Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.

Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for steering control input by resistive learning.

Only to be used with InCarTec 20-XXX-SWC series ISO steering wheel control cables

NOT FOR USE WITH PIONEER OR ALPINE RADIOS

Adapter cable to pair an InCarTec 29-6XX  series steering wheel remote control interface

Use this patch lead on head units with resistive programming such as Chinese branded stereo like Xtrons, Eonon, Pumpkin, Joying etc. that have KEY 1 and KEY GROUND 

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Alpine stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Clarion stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket JVC stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Kenwood stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Pioneer patch lead to be used with an In Car Tec 29-6xx or 29-7xx series steering wheel control interfaces.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Sony stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

This patch lead gives out a fixed voltage between the tip and base of the 3.5mm jack plug. Use with self learning programable aftermarket units like Blaupunkt. Also for Kenwood, Sony units using their "CUSTOM" setting for steering control input

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Alpine stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Clarion stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Kenwood stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Sony stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Pioneer patch lead for 29-CT series steering controls
Suitable for Pioneer head-units that are steering wheel remote ready.

Can only be used with our 29-CT series steering wheel controls

Universal self pinning patch lead for InCar Tec 39 series CANBUS steering wheel control interfaces

This is a spare part needed if you re-use a 39 series interface on a different head-unit

Patch lead for the UNICAN range of steering control interfaces for resistive programming head units and head units with loose wire learning SWC input.

To be used with non-branded and Chinese head units. Also for use with other brands of head units that have loose wires for steering control input with the feature to "learn" the steering controls.

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Alpine specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit.
For JVC and Clarion car radios

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Specific patch cable to connect a Unican interface to the SWC socket on the back of the head-unit.
For Kenwood and JVC car radios with either a single wire connection.

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Specific patch cable to connect a Unican interface to the  SWC socket on the back of the head-unit.
For Pioneer / Sony car radios with either a mini Din plug or a single wire connection.

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
NOT COMPATIBLE WITH CHINESE 2WIRE SWC HEAD-UNITS  use 49-000 for these

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Chinese, Xtrons, Eonon or unbranded stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

For programmable 3.5mm aftermarket head units please use this with 20-3.5-SWC

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls.

Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

PLEASE NOTE: This patch lead set must be used with a 29-UC-Series steering wheel control interface, it will not work on its own