, Bluetooth hands-free calling and music streaming, iPod/iPhone music playback and USB.

This head unit has a short chassis design making it easier to install in vehicles with shorter depth behind the dash 


Key features:

- 6.8" WVGA Capacitive Touch screen - White Key Illumination

- Apple CarPlay® & Android Auto™ Ready

- Android USB Mirroring Ready

- Built-in DAB+ Tuner & Bluetooth module

- Bluetooth wireless music browsing ready

- 2 Preouts + subwoofer(mono) (2,0V)

- 13 Band EQ - DSP - DTA Built-in

- AV-in or Camera-in (Selectable) / AV-out

- Rear Camera input with built-in parking guide lines

- Short Chassis for easy installation


Short chassis design

At only 75mm deep, the Kenwood DMX5020DABS short chassis design makes for a more flexible installation, making it easier to install in vehicles with shorter depth behind the dash than other leading head units.


For more information and specification, please visit https://www.kenwood.eu/car/navigation_multimedia/multimedia/DMX5020BTS/?view=


Useful tools (Sold Separately)

  • Trim Panel Tool Set A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
  • Digital Multimeter - A small, low cost multimeter, a useful tool for testing and finding issues with car electrics and audio systems, and an essential tool for novices as well as car audio professionals.
  • Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.
  • Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.

Brand: InCarTec

Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Nissan - Juke 1st GEN (F15) (2010 - 2014)

Browse our products by category

CARPLAY / ANDROID AUTO
Car radio stereos and head units
STEREO HEAD-UNIT FITTING - CAR SPECIFIC PARTS
STEREO HEAD-UNIT FITTING - UNIVERSAL PARTS
AERIALS & ANTENNA ADAPTERS
AUX, USB, RCA
BLUETOOTH KITS AND FITTING PARTS
CAR RADIO SPARES / OEM PARTS
SPEAKERS AND FITTING KITS
SPEAKER FITTING PARTS
AMPLIFIERS AND FITTING
Subwoofers
BLAM AUDIO
Recoil Audio
CAMERA INTEGRATION (Adding/Retaining)
Commercial, Van and Leisure
PARKING SENSORS
Dash Cams
WORKSHOP TRADE PARTS
Sale