Please find our all of our Kia fitting parts listed below: Car audio cables, parking sensor interfaces, steering wheel control cables, amplifier intergration & bypass cables, antenna adapters, speaker rings, reversing & rear view cameras, fascias, and full stereo upgrade kits
Return to all Kia cars
Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models (WITH BASIC AUDIO)
This head unit fitting kit includes:
PLEASE NOTE: This fitting kit only works on Kia Sportage models with basic audio. Not suitable for SPDIF digitally amplified vehicles
For single DIN installation a pocket will need to be purchased separately
Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models (WITH BASIC AUDIO)
This head unit fitting kit includes:
PLEASE NOTE: This fitting kit only works on Kia Sportage models with basic audio. Not suitable for SPDIF digitally amplified vehicles
For single DIN installation a pocket will need to be purchased separately
Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models) with OEM factory fitted Navigation systems
This complete head unit fitting kit includes:
PLEASE NOTE: This fitting kit only works on Kia Sportage models with OEM factory navigation systems. Not suitable for SPDIF digitally amplified vehicles
Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models (WITH BASIC AUDIO)
This head unit fitting kit includes:
PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.
Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Kia Sportage (2010-2015) car models (WITH BASIC AUDIO)
This head unit fitting kit includes:
PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.
Complete stereo upgrade fitting kit to install a double DIN aftermarket radio and retain the use of the steering wheel controls in a Kia Cee'd (2012-2016) with OEM factory fitted Navigation systems
This complete head unit fitting kit includes:
PLEASE NOTE: Only suitable for Kia Cee'd (2012-2016) vehicles with OEM factory fitted Navigation systems
FOR Single DIN installation please add a pocket, part number 50-058
Complete stereo upgrade kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in a Kia Sportage (2016 Onwards) car models.
This complete head unit fitting kit includes:
The new INE-W611D navigation system is an amazing all-in-one solution with built-in iGo Primo navigation using TomTom maps, as well as a CD/DVD drive. The 6.5-inch touch-screen displays navigation maps, menus and movies clear and crisp. Enjoy DAB+ digital radio and use authorized apps in your car with Apple CarPlay and Android Auto. Take advantage of your two USB ports, allowing you to charge your phone and playback music from your USB stick at the same time.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The KD-DB922BT is a musical all-rounder in every respect. It provides crystal-clear radio reception via DAB+ or FM. Thanks to Bluetooth, music can be played back from a cell phone - hands-free function for two phones included! Thanks to the Amazon Alexa function, the digital voice assistant can now also be used conveniently via the car radio.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering.
JVC KD-X282BT (Mechless) Single DIN car stereo head unit with Bluetooth hands-free calling & music streaming, Spotify app control, iPhone music & charging and Android smartphone music playback.
Spotify app users will be delighted to know that this receivers is fully compatible for playback and music search.
PLEASE NOTE: There is no CD mechanism included in this model. However, this does allow us to reduce the depth of the product to 100mm which will fit into vehicles having less dashboard audio space than traditional products.
This JVC KW-M565DBT Short Body Double DIN stereo head unit comes with integrated DAB+ tuner for crystal clear radio listening and Bluetooth technology for hands-free calling and wireless music streaming.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DMX5020DABS Double DIN radio Head Unit with DAB and enhanced wired Smartphone connections (Apple Carplay/ Android Auto) 6.8" Touch screen with wired Apple CarPlay and Android Auto, Spotify Direct Control, DAB/FM/MW/LW Radio, Bluetooth hands-free calling and music streaming, iPod/iPhone music playback and USB.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DMX-8021DABS Double DIN radio Head Unit with DAB and enhanced wireless Smartphone connections (Apple Carplay/ Android Auto)
7 inch double DIN touchscreen with DAB+ Radio, Bluetooth Android Auto and WIFI Wireless Apple CarPlay.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DMX7722DABS Double DIN radio Head Unit with DAB+ and enhanced wireless Smartphone connections (Apple Carplay/ Android Auto)
6.8 inch Double DIN touchscreen with DAB+ Radio, Bluetooth, WIFI Wireless Apple CarPlay and Android Auto.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DPX-7300DAB Double DIN radio Head Unit with CD/USB Receiver, Bluetooth, DAB+, Spotify & Amazon Alexa ready
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood KDC-BT460U Single DIN car stereo head unit CD/USB Receiver with Bluetooth technology for hands-free phone calls & music streaming.
Enjoy convenient control. Built-in Bluetooth technology for hands-free calls and music streaming and the ability to use your smartphone like a wireless remote control. The Digital Sound Processor, Time Alignment & 13-Band EQ ensures you of optimal sound tuning enhancements.
The Kenwood KDC-BT760DAB allows you to enjoy convenient control and crystal clear Digital Radio DAB+. Built-in Bluetooth technology for hands-free calls and music streaming gives the ability to use your smartphone like a wireless remote control and interactions with Amazon Alexa cloud-based voice service. Digital Sound Processor, Time Alignment & 13-Band EQ ensures allows you optimal sound tuning enhancements.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Kenwood KMM-BT408DAB allows you to enjoy convenient control and crystal clear Digital Radio DAB+. Built-in Bluetooth technology for hands-free calls and music streaming gives the ability to use your smartphone like a wireless remote control. Digital Sound Processor, Time Alignment & 13-Band EQ ensures allows you optimal sound tuning enhancements.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Pioneer DEH-S240BT is a single-DIN CD Player, Bluetooth, USB combined stereo, setting new standards in terms of audio performance and connectivity.
It’s very easy to use and control. Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone.
For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.
This Single DIN Bluetooth hands-free and DAB combined after market stereo is very easy to use and control. Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone.
For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
Pioneer DMH-A240BT Double DIN stereo head-unit with Bluetooth and Smartphone connectivity. Mechafree 6.2” Clear Resistive touchscreen multimedia player, with easy smartphone connectivity via a simple USB cable supporting Smartphone Mirroring, Bluetooth, 13-band GEQ, advanced audio features and premium audio quality.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The "Short Chassis" Double DIN Pioneer DMH-A340DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which allows you to mirror & control your smartphone from your dashboard in a convenient way. It plays DAB/ DAB+ Digital Radio and audio/video content from USB devices. Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Pioneer FH-S820DAB double DIN car stereo head unit with Bluetooth and DAB
Double DIN car stereo head unit with DAB/DAB+, Bluetooth, Multi-colour illumination, USB input, Spotify and Pioneer Smart Sync app supported. Compatible with Apple and Android devices.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Pioneer MVH-S420BT sets new standards in terms of audio performance and connectivity. Nevertheless, it’s very easy to use and control thanks to its useful display and large Rotary Commander.
Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone. You can even connect two Bluetooth phones simultaneously.
For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.
The Pioneer MVH-S520DAB is a Single DIN car stereo head unit back with lots of features including DAB/DAB+, Bluetooth, multi colour illumination, USB, Spotify, Pioneer Smart Sync App and is also compatible with Apple and Android devices.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Double DIN SPH-DA250DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, Android Auto, WebLink and Waze (Via the Apple CarPlay or Android Auto App) from your dashboard in a convenient and safe way. It plays DAB/DAB+ Digital Radio, audio/video content from USB devices.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
This Double DIN Pioneer AVH-Z5200DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, Android Auto, WebLink and Waze (Via Apple CarPlay or Android Auto) from your dashboard in a convenient and safe way. It plays DAB/DAB+ Digital Radio, audio/video content from CDs, DVDs and USB devices.
Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Sony DSX-A510BD (Mechless) Single DIN car stereo head unit with DAB, Bluetooth, USB
Keep in touch on the road with Dual Bluetooth® connectivity from the DSX-A510BD. Wirelessly connect your first phone to play music, get directions and communicate with contacts. Add a second phone to make additional hands-free calls on the move.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Discover Sony's XAV-AX3250DB 7 Inch Touchscreen Double DIN head unit with CarPlay, Android Auto, DAB+ screen mirroring, DAB radio and works with compatible iPhone and Android smartphone. Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation, and leaves plenty of room for cabling and other accessories in the space behind the display.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Enjoy smooth and simple control for every journey with this Sony XAV-AX5650 head-unit (SLIM CHASSIS) with wired Carplay and Android Auto. Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation, and leaves plenty of room for cabling and other accessories in the space behind the display.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Sony XAV-AX8050D head unit provides a large 8.95 inch display and smartphone connectivity all in a single DIN installation.
- 8.95-inch Large Display with “Antiglare” Clear and Fast Responsive Touchscreen
- Android Auto, Apple CarPlay and DAB+ Radio
- WebLink 2.0™ Cast
- 3-way Adjustable Display Mount for Flexible Installation
- Single DIN Rear Chassis Holds an Oversized LCD
- Rear View Camera Ready with Adjustable Parking Guide Lines
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The MEX-N7300BD brings improved communication and illumination to any journey. Dual Bluetooth® lets you connect a second smartphone wirelessly, so you can make and receive hands-free calls from either phone. Tune into DAB+ radio for even more choice and better audio quality. The receiver picks up your DAB favourites too.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
SOT adapter cable for 2017 onward Hyundai cars to allow the fitting of an aftermarket handsfree bluetooth phone kit.
SOT adapter cable for 2017 onward Kia cars to allow the fitting of an aftermarket handsfree bluetooth phone kit.
ISO T cable for some Hyundai and Kia cars
This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.
Plug and play voltage stabiliser on ISO power cable
For use when fitting an aftermarket radio in cars with automatic engine 'Start/Stop' technology.
For cars that have a drop in voltage on both ignition and permanent feeds during the engine cranking during the start/stop cycle causing the radio to turn off.
Female ISO Lead harness (with Butt Connectors)
Allows you to connect bare Power and speaker wires to the Female ISO connector.
Useful for repairs and custom installs
Car radio iso lead for Hyundai and Kia cars cars made between 1998 and 2006
Connects the new radio to the cars original connector
Car radio iso lead for Hyundai and Kia cars cars made between 2005 and 2009.
This connector has two sizes of pins
Connects the new radio to the cars original connector
Audio cable for Hyundai cars.
Converts the factory harness to female ISO connectors for connecting an after-market European car radio.
Use for cars with the standard audio system without Steering wheel control.
This plug and play cable allows you to connect an aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.
This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.
Fits most Hyundai cars made from 2008 onwards.
PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.
Audio cable for Hyundai cars with USB/AUX retention
Converts the factory harness to female ISO connectors for connecting an after-market European car radio.
Use for cars with the standard audio system without Steering wheel control.
Includes AUX / USB retention for connecting original AUX / USB connector to the new aftermarket radio.
Radio replacement adapter cable for Kia cars 2017 onward. Use to connect an aftermarket stereo upgrade.
Car radio iso lead for Hyundai and Kia cars made between 2005 and 2009 with Amplifier fitted under drivers seat.
This connector has two sizes of pins
Connects the new radio to the cars original connector
Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.
Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for steering control input by resistive learning.
Only to be used with InCarTec 20-XXX-SWC series ISO steering wheel control cables
NOT FOR USE WITH PIONEER OR ALPINE RADIOS
Amplifier bypass cable for Kia and Hyundai models with digital amplifier under the passenger seat .
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier.
NO INSTRUCTIONS are included on amplifier location. Cars with amplifiers in rear quarter panel (IX35) will need an extra extension cable 10-149/2.5
Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)
PLEASE NOTE: For a bulk pack of 10, please use 21-037B
Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)
This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.
The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car.
PLEASE NOTE: For a bulk pack of 10, please use 21-123B
Hyundai /Kia radio antenna cable adapter for converting the original car radio plug to use with aftermarket head units.
Hyundai/Kia radio antenna cable adapter for converting the original car cable to use with aftermarket head units.
Hyundai Grandeur/Kia Magentis radio antenna cable adapter for converting the original car cable to use with aftermarket head units.
Recoil 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.
This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.
Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage as well as interfacing with the steering wheel controls.
This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.
MUST BE USED WITH PART 23-235
Suitable for Kia Sportage (SL) 2010 - 2015 with original OEM amplifier, including models with Infinity Sound Amplifier.
Amplifier Interface compatible with various Hyundai and Kia vehicles built from 2012 onwards.
NOT USED AS A STAND ALONE PART
Only for use with a 23 series amplifier interface for Hyundai or Kia. Please see full description for which interfaces this is compatible with.
Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage or Hyundai iX35 WITH ISO CONNECTIONS ON THE ORIGINAL RADIO as well as interfacing with the steering wheel controls.
This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.
Suitable for Kia Sportage (SL) or Hyundai iX35 2010 - 2015 with original OEM amplifier and ISO connections, including models with Infinity Sound Amplifier.
Push fit 3.5mm stereo dash board socket with jack to jack for connection to car radio.
750mm cable length
Special Interface for Hyundai and Kia Vehicles to maintain the cars existing AUX sockets but used them with a new aftermarket head-unit.
This unit uses the cars original housing
Adapts Kia & Hyundai original USB socket for use with aftermarket head-unit or navigation systems.
This unit uses the cars original housing
Hyundai Velostar, Kia Picanto, Kia Sportage
Kia Soul . Maintain the cars existing AUX and USB sockets but use them with a new aftermarket head-unit.
This unit uses the cars original housing
Hyundai/Kia 2008-2017 USB Retention Harness.
Used when you want to retain the OE USB port on select Hyundai/Kia vehicles (radio utilizes rear USB input). RCA’s allow the user to retain their factory installed 3.5mm jack. (Aftermarket radio must have Aux in)
Retains factory installed 3.5mm jack
Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.
iPhone lightning to USB A charger and data cable
FLEXIBLE METAL JACKET
Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Kia and Hyundai car models, when replacing with a new aftermarket head unit.
This interface is compatible with various Kia and Hyundai car models with an original factory fitted AVN head unit with a 24pin connection.
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars with a factory fitted navigation system.
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars without factory fitted navigation systems.
This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.
PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671
Adapter cable to pair an InCarTec 29-6XX series steering wheel remote control interface
Use this patch lead on head units with resistive programming such as Chinese branded stereo like Xtrons, Eonon, Pumpkin, Joying etc. that have KEY 1 and KEY GROUND
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Alpine stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Clarion stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket JVC stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Kenwood stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
Pioneer patch lead to be used with an In Car Tec 29-6xx or 29-7xx series steering wheel control interfaces.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Sony stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
ZENEC patch lead to be used with In Car Tec 29 series steering wheel controls
PHILIPS patch lead to be used with In Car Tec 29 series steering wheel controls
This patch lead gives out a fixed voltage between the tip and base of the 3.5mm jack plug. Use with self learning programable aftermarket units like Blaupunkt. Also for Kenwood, Sony units using their "CUSTOM" setting for steering control input
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.
Suitable for Kia Sorrento (03-06) & Carens (03-06) car models
NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.
Sonata (06>) Sante Fe (06-09)
Kia Sedona, Sorrento (06-09) Carens (06>)
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and phono low level speaker wiring to connect the car to the aftermarket head-unit
Hyundai Santa Fe and Kia Sorento (2006-2009) car models with factory fitted amplifiers
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit as well as the vehicles phone functions.
Suitable for various Hyundai/Kia (2009 Onwards) car models fitted with Mini ISO and iso connectors.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.
Suitable for Kia Cee'd and Pro_cee'd (2007-2009) car models.
PLEASE NOTE: For Kia Cee'd facelift models from 2010 Onwards please use 29-675
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes Phone commands for compatible Bluetooth head units.
Suitable for various Hyundai and Kia car models
PLEASE NOTE: This interface is not suitable for cars with an original amplifier
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit.
Suitable for Kia Picanto (2011-2017) Sportage (2016-2022) and Hyundai i20 (2014-2018) car models with factory fitted Satellite Navigation.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of the original steering wheel buttons with a new aftermarket head-unit.
Also includes PHONE commands for compatible Bluetooth head-units, speed pulse. reverse switch and handbrake outputs.
Suitable for a Kia C'eed (2012-2017) and Kia Sportage (2010-2015) with an original navigation head unit and no amplifier.
PLEASE NOTE: This interface is not suitable for cars with an original amplifier
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
Suitable for Hyundai and Kia (2016 onwards) car models (WITH NEW STYLE WHITE CONNECTOR)
Pioneer patch lead for 29-CT series steering controls
Suitable for Pioneer head-units that are steering wheel remote ready.
Can only be used with our 29-CT series steering wheel controls
Universal patch lead for 29-CT series steering controls
Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready.
Complete (20mm2) 4 Gauge Amplifier Installation Kit
Kit contains
- 5 m power cable transparent-red
- 1 m power cable transparent-blue
- 5 m twisted RCA cable goldplated with remote
- 1 Mini ANL fuse holder
- 1 fuse 60 A
- 4 terminals
Amplifier wiring kit 10mm2 (8 Guage)
- 5 m power cable ECO red-transparent
- 1 m power cable ECO blue-transparent
- 5 m double shielded cinch cable with remote
- 1 ANL fuse holder gold-plated
- 1 fuse 40 A
- 2 eyelets 10 mm2, d = 8.5 mm
- 2 forks 10 mm2, d = 4 , 3 mm
A pair of front or rear door car speaker adapter panels for 165mm speakers.
MDF panels for Kia Soul and Magentis cars to fit 165mm speakers to the front and rear doors. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
A pair of front or rear door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits Kia Soul and Sportage vehicle models. Please see long description for compatibility and fitment details.
A pair of front or rear door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits Hyundai i20, i10 and Kia Picanto vehicles. Please see long description for compatibility and fitment details.
A pair of front door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Suitable for Kia Sportage and Kia optima (2010-2016) car models. Please see long description for compatibility and fitment details.
A pair of front door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits Kia Carens vehicles. Please see long description for compatibility and fitment details.
A pair of front door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits Kia Rio vehicles. Please see long description for compatibility and fitment details.
Speaker adapter cables; used to connect after market speakers to the original loom on various Hyundai and Kia models.
Fits models built after 1998 See long description
Speaker adapter cables; used to connect after market speakers to the original loom on various Hyundai and Kia models.
Fits models built after 2012 See long description
Speaker adapter cables; used to connect after market speakers to the original loom on various Hyundai and Kia models.
Fits models built after 2014. See long description
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket JVC stereo with a single wire steering control input.
Universal pocket to enable you to fit a single DIN radio into a double DIN kit
This pocket is suitable for fascia kits with side ifixng brackets
COLOUR: MATT BLACK
Kia Sportage (95-00)
Replacement car audio fascia to enable you to change the original radio in the car to a single din aftermarket version
BLACK
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
Fits Kia Picanto (2006-2008) car models
COLOUR: MATT BLACK
PLEASE NOTE: FOR DOUBLE DIN INSTALLATION THE CENTRAL FASCIA BAR WILL NEED TO BE CUT OUT
Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version
Fits Kia Sportage 2nd Gen Facelift (2008-2010) car models
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version
Fits Kia Carens 2nd Gen (2006-2013) car models
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version
Fits Kia Picanto (2008-2011) car models
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double or Single DIN aftermarket version
Fits Kia Optima 2015 - 2019 (Cars with automatic climate controls will loose the climate control display which is displayed on the original radio)
COLOUR: MATT BLACK with SILVER TRIM
Replacement car audio fascia to enable you to change the original radio in the car to a Double or Single DIN aftermarket version
Fits Kia Optima 2014-2015 without OEM satellite navigation
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
The fascia uses side fixing brackets so that no radio cage is needed.
Fits Kia Optima 2010 - 2014 (RIGHT HAND DRIVE ONLY) vehicle models.
COLOUR: MATT BLACK
Fits Kia Rio (2017 Onwards) car models
COLOUR: MATT BLACK
Fits Kia Picanto (2017 Onwards) car models without original touch screen radio.
COLOUR: PIANO BLACK
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish
Includes side fixing brackets so no fitting cage is required. Kit also includes the hole for the 'Start/Stop' button where fitted and a blanking plug if it is not.
Fits Kia Picanto - second generation (TA) 2011-2017 vehicle models
COLOUR: MATT BLACK
PLEASE NOTE: This fascia only fits Right Hand Drive vehicles
This fascia has Side fix brackets so no fitting cage is required
Fits Kia Sportage (2005-2008) Rio (2006-2009) and Hyundai Accent (2006-2009) car models
COLOUR: MATT BLACK
Fits Kia Carens 2nd Gen (UN) (2007 - 2013) car models
COLOUR: MATT BLACK
Fits Kia Sportage 2nd Gen Facelift (2008-2010) car models
COLOUR: MATT BLACK
Fits Kia Sportage 2nd Gen Facelift (2008-2010) car models
COLOUR: SILVER
Replacement car audio fascia trim and cage kit to enable you to change the original radio to a double DIN aftermarket version
Fits Kia Picanto 1st Gen (SA) (2008 - 2010) car models.
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
This fascia is supplied with a fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.
Fits Kia Cee'd (2007-2009) and Kia Pro_cee'd (2008-2012) car models
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
This fascia is supplied with a fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.
Fits Kia Cee'd (2009-2012) and Kia Pro_cee'd (2008-2012) car models
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia uses side fixing brackets so no radio cage is needed for installation.
Fits Kia Sportage 3rd Gen (SL) (2010 - 2015) car models
COLOUR: DARK GREY
For single DIN installation a pocket will need to be purchased separately
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia uses side fixing brackets so no radio cage is needed for installation.
Fits Kia Sportage 3rd Gen (SL) (2010 - 2015) car models
COLOUR: METALLIC SILVER
For single DIN installation a pocket will need to be purchased separately
This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.
Fascia gap size: 172mm x 98mm
Fits Kia Soul 1st Gen (2012-2014) car models
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.
This fascia includes side fixing brackets so no fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.
Suitable for Kia Carens 3rd Gen (RP) (2013 Onwards) car models
COLOUR: MATT BLACK
This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.
Fits Kia Soul 2nd Gen (2014-2019) car models
COLOUR: MATT BLACK
PLEASE NOTE: Only suitable for cars with original basic head unit
Please use a pocket for Single DIN installation
This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.
The fascia is designed to fit Kia Sorento (2013-2015) car models.
COLOUR: MATT BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.
Fits Kia Sorento 3rd Gen (2016 Onwards) car models (WITHOUT ORIGINAL 7 INCH TOUCHSCREEN)
COLOUR: MATT BLACK
PLEASE NOTE: Not suitable for cars with original OEM 7 inch touchscreen
Fits Kia Cee'd and Pro_cee'd (2012-2018) car models
COLOUR: MATT BLACK
PLEASE NOTE: FOR SINGLE DIN INSTALLATION PLEASE ADDED A POCKET, PART NUMBER 50-058
Suitable for Kia Sportage (2016 Onwards) car models
COLOUR: MATT BLACK
Interior windscreen glass mount DAB radio antenna aerial suitable for aftermarket DAB car radios.
Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.
PLEASE NOTE: For a bulk pack of 5, please use 70-923B
DIN to DAB & FM antenna aerial amplifier splitter/ radio distributor.
This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.
PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas
For a bulk pack of 5, please use 70-928B
Panel clips normally found on the back of original car audio facias.
10 pcs per pack
M5 x 60mm male threaded bolts for use as extra long radio support bolts.
These bolt screw into the back of the standard Din or Double Din radio. They then help support the new radio by locating into the OEM support slot in the car
10 pcs per pack
Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.
Momentary panel mount rocker switch. Push and hold to activate the switch, springs back to original position on release. 19mm hole diameter.
ON/OFF panel mount toggle rocker switch. 19mm hole diameter.
100m roll of Automotive spec speaker cable.
2 x 24/02 copper Figure 8 speaker cable
Black , Black Red
100m roll of automotive spec thinwall cable.
24/02 copper BLACK
0.75mm2 , 14 amp
100m roll of automotive spec thinwall cable.
24/02 copper BLUE
0.75mm2 , 14 amp
100m roll of automotive spec thinwall cable.
24/02 copper Red
0.75mm2 , 14 amp
100m roll of automotive spec thinwall cable.
24/02 copper YELLOW
0.75mm2 , 14 amp
50m roll of automotive specification thinwall cable.
28/03 copper BLACK
2.00 mm2 , 25 amp
50m roll of automotive spec thinwall cable.
28/03 copper Red
2.0mm2 , 25 amp
Ideal for -12V GROUND cable on active under-seat sub-woofer boxes
30m roll of automotive spec thinwall cable.
44/03 copper BLACK
3.0mm2 , 40 amp
Ideal for -12V GROUND cable on active under-seat sub-woofer boxes
30m roll of automotive spec thinwall cable.
44/03 copper RED
3.0mm2 , 40 amp
30m roll of automotive spec thinwall cable.
56/03 copper BLACK
4.0mm2 , 40 amp
30m roll of automotive spec thinwall cable.
56/03 copper Red
4.0mm2 , 40 amp
30m roll of automotive spec thinwall cable.
84/03 copper BLACK
6.0mm2 , 50 amp
30m roll of automotive spec thinwall cable.
84/03 copper Red
6.0mm2 , 50 amp
In-Line standard (ATO, ATC, APR) blade fuse holder.
Black 10pcs
(picture shows 2 pcs clipped together)
In-Line standard (ATO, ATC, APR) blade fuse holder.
Black 100pcs
(picture shows 2pcs clipped together)
These packs of 10 water resistant ATC/ATO 10/15 AMP Inline Fuse Holders are great for hardwiring accessories into the fuse box.
Made with heavy duty 16 AWG wire and a tight-fitting water resistant lid, these holders are great for locating fuses in areas where dust, moisture or water ingress could cause problems, meaning they can withstand the harshest of environments both off-road and offshore.
5 Pin Relay Holder (12v 80amp)
Terminates in bare wires, approximately 300mm in length and 12awg.
High-quality Mini ANL and ATC Fuse holder for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 High-quality Mini ANL and ATC Fuse holders for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 high-quality Dual ATC Fuse holders for 10mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
PLEASE NOTE: Sold individually, colours and fragrances can vary
Auto Shine Car Air Freshener Extra Long Lasting Fresh Scent
Auto shine air fresheners add a pleasant fragrance, refreshing the environment while removing unpleasant smells. Their long lasting fragrance can be used in your car, boat or home.
Digital Multimeter (500V AC/DC Manual Ranging)
A small, low cost multimeter, a useful tool for testing and finding issues with car electrics and audio systems, and an essential tool for amateurs as well as professionals.
Comes with test probes. Requires a 9V PP3 battery - not included.
20mm HSS hole saw cutter drill bit.
Made from High Density Steel, this hole saw can be used to cut 20mm holes, such as those needed when fitting our CA-9401.V2 reversing cameras.
A must have for any installer who has to remove plastic trim.
4 Pack of Panel tools to help remove dashboard trim panels.
Flat end and forked end.
Bright orange design makes it easy to find when working in a car.
Full professional 13 piece set of trim removal tools and pry bars for removing plastic trim without damage
13 Pack of Panel tools to help remove dashboard trim panels.
A selection of forked, flat and wedge ends, with two solid pry bars.
Supplied in a black carrying case
The semi-professional set is a must have for any installer who has to remove plastic trim.
6 Pack of Panel tools to help remove dashboard trim panels.
A selection of forked, flat and wedge ends.
Pioneer GM-D1004 400W Class FD 4-Channel amplifier with TVC concept and input sensor.
The GM-D1004 is a compact amplifier that can easily be installed behind the dashboard of your car. Power can be taken from the console panel thanks to its protection control system, which suppresses excess current during large output. Additionally, it prevents extreme overheating of parts and maintains stable operations.
Recoil’s REA600.4 is a powerful, efficient, and highly reliable four channel class A/B full-range amplifier. Capable of powering an entire aftermarket upgraded speaker system in a vehicle, it packs the power that will allow you to be loud and let your speakers come alive. Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end.
• Class A/B 4-Channel Amplifier
• RMS Power at 2 Ohms: 130 Watts x 4 Channels (14.4v)
• RMS Power at 4 Ohms: 95 Watts x 4 Channels (14.4v)
• RMS Power at 4 Ohms (Bridged): 260 Watts x 2 Channels (14.4v)
Discover the Express 165 EC from BLAM, an efficient 6.5" (16.5cm) coaxial system with 2 O impedance. This high-quality set consists of two 165 mm woofers, coaxially mounted 20 mm soft dome tweeters and integrated 6 dB/octave high-pass crossovers. You will be impressed by the maximum output of 120 W and the rated output of 60 W. In addition, the system offers an impressive frequency range of 65 Hz - 31 kHz and a sensitivity of 93.5 dB. Whether woofer or tweeter, each element is carefully designed and equipped with special features to deliver the best possible acoustic performance.
Discover the Express 165 ES from BLAM, a high-class speaker set that stands for impressive sound quality. With its 6.5" (16.5cm) front system set, this 2-way model guarantees a maximum output of 120W and a nominal output of 60W. It impresses with its high sensitivity and an amazingly wide frequency range from 65 Hz to 31 kHz. The set includes two 165 mm woofers, two 20 mm soft dome tweeters and two separate crossovers with high-pass 6dB filtering, ensuring the optimum listening experience.
This kit is composed of two 165 mm (6.5”) woofers, two 20 mm (3/4”) soft dome tweeters and two separated high pass 6dB/octave crossovers
The RELAX 165R2C from BLAM is a high-quality 6.5" (16.5cm) coaxial system that is characterized by its technical features and sophisticated design. With a maximum output of 150 W and a nominal output of 75 W, this system guarantees a clear and balanced sound. Its frequency response ranges from 60 Hz to 25 kHz and its sensitivity is 95 dB. The Relax 165 R2C contains 2 x 165mm woofers, 2 x 20mm coaxially mounted soft dome tweeters, and integrated crossovers with 6 dB per octave. A product with remarkable acoustic performance and high quality materials to meet your high demands.
Immerse yourself in the world of optimum sound with the Relax 165 RS 165mm (6.5 inch) speaker set from BLAM. The high-quality components are impressive, including 165 mm woofers, 20 mm soft-dome tweeters and adjustable crossovers for a customizable sound experience. With a maximum output of 150 W and a frequency response of 60 Hz to 25 kHz, this set ensures authentic, room-filling sound. Another highlight is the durable construction with glass fiber reinforced composite material and treated cellulose pulp. Experience the perfect symbiosis of technology and design in this unique speaker set.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
With the RELAX 165 RX, BLAM presents an impressive 6.5 Inch (16.5cm) speaker system. Combining 2x 165mm woofers, 2x 20mm soft dome tweeters and specialized crossovers, this system unleashes its full sonic capabilities. Adjustable tweeter levels and a highly sensitive 2-way component configuration make it an ideal component for any demanding audio setup. Its technical spectrum ranges from a maximum output of 150 W to a frequency response of 60 Hz - 25 kHz.
Upgrade your car audio system with the RELAX 690RC coaxial speakers from BLAM. These high-efficiency 6 x 9 inch speakers feature a high-quality cellulose pulp membrane, combined with peripheral butyl suspension. The generous size of the magnet (85x17mm) contributes to the speaker gaining high efficiency and high-power handling. The 2O voice coil doubles the power of all OEM radios. 20 mm (3/4 ") silk dome tweeter features an ultra-powerful neodymium motor, a soft dome and a very lightweight voice coil for the use of copper-aluminium alloy (CCAW) wire for hi efficiency (25 mm (1" silk dome tweeter on 690RC).
The BLAM RELAX CRS27A is designed to fit inside the spare wheel well of most vehicles with the spare wheel mounted under the false floor of the boot. This works well in hatchbacks, SUVs, people carriers and wagons which don't have the luggage compartment sealed away from the passenger compartment, giving solid base kick, without being overbearing and not taking up space in the cargo area on under the seats. Mounted in a die cast aluminium enclosure with a 300w integrated amplifier this subwoofer creates a powerful, dynamic and enjoyable listening experience. An external remote with level control, base boost and phase is included with a 300mm extension.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE L20 DB from BLAM is an impressive 8" (20cm) Dual Voice Coil subwoofer that stands out with its special combination of high-quality features. Crafted in a robust aluminium basket, it features a treated paper cone, a foam surround and a durable "Conex "-Spider. Thanks to its double magnet motor and its optimized adaptation to 10 L to 25 L closed enclosures, it offers remarkable sound quality. With a maximum power of 500 W and a high sensitivity of 89 dB, the LIVE L20 DB reproduces low frequencies with high efficiency and volume, making it a first-class addition to any car audio setup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE L25 DB 10 inch (250 mm) Dual Voice Coil subwoofer from BLAM brings musical perfection into the car audio system. By using advanced technology and high-quality materials such as an aluminium basket, a specially treated paper membrane and a foam suspension, this subwoofer offers first-class sound quality. In addition, it has a 60mm dual voice coil and a magnetic dual motor for increased performance. Optimization for use in 15 to 45 L closed enclosures enables a wide range of applications and ensures both deep and precise bass sound, making it a first-class addition to any car audio setup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Discover the LIVE L30 DB subwoofer from BLAM, a 12 Inch (300mm) subwoofer for a rich car audio experience. This model features a special construction with an aluminium basket, treated paper cone and foam suspension for long-lasting sound quality. Equipped with a 60 mm double voice coil on an aluminium carrier and a double magnet motor, this subwoofer is optimized for closed cabinets between 20 L and 50 L. With a maximum output of 800 W and a frequency response of 45Hz-500Hz, the L30 DB is an impressive addition to any sound system.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Discover the LIVE LA 1000 from BLAM, a 1-channel (Monoblock) amplifier known for its robust build quality and sleek design. With a monumental power reserve, this Class-D amplifier ensures effortless transmission of music in its finest details, especially bass and low frequencies. Thanks to its large radiating surface, it offers optimal cooling, stability and performance. With a cabled remote control included, the LIVE LA 1000 is a perfect symbiosis of aesthetic design and technical performance.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE LA500 500W Class D Monoblock amplifier from BLAM has been developed to take into account all of the manufacturers parameters. The result is a monumental 1-Channel amplifier that transmits natural music in great detail. Bass and extreme bass are faithfully reproduced with impressive force and due to their large volume have a large dissipation surface which ensures their cooling, stability and performance. With a peak power of 500W, the LA500 benefits from a strong, robust design and a high-end finish to match.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE LSP20 from BLAM is an 8 Inch (200mm) subwoofer that takes your audio experience to the next level. Equipped with a power output of up to 500W and a frequency response of 35 to 500 Hz, this robust subwoofer delivers impressive audio detail that enriches any sound system. Special features such as an injected polypropylene cone, a steel basket and a 50 mm (2") dual voice coil make it the perfect addition for any sound enthusiast. It is ideally optimized for closed cabinets from 10 to 25 litres.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Immerse yourself in the world of outstanding bass performance with the LIVE LSP25, a 10-inch subwoofer from the renowned manufacturer BLAM. With a maximum output of 600 W and a rated output of 300 W you can expect powerful bass with every song. This is complemented by precise components such as the injected polypropylene cone and a 60 mm dual voice coil on an aluminium carrier. The LSP25 is optimized for use in a closed cabinet that varies from 15 to 45 litres, bringing the impressive bass directly to your home.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE LSP68 DSP amplifier from BLAM offers the best performance you can get from your cars audio system with high-quality audio processing technology. With 6 channel input and 8 channel output, the BLAM LSP68 DSP offers detailed sound adjustment. With time alignment, phase adjustment and multiple EQ bands, you can provide a perfect listening experience for every seat. Thanks to its special software and easy to use interface you can fine-tune your sound settings according to your personal preferences. Easily control volume, EQ settings, crossover frequencies and more.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The RELAX MSA20 20 cm extra-slim subwoofer with integrated 240 W amplifier from BLAM makes it easy to improve the quality of your original audio installation by adding bass without reducing too much space in the vehicle. At a height of only 65mm (66mm with Grill) the MSA20 slim design allows for easy installation in multiple locations throughout the vehicle. It fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The RELAX MSA 25 P 25cm extra-slim subwoofer with integrated 360 W amplifier from BLAM makes it easy to improve the quality of your original audio installation by adding bass without reducing too much space in the vehicle. At a height of only 68mm (78mm with Grill) the MSA 25 P slim design allows for easy installation in multiple locations throughout the vehicle. It fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The RELAX MSP 25P extra-slim subwoofer from BLAM makes it easy to improve the quality of your original audio installation by adding bass without reducing too much space in the vehicle. At a height of only 68mm (78mm with Grill) the MSP 25P slim design allows for easy installation in multiple locations throughout the vehicle. It fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup.
We recommend using this with the BLAM RA 251D mono amplifier (BL-RA251D)
The RELAX R12 from BLAM, a 12 Inch (300mm) subwoofer sets new standards in terms of sound quality and performance. This technical masterpiece is specially designed to offer you a unique listening experience. With excellent technical data such as a maximum output of 500 W and a sensitivity of 94 dB, the RELAX R12 is impressive across the board. It's about a sound experience that is achieved by a reinforced cellulose fiber cone and a 50 mm voice coil on an aluminium carrier. With an impedance of 2 O and a frequency response of 30 Hz to 500 Hz, the subwoofer gives you the full range of sound you want and deserve.
The Relax R8EL is a high-performance 8" (210mm) subwoofer from BLAM. Designed for compact enclosures, this 2 ohm subwoofer offers an impressive maximum power of 300W. With features such as steel basket, treated pulp cone and butyl rubber surround , this subwoofer is unique in its field. It also stands out from others thanks to its 40 mm voice coil on a fiberglass support and an optimal operating volume of 10 to 13 litres in a bass reflex housing. The R8EL from Blam is perfect for audiophiles who value focus on quality and performance. Combined with a BLAM amplifier, this subwoofer creates a powerful, dynamic and enjoyable listening experience.
Discover the RELAX RA 1202 D amplifier from BLAM, the perfect solution for demanding car audio fanatics. This powerful, robust and compact 2-channel amplifier offers outstanding audio performance thanks to modern technology. Despite its compact design, the amplifier is capable of delivering impressive dynamics and performance without any dropouts. Thanks to its high efficiency, it will provide the power required to reproduce the full dynamics of your favourite recording combined with unheard of reliability. The RA 1202 D amplifier delivers impressive sound quality and meets even the highest demands.
The super-slim RELAX RS10.4 10 inch subwoofer from BLAM will serve as a low-frequency foundation that will provide your system with ultra-low frequency range. At an installation mounting depth of just 66mm, this speaker is specially designed for extremely compact housings to take up minimal space in your vehicle. With a maximum output of 300W, an impedance of 4 O and a frequency response of 35 Hz to 500 Hz, this extra-slim subwoofer gives you the full range of sound you want and deserve.
This universal reversing camera is designed to be used on any 12v vehicle. it's clever adjustable butterfly bracket design allows for it to be discretely mounted at the rear of any vehicle (normally next to the rear number plate lights).
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
UK & European car number plate/ registration plate frame with built in rear view camera.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: On most cars you will need to drill a hole to pass the cable into the vehicle
Universal push fit reversing camera designed to be used on any vehicle with a 12v feed, with the camera having a built in 6 volt adapter.
It's clever 20.5mm push fit design means it fits perfectly on any under-hang surface like just above a car number plate.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
Universal push fit reversing camera designed to be used on any vehicle with a 12v feed, with the camera having a built in 6 volt adapter.
It's clever 20.5mm push fit design means it fits perfectly on any under-hang surface like just above a car number plate.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
Reverse view camera for various Hyundai and Kia cars to fit in place of the rear number plate light.
Whilst we do our best to make sure our product compatibility listings are as accurate as possible, there may still be exceptions. Different vehicle shapes, such as saloon, estate, coupe, may require different number plate cameras. Please check that the image of the camera matches the existing number plate light on the vehicle.
Reverse view camera for various Hyundai and Kia cars to fit in place of the rear number plate light.
Reverse view camera for various Hyundai and Kia cars to fit in place of the rear number plate light.
Whilst we do our best to make sure our product compatibility listings are as accurate as possible, there may still be exceptions. Different vehicle shapes, such as saloon, estate, coupe, may require different number plate cameras. Please check that the image of the camera matches the existing number plate light on the vehicle.
Reverse view camera for various Hyundai, Kia and SsangYong cars to fit in place of the rear number plate light.
Whilst we do our best to make sure our product compatibility listings are as accurate as possible, there may still be exceptions. Different vehicle shapes, such as saloon, estate, coupe, may require different number plate cameras. Please check that the image of the camera matches the existing number plate light on the vehicle.
Special rear view camera specially designed for Kia Carens (2006-2020) car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional parking guidelines which can be enabled or disabled.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Special rear view camera specially designed for Kia Sportage (2010-2015) and Kia Sorento (2012-2020) car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional parking guidelines which can be enabled or disabled.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Special rear view camera specially designed for Kia Ceed (2012 Onwards) and Kia Rio (2011 Onwards) car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional parking guidelines which can be enabled or disabled.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Special rear view camera specially designed for Kia Rio car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional parking guidelines which can be enabled or disabled.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Reverse view camera for various Hyundai and Kia cars to fit in place of the rear number plate light.
Whilst we do our best to make sure our product compatibility listings are as accurate as possible, there may still be exceptions. Different vehicle shapes, such as saloon, estate, coupe, may require different number plate cameras. Please check that the image of the camera matches the existing number plate light on the vehicle.
Reverse view camera for Kia and Hyundai cars to fit in place of the rear number plate light.
Whilst we do our best to make sure our product compatibility listings are as accurate as possible, there may still be exceptions. Different vehicle shapes, such as saloon, estate, coupe, may require different number plate cameras. Please check that the image of the camera matches the existing number plate light on the vehicle.
Reverse view camera for Kia Sportage cars to fit in place of the rear number plate light.
Universal metal body fixed screw thread camera.
Includes options for Parking lines or Mirror image so can be used as as either a front or rear view camera
Fitment is via a fixed screw thread, meaning it can be fixed in various positions such as on the under hang of a vehicle.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
This universal reversing camera is designed to be used on any 12v vehicle. it's clever adjustable bracket design allows for it to be discretely mounted at the rear of any vehicle (normally next to the rear number plate lights).
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
An additional mounting adapter is needed.
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
This monitor comes with a universal window mount (M-K06) which securely attaches the monitor to the vehicles windscreen
The M-738 is a 7 inch Mirror Monitor designed to easily clip on to the vehicles existing rear view mirror. The 7" TFT panel gives a nice large high resolution colour image. It is thin in thickness but sturdily built. It uses standard phono connectors for the camera and is perfectly suited for cars, small/large vans, HGV’s and transport vehicles reversing systems. It runs on 12 volts only and the camera used with the monitor is usually powered off the reversing light. The monitor clips neatly on the interior mirror giving a discrete rear view system. It has 2 AV channels and channel 2 can be set to come on automatically when reverse is selected.
Clip over rear view mirror monitor for reverse came display.
5 inch display screen.
5 inch standalone windscreen video monitor with suction mount bracket.
These monitors are great to use when installing an aftermarket reverse camera without having to affect the original factory fitted system.
Can be powered from 12v ignition or reverse feed.
Rear view window mount Monitor designed to fit instead of the rear view mirror in panel vans. A self adhesive fixing pad is attached to the windscreen and then the monitor is attached to this.
Includes a cable cover. 2 video inputs. NTSC/PAL auto switch
Pioneer's AVIC-Z7330DAB not only includes detailed built-in European HERE navigation maps, it now takes smartphone connectivity to a whole new level, thanks to built-in Wi-Fi. Forget messy cables hanging across your dashboard, enjoy Apple CarPlay wireless, the Pioneer way. Waze (via Apple CarPlay and Wireless Mirroring) and WebLink can also be enjoyed from modern smartphones, as well as DAB+ radio and wireless Bluetooth.
PLEASE NOTE: No metal cage is supplied with this kit. use 51-012 or 51-013 if you are using a fascia that requires a cage
As this car has ISO connectors as standard you do not need an adapter T cable as it should have been supplied with the hands-free kit
Car Audio Battery / Power cable
8 AWG
Length: 50 metres
Colour: Red
Multicore speaker cable
1mm2 (18 AWG) Color Coded Car Speaker Cable.
Eight Speaker Leads and one Remote Turn-on Lead
Easy Peel Jacket without Cutting Through Inner Wire Jacket.
EIA Standard Color-coded for Quick and Easy Installation
High-Strand for Increased Sound Transfer
6 Metre Length is Ideal for 4-Speaker to Amplifier Installation
Save Installation Time - Only One Cable to Run.Ultra-Flex Outer Jacket for Maximum Flexibility
Length: 6 Metres
Alpine SXE-6925S 6"x9" (160x240mm) Coaxial 280 Watts 2-Way Speakers
A pair of Alpine 6"x9" coaxial speakers, perfect for replacing original 6"x9" speakers fitted to multiple cars, or fitting in parcel shelves with or pre-built 6"x9" enclosures with the supplied speaker grilles
PLEASE NOTE: THESE SPEAKERS ARE SOLD AS PAIRS.
Pack of nuts, bolts, washers and terminals for fitting a pair of speakers and speaker rings.
Contains the following
12x M5 Bolts
12x M5 Flanged Nuts
8x M5 Stainless Steel Washers
4x 2.8mm Insulated Spade Terminals
4x 4.8mm Insulated Spade Terminals
A pair of speaker grilles with removable mesh for 100mm (4 inch) speakers
A pair of speaker grilles with removable mesh for 130mm (5 inch) speakers
A pair of Speaker grilles with removable mesh for 165mm (6.5 inch) speakers
A pair of Speaker grilles with removable mesh for 6 inch by 9 inch (6x9) speakers
The compact PWE-S8 amplified subwoofer system lets you add deep, accurate bass to your sound system without taking up much space in your vehicle.
With the PWE-S8, the high-excursion 8-inch subwoofer and 120W (RMS) gives strong bass output.
With a shallow mount, the PWE-S8 is just 3-inches deep (at deepest point), 13.5-inches wide and 9-inches tall - completely application ready. This compact subwoofer system works well under or behind the seat of a pickup truck, in a sedan trunk, or in the hatch of an SUV.
The side panel offers easy access to RCA and auto-sensing speaker inputs. The side panel also gives access to Phase, Gain, LP Crossover and Remote Sub Level controls for greater flexibility during installation.
Choosing a bass box can be hard as not many people sell them and ideally they need to be built by people who know subwoofer parameters, box design and understand how sound waves travel. Not to mention, have joinery knowledge.
Made from high density 18mm MDF, these subwoofer boxes are expertly designed for enhanced durability and simultaneously provide great bass performance in your vehicle.
Its 36.8 Litre capacity allows you to add a 10 inch subwoofer to your vehicles original sound set up without taking up too much valuable space in your vehicle.
PLEASE NOTE: We recommend to pair this enclosure with one of our 10 inch BLAM subwoofers, such as a BL-LSP25 or BL-L25DB
Choosing a bass box can be hard as not many people sell them and ideally they need to be built by people who know subwoofer parameters, box design and understand how sound waves travel. Not to mention, have joinery knowledge.
Made from high density 18mm MDF, these subwoofer boxes are expertly designed for enhanced durability and simultaneously provide great bass performance in your vehicle.
Its 48.82 Litre capacity allows you to add a 12 inch subwoofer to your vehicles original sound set up without taking up too much valuable space in your vehicle.
PLEASE NOTE: We recommend to pair this enclosure with one of our 10 inch BLAM subwoofers, such as a BL-R12 or BL-L30DB
Choosing a bass box can be hard as not many people sell them and ideally they need to be built by people who know subwoofer parameters, box design and understand how sound waves travel. Not to mention, have joinery knowledge.
Made from high density 18mm MDF, these subwoofer boxes are expertly designed for enhanced durability and simultaneously provide great bass performance in your vehicle.
Its 8 Inch slot allows you to add an 8 inch subwoofer to your vehicles original sound set up without taking up too much valuable space in your vehicle.
PLEASE NOTE: We recommend to pair this enclosure with one of our 8 inch BLAM subwoofers, such as a BL-R8EL, BL-LSP20 or BL-L20DB
The ultra compact Pioneer TS-WX140DA amplified space saving subwoofer lets you add strong and rich bass to your sound system without taking up much space in your vehicle.
TS-WX140DA is a small active subwoofer in a sealed enclosure, delivering 170 W Maximum power and 50 W Nominal Power.
The ultra-compact casing of this subwoofer is only 280mm x 200mm x 70mm. This works well under or behind the seat of a car or truck, or behind the seats of a sports car or pickup truck,
Thanks to the inclusion of Class-D technology, Pioneer’s TS-WX140DA is even easier to install, as it is capable of taking both High (Speaker Line Input) and Low (RCA Line Input) input signals.
The Recoil SW10P is a universal all-in-one self-contained 10-inch subwoofer enclosure with a built-in 600W amplifier and 10-inch passive radiator., If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one makes this ideal for spatially challenged vehicles. The system includes a built-in amplifier meaning there is no need for an external amplifier and its adjustable gain control allows you to match it to the vehicles original system, allowing all the speakers to complement each other.
PLEASE NOTE: An installation wiring kit is included with this product, please read the long description for more information
PLEASE NOTE: An installation wiring kit is included with this product, part number 33-109
This compact 10-inch (250mm) amplified subwoofer is an all in one system, allowing you to add deep, accurate bass to your vehicles original sound set up without taking up too much valuable space. Its high quality craftsmanship and slim design mean it fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup. The system includes a built-in class-AB amplifier meaning there is no need for an external amplifier and its adjustable gain control allows you to match it to the vehicles original system, allowing all the speakers to complement each other.
PLEASE NOTE: An installation wiring kit is included with this product, part number 33-109
The SL1789 compact 8-inch (200mm) amplified subwoofer from RECOIL is an all in one system, allowing you to add deep, accurate bass to your vehicles original sound set up without taking up too much valuable space. Its high quality craftsmanship and slim design mean it fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup. With 2 x built-in passive radiators and an included remote control, the SL1789 allows you to change the amount of bass without changing the radio volume allowing the perfect mixture of bass in your music at any volume.
