;
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars with 6 function audio controls on the steering wheel and 20 pin connectors at the back of the radio. (Does not include the i button)
The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, phone and source buttons from the steering wheel with the new radio.
Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars to fit an aftermarket radio upgrade.
The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug and play installation.
This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons. (6 function steering wheels)
This interface fits cars with the newer 20 way car audio connector that has two larger size terminals at either end of the connector.
These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit.
Installation notes
Compatibility notes:
Below are examples of 6 function steering wheels.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Radio Being Fitted | Part Number | Short Description |
Resistive Programming (Loose Wire) | 29-000 | Loose wire Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
Alpine | 29-001 | Patch lead for 29-Series Steering wheel control for Alpine stereos. |
Clarion | 29-003 | Patch lead for 29-Series Steering wheel control for Clarion stereos. |
JVC (Single Wire) | 29-004SW | Single Wire Patch lead for 29-Series Steering wheel control for JVC stereos. |
Kenwood | 29-005 | Patch lead for 29-Series Steering wheel control for Kenwood stereos. |
Pioneer | 29-007 | Patch lead for 29-Series Steering wheel control for Pioneer stereos. |
Sony | 29-008 | Patch lead for 29-Series Steering wheel control for Sony stereos. |
Resistive Programming (3.5 Jack) | 29-016 | 3.5mm Jack Patch lead for 29-Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereos. |
Universal | 29-025 | Self-Pinning Patch lead for Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive programming head units with either two wires or a 3.5mm jack. |
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chevrolet - City Express (2014 - 2018)
Nissan - Navara (D40) (2005 - 2016)
Nissan - NV200 (2010 - 2019)
Nissan - Pathfinder R51 (2005 - 2013)
Nissan - Qashqai 1st Gen (J10) (2007 - 2013)