Universal push fit rear view camera and 5 inch standalone monitor kit

Universal push fit reversing camera designed to be used on any vehicle with a 12v feed, with the camera having a built in 6 volt adapter.

It's clever 20.5mm push fit design means it fits perfectly on any under-hang surface like just above a car number plate.

This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.

PLEASE NOTE: This camera will require a 20.5mm hole to fit into, a drill cutting tool will be required for this

Product information

• Universal fitment
• Front and rear view
• Push fit design
• 20.5mm diameter
• 12v feed needed, built in 6v adapter
• Colour CMOS image, NTSC.
• Parking guidelines: Optional
• IP68 Waterproof
• Includes power and video extension cables

Notes for installation fitting

Purple or White loop - Cut loop to disable parking guidelines

Blue Loop - Cut loop to switch to front view camera option

5 inch standalone windscreen video monitor with suction mount bracket

These monitors are great to use when installing an aftermarket reverse camera without having to affect the original factory fitted system.

Comes with a 4 ratchet (4R) style mounting point for use with other 4R series mounts and brackets.

Main Features

- High brightness/resolution digital 5" wide-screen LCD panel applied.

- Super slim design, easy to mount on top of dashboard or window glass.

- Dual video input, standard RCA connectors. Shielding cables used to avoid signal interference when both channels are connected to cameras or video.

- Adjustable suction mount bracket.

- Adjustable brightness and colour intensity.

- Rear 4 ratchet (4R) style mounting point for use with other 4R series mounts and brackets. (see below picture)

- Guidelines only available when used with a camera with guidelines.

Specifications

- Screen type: TFT LCD

- Screen size: 5" colour

- Resolution:480*RGB*272

- Brightness:400cd/m2

- Display format: 16:9

- Video input: 2-channel

- Voltage: 12V

Installation

- Can be powered from a 12v ignition or reverse feed.

- Sometimes the reverse power feed from the reversing lights may not be strong enough to power the monitor. A separate power feed relay (10-641) may be required to give a better 12v power feed.