Complete fitting kit to install a Double DIN aftermarket stereo head unit and retain use of the original steering wheel controls in select Land Rover Discovery 3 and Range Rover Sport car models with standard factory radio and standard audio systems.
This complete stereo upgrade fitting kit includes:
Antenna adapter with bullet connection (21-123K)
This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.
The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.
The phantom power feed terminates in a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces with a female bullet connection for the electric antenna turn on.
Steering control interface (29-658)
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the standard steering wheel audio controls (volume, seek, source and mute) with an aftermarket head unit.
Suitable for Land Rover Discovery 3 and Range Rover Sport car models with standard factory radio and standard audio systems.
Installation notes
- Connect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit
- Loose Red wire - Connect loose Red wire to the 12V Ignition in the vehicle
- Loose blue wire (Antenna turn-on) - This needs to be connected to the antenna turn on cable on the antenna adapter cable (21-123K)
Universal SWC patch lead (29-025)
Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.
Double DIN fascia and fitting cage (50-853)
Car radio fascia adaptor panel to allow the fitting of an aftermarket Double Din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with a fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation. The fascia is designed to fit various Landrover cars.
Fitting kit notes
This fitting kit is only suitable for select Land Rover Discovery 3 and Range Rover Sport car models with the standard6 speaker audio system with AM/FM radio and single CD and no factory fit navigation screen above the original radio.
These were usually found on Land Rover Discovery 3 (TDV6, V6 SE and TDV6 SE) model variants, as well as Range Rover Sport model variants.
- For vehicles with standard audio systems and retain the navigation screen on top of the dashboard please use a different steering wheel control interface, part number 29-712-SPK
- For vehicles with factory fitted Harman/ Kardon amplified systems you will need to bypass the amplifier located in the drivers side rear quarter panel or under the driver's seat and use a different steering wheel control interface, part numbers 20-308-SPK and 29-758 or fitting kit FK-853-2
Useful tools (Sold Separately)
- Trim Panel Tool Set - A must have for any installer who has to remove plastic trim, to avoid damage to the delicate finishes on both interior and exterior trim. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
- Digital Multimeter - A small, low cost multimeter, a useful tool for testing and finding issues with car electrics and audio systems, and an essential tool for novices as well as car audio professionals.
- Led Headlamp Torch - Gives great visibility when working on a vehicle in the workshop, great for locating those dark hard-to-see locations during an installation.
- Disposable Gloves - Offer great protection for your hands during installations. Also trusted across various sectors, including automotive, agriculture, healthcare, food and catering, manufacturing, and more.
Brand: InCarTec
Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Landrover - Discovery III (LR3) (2004 - 2009)
Landrover - Range Rover Sport (L320) (2005 - 2009)
