Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.
Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in select Vauxhall vehicles.
This head unit fitting kit includes:
Fakra to DIN aerial adapter cable with 12v phantom power (Part of 29-UC-050-VAUX)
This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.
Steering wheel control interface (29-UC-050-VAUX)
CANbus interface to maintain the steering wheel controls. This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors. Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal. This interface will also allow you to use the car's original steering control buttons to access the original display screen to update the time and date settings.
UNICAN patch lead set (29-UCCAB-SET)
Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.
Single DIN fascia SHINY SILVER/ MATT CHROME (50-230/2)
This fascia adapter panel is to fit a Single DIN aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a Shiny Silver/ Matt Chrome finish, commonly found in various Vauxhall cars.
COLOUR: SHINY SILVER/ MATT CHROME
PLEASE NOTE: To remove the original radio, you will require radio release keys, part number 52-012
This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Holden - Astra (AH) (2004 - 2009)
Holden - Captiva 5 / Captiva MaXX (2006 - 2015)
Holden - Tigra (XC) (2005 - 2006)
Vauxhall - Antara (2007 - 2015)
Vauxhall - Astra H (2004 - 2010 )
Vauxhall - Tigra II (2004 - 2009)
Vauxhall - Zafira B (2005 - 2014)
