Toyota

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in various Toyota Vehicles.
This head unit fitting kit includes:

- Steering control interface (29-648)

- Universal patch lead (29-025)

- Toyota Double DIN fascia brackets (50-282)

PLEASE NOTE: There is a very slight gap above the new radio after using this kit

• Toyota to DIN car aerial antenna adapter (21-147)
• Toyota USB port retention cable (24-253)
• Steering wheel control interface (29-695)
• Universal patch lead (29-025)
• Toyota Yaris (2017-2020) Single DIN fascia (50-624)

• Toyota to DIN car aerial antenna adapter (21-147)
• Toyota USB port retention cable (24-253)
• Steering wheel control interface (29-695)
• Universal patch lead (29-025)
• Toyota Yaris (2017-2020) Single DIN fascia (50-624/1)

• Toyota to DIN car aerial antenna adapter (21-147)
• Toyota USB port retention cable (24-253)
• Steering wheel control interface (29-695)
• Universal patch lead (29-025)
• Toyota Yaris (2017-2020) Double DIN fascia (50-624/1)
• 103mm double din fitting cage kit (51-012)

• Toyota to DIN car aerial antenna adapter (21-147)
• Toyota USB port retention cable (24-253)
• Steering wheel control interface (29-695)
• Universal patch lead (29-025)
• Toyota Yaris (2017-2020) Double DIN fascia (50-624)
• 103mm double din fitting cage kit (51-012)

• Car radio ISO connection harness (20-130)
• Aerial antenna adapter (21-147)
• Single DIN Piano Black fascia adapter (50-651)

• Aerial antenna adapter (21-147)
• USB retention cable (24-250)
• Steering wheel control interface and patch lead (29-707)
• Single DIN Piano Black fascia adapter (50-651)

• Car radio ISO connection harness (20-130)
• Aerial antenna adapter (21-147)
• Single DIN Anthracite fascia adapter (50-652)

• Aerial antenna adapter (21-147)
• USB retention cable (24-250)
• Steering wheel control interface and patch lead (29-707)
• Single DIN Anthracite fascia adapter (50-652)

• Citroen/Peugeot CANbus Radio ISO lead (20-161-IGN)
• Fakra to DIN antenna adapter (21-106)
• Double DIN fascia adapter trim (50-743)
• 103mm high Double DIN cage kit (51-012)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Fiat Scudo (2007-2012) and Toyota Proace (2013-2016) car and van models.

The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio.

This complete head unit fitting kit includes:

• Fakra to DIN antenna adapter (21-106)
• Steering wheel control/ parking sensor retention interface (39-PGA-PDC)
• Double DIN fascia adapter trim (50-743)
• 103mm high Double DIN cage kit (51-012)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Fiat Scudo (2007-2012) and Toyota Proace (2013-2016) car and van models.

This complete head unit fitting kit includes:

• Fakra to DIN antenna adapter (21-106)
• Steering wheel control interface (49-PGA-01)
• 49 universal patch lead (49-025)
• Double DIN fascia adapter trim (50-743)
• 103mm high Double DIN cage kit (51-012)

PLEASE NOTE: For vehicles with factory parking sensors please use FK-743-PDC

• Toyota to DIN car aerial antenna adapter (21-147)
• Toyota USB port retention cable (24-253)
• Steering wheel control interface (29-695)
• Universal patch lead (29-025)
• Toyota Yaris (2012-2017) Double DIN fascia (50-803)

Complete fitting kit to install a Single or Double DIN head unit and retain the original steering wheel controls in Toyota Auris (2013 - 2015) car models.

This head unit fitting kit includes:

• Antenna adapter cable (21-147)
• Steering wheel control interface (29-695)
• Universal patch lead for steering control interface (29-025)
• Single/Double DIN fascia adapter (50-937)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen Dispatch, Peugeot Expert and Toyota ProAce (2016 Onwards) vehicles.

Suitable for vehicles with factory Basic Radios.

This complete head unit fitting kit includes:

• Double fakra to DIN antenna adapter (21-140)
• Steering wheel control interface (49-PGA-01)
• 49 universal patch lead (49-025)
• Double DIN fascia adapter panel (50-976)

PLEASE NOTE: Only Suitable for vehicles with original factory fitted Basic radios

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls in Toyota Hilux (2016 Onwards) vehicles

• Antenna adapter cable (21-147)
• Steering wheel control interface (29-695)
• Universal patch lead for steering control interface (29-025)
• Double DIN fascia adapter panel (50-984)

The new INE-W611D navigation system is an amazing all-in-one solution with built-in iGo Primo navigation using TomTom maps, as well as a CD/DVD drive. The 6.5-inch touch-screen displays navigation maps, menus and movies clear and crisp. Enjoy DAB+ digital radio and use authorized apps in your car with Apple CarPlay and Android Auto. Take advantage of your two USB ports, allowing you to charge your phone and playback music from your USB stick at the same time.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The KD-DB922BT is a musical all-rounder in every respect. It provides crystal-clear radio reception via DAB+ or FM. Thanks to Bluetooth, music can be played back from a cell phone - hands-free function for two phones included! Thanks to the Amazon Alexa function, the digital voice assistant can now also be used conveniently via the car radio.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering.

JVC KD-X282BT (Mechless) Single DIN car stereo head unit with Bluetooth hands-free calling & music streaming, Spotify app control, iPhone music & charging and Android smartphone music playback.

Spotify app users will be delighted to know that this receivers is fully compatible for playback and music search.

PLEASE NOTE: There is no CD mechanism included in this model. However, this does allow us to reduce the depth of the product to 100mm which will fit into vehicles having less dashboard audio space than traditional products.

This JVC KW-M565DBT Short Body Double DIN stereo head unit  comes with integrated DAB+ tuner for crystal clear radio listening and Bluetooth technology for hands-free calling and wireless music streaming.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Kenwood DMX5020DABS Double DIN radio Head Unit with DAB and enhanced wired Smartphone connections (Apple Carplay/ Android Auto) 6.8" Touch screen with wired Apple CarPlay and Android Auto, Spotify Direct Control, DAB/FM/MW/LW Radio, Bluetooth hands-free calling and music streaming, iPod/iPhone music playback and USB.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Kenwood DMX-8021DABS Double DIN radio Head Unit with DAB and enhanced wireless Smartphone connections (Apple Carplay/ Android Auto)

7 inch double DIN touchscreen with DAB+ Radio, Bluetooth Android Auto and WIFI Wireless Apple CarPlay.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Kenwood DMX7722DABS Double DIN radio Head Unit with DAB+ and enhanced wireless Smartphone connections (Apple Carplay/ Android Auto)

6.8 inch Double DIN touchscreen with DAB+ Radio, Bluetooth, WIFI Wireless Apple CarPlay and Android Auto.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Kenwood DPX-7300DAB Double DIN radio Head Unit with CD/USB Receiver, Bluetooth, DAB+, Spotify & Amazon Alexa ready

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Kenwood KDC-BT460U Single DIN car stereo head unit CD/USB Receiver with Bluetooth technology for hands-free phone calls & music streaming.

Enjoy convenient control. Built-in Bluetooth technology for hands-free calls and music streaming and the ability to use your smartphone like a wireless remote control. The Digital Sound Processor, Time Alignment & 13-Band EQ ensures you of optimal sound tuning enhancements.

The Kenwood KDC-BT760DAB allows you to enjoy convenient control and crystal clear Digital Radio DAB+. Built-in Bluetooth technology for hands-free calls and music streaming gives the ability to use your smartphone like a wireless remote control and interactions with Amazon Alexa cloud-based voice service. Digital Sound Processor, Time Alignment & 13-Band EQ ensures allows you optimal sound tuning enhancements.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Kenwood KMM-BT408DAB allows you to enjoy convenient control and crystal clear Digital Radio DAB+. Built-in Bluetooth technology for hands-free calls and music streaming gives the ability to use your smartphone like a wireless remote control. Digital Sound Processor, Time Alignment & 13-Band EQ ensures allows you optimal sound tuning enhancements.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Pioneer DEH-S240BT is a single-DIN CD Player, Bluetooth, USB combined stereo, setting new standards in terms of audio performance and connectivity.

It’s very easy to use and control. Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone.

For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.

This Single DIN Bluetooth hands-free and DAB combined after market stereo is very easy to use and control. Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone.

For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

Pioneer DMH-A240BT Double DIN stereo head-unit with Bluetooth and Smartphone connectivity. Mechafree 6.2” Clear Resistive touchscreen multimedia player, with easy smartphone connectivity via a simple USB cable supporting Smartphone Mirroring, Bluetooth, 13-band GEQ, advanced audio features and premium audio quality.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The "Short Chassis" Double DIN Pioneer DMH-A340DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which allows you to mirror & control your smartphone from your dashboard in a convenient way. It plays DAB/ DAB+ Digital Radio and audio/video content from USB devices. Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Wi-Fi enabled SPH-EVO64DAB features a 6.8” touchscreen display with a hideaway control unit that installers can tuck into separate compartments of the automobile, providing vehicles with limited dash space a premium upgrade solution for drivers’ entertainment needs. This head unit features smartphone connectivity via Android Auto™ and Apple CarPlay™ (via wired or wireless connection), voice commands (Alexa built-in), as well as entertainment features such as Spotify®, Bluetooth® streaming, Wireless mirroring for Android, Hybrid Radio, FLAC fi le playback and more.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Wifi-Enabled Pioneer SPH-EVO950DAB is a 9 inch touchscreen head unit with DAB+ Digital Radio, both Android Auto and Apple CarPlay, as well as features such as Spotify, Bluetooth streaming, WebLink, FLAC file playback and more. With the ‘floating’ or ‘tablet’ style installation the SPH-EVO950DAB modular receiver can be installed into many vehicle types, thanks to its unique universal installation capabilities. 

A Single DIN radio cage is included with this head unit

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Pioneer FH-S820DAB double DIN car stereo head unit with Bluetooth and DAB

Double DIN car stereo head unit with DAB/DAB+, Bluetooth, Multi-colour illumination, USB input, Spotify and Pioneer Smart Sync app supported. Compatible with Apple and Android devices.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Pioneer MVH-S420BT sets new standards in terms of audio performance and connectivity. Nevertheless, it’s very easy to use and control thanks to its useful display and large Rotary Commander.

Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone. You can even connect two Bluetooth phones simultaneously.

For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.

The Pioneer MVH-S520DAB is a Single DIN car stereo head unit back with lots of features including DAB/DAB+, Bluetooth, multi colour illumination, USB, Spotify, Pioneer Smart Sync App and is also compatible with Apple and Android devices.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Double DIN SPH-DA250DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, Android Auto, WebLink and Waze (Via the Apple CarPlay or  Android Auto App) from your dashboard in a convenient and safe way. It plays DAB/DAB+ Digital Radio, audio/video content from USB devices.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

This Double DIN Pioneer AVH-Z5200DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, Android Auto, WebLink and Waze (Via Apple CarPlay or Android Auto) from your dashboard in a convenient and safe way. It plays DAB/DAB+ Digital Radio, audio/video content from CDs, DVDs and USB devices.

Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Pioneer AVH-Z7200 single DIN multimedia player with Carplay and 7 inch foldable display

Sony DSX-A510BD (Mechless) Single DIN car stereo head unit with DAB, Bluetooth, USB

Keep in touch on the road with Dual Bluetooth® connectivity from the DSX-A510BD. Wirelessly connect your first phone to play music, get directions and communicate with contacts. Add a second phone to make additional hands-free calls on the move.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Discover Sony's XAV-AX3250DB 7 Inch Touchscreen Double DIN head unit with CarPlay, Android Auto, DAB+ screen mirroring, DAB radio and works with compatible iPhone and Android smartphone. Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation, and leaves plenty of room for cabling and other accessories in the space behind the display.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Enjoy smooth and simple control for every journey with this Sony XAV-AX5650 head-unit (SLIM CHASSIS) with wired Carplay and Android Auto. Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation, and leaves plenty of room for cabling and other accessories in the space behind the display.

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The Sony XAV-AX8050D head unit provides a large 8.95 inch display and smartphone connectivity all in a single DIN installation.

- 8.95-inch Large Display with “Antiglare” Clear  and Fast Responsive Touchscreen

- Android Auto, Apple CarPlay and DAB+ Radio

- WebLink 2.0™ Cast

- 3-way Adjustable Display Mount for Flexible Installation

- Single DIN Rear Chassis Holds an Oversized LCD

- Rear View Camera Ready with Adjustable Parking Guide Lines

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

The MEX-N7300BD brings improved communication and illumination to any journey. Dual Bluetooth® lets you connect a second smartphone wirelessly, so you can make and receive hands-free calls from either phone. Tune into DAB+ radio for even more choice and better audio quality. The receiver picks up your DAB favourites too.

You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)

PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering 

Reverse view high level brake light camera and video monitor kit specially designed for Citroen Berlingo and Peugeot Partner vehicles (2008 Onwards) vehicle models.

The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back of the vehicle, whilst maintaining its original appearance.

This kit comes complete with a 5 inch standalone windscreen video monitor, great to use when installing an aftermarket reverse camera without having to modify the original factory fitted system.

Reverse view high level brake light camera and video monitor kit specially designed for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicle models from 2007 to 2016.

The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back of the vehicle, whilst maintaining its original appearance.

This kit comes complete with a 5 inch standalone windscreen video monitor, great to use when installing an aftermarket reverse camera without having to modify the original factory fitted system.

PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing high level brake light on the vehicle.

Reverse view high level brake light camera and video monitor kit specially designed for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicle models from 2016 onwards

The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety to the back of the vehicle, whilst maintaining its original appearance.

This kit comes complete with a 5 inch standalone windscreen video monitor, great to use when installing an aftermarket reverse camera without having to modify the original factory fitted system.

PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing high level brake light on the vehicle.

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)

- 165mm PSA Groupe speaker adapter panels (40-1703-165)

- Speaker adapter cables (41-014) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)

- 165mm PSA Groupe speaker adapter panels (40-1703-165)

- Speaker adapter cables (41-014) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)

- 165mm Toyota speaker adapter panels (40-0933-165)

- Speaker adapter cables (41-016) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)

- 165mm Toyota speaker adapter panels (40-0933-165)

- Speaker adapter cables (41-016) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your Toyota, or Subaru Impreza front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)

- 165mm Toyota, Saab, Subaru speaker adapter panels (40-0954-165)

- Speaker adapter cables (41-016) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your Toyota, or Subaru Impreza front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)

- 165mm Toyota, Saab, Subaru speaker adapter panels (40-0954-165)

- Speaker adapter cables (41-016) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)

- 165mm speaker adapter panels (40-1593-165)

- Speaker adapter cables (41-016) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a full sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.

This complete speaker fitting kit includes:

- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)

- 165mm speaker adapter panels (40-1593-165)

- Speaker adapter cables (41-016) 

- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)

- 2 x Skinz expert sound deadening sheets

- Nut bolt and washer pack (SPK-FITTING)

Please see our compatibility list for a full list of cars that can benefit from this upgrade kit

Provide a sound upgrade to your front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.

This kit allows you to fit a set of aftermarket 165mm speakers to your front or rear door panels (SPEAKERS NOT INCLUDED)  

This speaker fitting kit includes:

- 165mm PSA Groupe speaker adapter panels (40-1703-165)

- Speaker adapter cables (41-014) 

PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY

Provide a sound upgrade to your Toyota front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.

This kit allows you to fit a set of aftermarket 165mm speakers to your Toyota front or rear door panels (SPEAKERS NOT INCLUDED)  

This speaker fitting kit includes:

- 165mm Toyota speaker adapter panels (40-0933-165)

- Speaker adapter cables (41-016) 

PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY

Provide a sound upgrade to your Toyota or Subaru Impreza front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.

This kit allows you to fit a set of aftermarket 165mm speakers to your Toyota or Subaru Impreza front or rear door panels (SPEAKERS NOT INCLUDED)  

This speaker fitting kit includes:

- 165mm Toyota and Subaru speaker adapter panels (40-0954-165)

- Speaker adapter cables (41-016) 

PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY

Provide a sound upgrade to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.

This kit allows you to fit a set of aftermarket 165mm speakers to your Toyota, Citroen C1, Peugeot 108, Scion or Subaru front or rear door panels (SPEAKERS NOT INCLUDED)  

This complete speaker fitting kit includes:

- 165mm speaker adapter panels (40-1593-165)

- Speaker adapter cables (41-016) 

PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY

SOT adapter cable for 2017 onward Citroen and Peugeot cars to allow the fitting of an aftermarket handsfree bluetooth phone kit.

SOT adapter cable for 2019 onward Toyota vehicles to allow the fitting of an aftermarket handsfree Bluetooth phone kit.

Can also be used as a breakout cable for fitting an aftermarket amplifier to an original head radio.

Toyota T cable to ISO cable for all cars
Suitable for all Toyota cars with standard audio system.

Also fits various Subaru cars.

This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting hands-free car kits.

Citroen / Peugeot Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.
With flying lead to connect to +12volt ignition.

Also fits Fiat Scudo cars

Toyota Landcruser 120 and LC5 Amplifier bypass cable  to ISO. For Toyota Landcruisers with Sat Nav)
This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.

For Lexus IS 220. 250, 300, 350 & RX 300 cars.
Also for Toyota Landcruiser (08>) with P8506 touch screen sat nav.

Special relay to mute audio when reversing to allow parking tones to be heard clearly.

This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted.
This relay will use a positive reverse gear signal to mute the new head unit, so when the car is reversing the radio is silent and the parking tone interface can be heard clearly.

Drops 12V DC to 6V DC to provide a suitable power supply to a cars original parking camera.

Use with camera retention interfaces that do not have a voltage dropper built in.

PLEASE NOTE: This is not a camera interface. If you are looking to add or retain a camera please visit our car specific camera interface range

Dual 2.1 Amp USB panel mount charging socket.

Female ISO Lead harness (with Butt Connectors)

Allows you to connect bare Power and speaker wires to the Female ISO connector.

Useful for repairs and custom installs

ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes.

Suitable for almost any vehicle with a permanent 12v feed to the radio using standard ISO connections.

This is for power supply and speakers only. The cable is  to connect Toyota cars  to an after-market European car radio with ISO style connectors.

For all Toyota cars with standard audio systems (without amplifiers)

Car radio iso lead for Isuzu Trooper & D max

Connects the new radio to the cars original connector

For cars with steering controls use item 29-697

Cable to convert Citroen/ Peugeot cars  with Quadlock connector  to a European car radio with ISO connectors.
Fits Citroen C2,C3,C4,C5,C6 C8
Peugeot 207,307,407, 308,807

NEED TO CONNECT A LOOSE WIRE TO A FUSED IGNITION SUPPLY 

Audio cable to convert Citroen/ Peugeot cars  with Quadlock connector to a European car radio with ISO connectors. Includes CANbus 12v accessory ignition supply
Fits Citroen C2,C3, (05>) with RD4 radio
C4,C5,C6 C8 DS3 and DS4 cars.

Radio replacement adapter cable for Peugeot and Citroen cars 2017 onward. Use to connect an aftermarket stereo upgrade.

Cable to connect Toyota cars  ( after  1994) with OEM amplifiers  to to a aftermarket car radio using phono line output from the radio.
Check that the connector matches the one on the back of your original radio.

Cable to connect Toyota and Lexus cars  ( after  2005) with TOYOTA/PIONEER  original amplifiers  to to a aftermarket car radio using phono line output from the radio.

Check that the connector matches the one on the back of your original radio.( For steering controls use item 29-725 instead)

if the car has a JBL amplifier you will need item 23-224

Amplifier bypass cable for Toyota Landcruiser 120 with LC5 trim.
Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier which is under the front seat.

Amplifier bypass cable for Toyota Alphard and Vellfire (AH10) with OEM Theatre Sound Amplifier
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the passenger seat.

Retains front and rear speakers including tweeters, centre speaker and roof speakers. Subwoofer can be retained with a new amplifier

Amplifier bypass cable for Toyota Land Cruiser Prado 150 with OEM JBL amplified sound system.
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat.

Amplifier bypass cable for Toyota Alphard and Vellfire (AH20) with OEM amplified navigation system.
Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the front seat.

DIN to ISO aerial antenna adapter

This adapter converts the cars existing DIN aerial plug to an aftermarket ISO type used by older model Alpine, Blaukpunt, Siemens, VDO and some other European radio manufacturers.
Suitable for Ford & Japanese cars that have a DIN original style antenna cable.

Can also be used to convert any DIN cables to ISO

PLEASE NOTE: For a bulk pack of 10, please use 21-101B

Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.

The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car.

PLEASE NOTE: For a bulk pack of 10, please use 21-123B

Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.

This antenna adapter cable adapts from the original Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

 General Motors pin radio antenna cable adapter  for converting the original cable to use with aftermarket head units.
Used on cars from 1990-2006

Toyota 2009> style to male DIN car aerial antenna adapter cable.
This cable adapts from the 2009 onward style Toyota antenna connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

Fits various Toyota, Lexus and Subaru cars.

Citroen C1, Peugeot 108, Toyota Aygo (2014 onwards) to DIN car aerial antenna adapter cable
This cable adapts from the 2014 onward style Toyota antenna connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

Fits Citroen C1, Peugeot 108 and Toyota Aygo cars from 2014 onwards.

Toyota radio antenna adapter to female DIN Plugs into Toyota/Lexus original radio.

Recoil 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.

This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.

Retains OEM amplifier when replacing the radio
For cars with JBL premium sound systems
See compatibility notes

Retains steering wheel controls and OEM amplifier when replacing the radio
For cars with original JBL premium sound systems or original Pioneer amplifier.

The steering wheel control interface needs to be used with a 29-Series patch lead

Push fit 3.5mm stereo dash board socket with jack to jack for connection to car radio.
750mm cable length

USB dashboard socket to USB male 2m extension lead.

USB A male to USB MINI male cable
0.5M length

Keeps original  USB socket on Subaru BRZ, Trezia and Toyota Verso 2013.   Allows you  to maintain the cars existing AUX socket and use it with a new aftermarket head-unit.
This unit uses the cars original housing

Keeps original  USB socket on Citroen and Peugeot cars. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit.
This unit uses the cars original housing.
Works on all newer model Citroen and Peugeot cars that have an original USB socket.

Cable to retain the use of the original USB port when replacing the original head unit

Cable to retain the use of the original USB port when replacing the original head unit

Toyota 2018 onwards USB retention Harness

Allows retention of the original USB port in the car when fitting an after market radio.

Fits select Toyota and Suzuki cars built after 2018

Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.

iPhone  lightning to USB A charger and data cable

FLEXIBLE METAL JACKET

Digital Music Interface connects to the cars original CD changer port to allow you to play  music from an iPod MP3/4 player,mobile phone ,USB Flash drive, SD card or via a 3.5mm jack headphone connector. Bluetooth 4.0 . Separate 5v USB charging port.  Suits specific  Toyota and Lexus cars from 2003 - 2011.

Y-cable to allow the use of CD changer interfaces on cars with navigation or with AUX in facilities.

28 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors MFD GEN5.

Suits Toyota Land Cruiser 200 (07-09) and various Lexus models GS, LS,(07-09) , IS250 and 350 from (06-09) 

40 pin camera adapter cable to allow you to add an aftermarket rear view NTSC camera to OEM monitors on Toyota Prius/ Lexus RX models with MFD GEN5 multi-displays.

PLEASE NOTE: Only suitable for NTSC cameras

8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on Toyota/ Citroen and Peugeot cars with X-Touch/ X-Nav systems.

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

PLEASE NOTE: If adding an aftermarket camera to the original system please use part number 27-249

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota car models with 24 (9+15) Pin connector (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota (2012 Onwards) car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671 

This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems.

Allows you retain the original OEM camera on mostly Japanese Domestic Market model Toyotas with 6v rear camera.

Suitable for original head units with 4 pin camera connector.

PLEASE NOTE: European and Japanese spec cars often have different head units - if your model was sold in both markets, please check the connections before ordering

Allows you retain the original OEM camera on Toyota Aygo, Peugeot 108 and Citroen C1

Suitable for original head units with 8 pin camera connector.

PLEASE NOTE: Suitable for cameras from original fitment X-Touch and X-Nav head units

Toyota 2019 onward reverse camera retention interface allowing use of the original reverse camera with a new aftermarket head-unit.

Retains original reverse camera, includes handbrake output.

See full description for compatible cars and compatibility notes.

Add a rear parking camera to the Original screen on select Peugeot, Citroen, DS, Toyota and Opel/ Vauxhall vehicle models with a 7 or 8 inch NAC High or Low navigation Touch screen monitor.

This interface allows you to connect a reverse camera to the original factory fitted touch screen and display a rear view camera image upon putting the vehicle into reverse gear.

Please note: This interface is designed for select Peugeot, Citroen, DS, Toyota and Opel/ Vauxhall vehicle models with a 7 or 8 inch NAC Touch screen

Add a rear parking  camera to the Original screen on select Peugeot and Citroen cars with NAC high or low navigation Touch screen monitors. Adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. Has optional Front camera or DVR input.

Please note: This interface is designed for Citroen/ Peugeot vehicles with a 9 ,10 or 12 inch NAC Touch screen

For 7 or 8 Inch NAC touch Screen, please use 27-563

Adapter cable to pair an InCarTec 29-6XX  series steering wheel remote control interface

Use this patch lead on head units with resistive programming such as Chinese branded stereo like Xtrons, Eonon, Pumpkin, Joying etc. that have KEY 1 and KEY GROUND 

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Alpine stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Clarion stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket JVC stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Kenwood stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Pioneer patch lead to be used with an In Car Tec 29-6xx or 29-7xx series steering wheel control interfaces.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Adapter cable to pair an InCarTec 29-6XX or a 29-7XX series steering wheel remote control interface to an aftermarket Sony stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

ZENEC patch lead to be used with In Car Tec 29 series steering wheel controls

PHILIPS patch lead to be used with In Car Tec 29 series steering wheel controls

This patch lead gives out a fixed voltage between the tip and base of the 3.5mm jack plug. Use with self learning programable aftermarket units like Blaupunkt. Also for Kenwood, Sony units using their "CUSTOM" setting for steering control input

PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the original Toyota connectors to standard aftermarket ISO connectors.

Suitable for various Toyota car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface for Toyota RAV4 cars allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Toyota Alphard (2002 - 2008) and RAV4 (2006 - 2012) vehicle models.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Steering wheel control interface and adapter cable for various Toyota and Lexus cars made after 2012

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The cable also provides a speed pulse signal to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Citroen C1, Peugeot 108 and Toyota Aygo (2014 Onwards) car models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Audio Steering control interface for amplified Lexus and Toyota cars with TOYOTA/PIONEER original amplifiers.

The cable RCA Phono connectors to aftermarket head-unit

Cars with amplified systems require a JBL or other data signal to turn on the amplifier, you will need 23-224 with this interface.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.  

Suitable for Toyota Alphard and Vellfire AH20 (2008 - 2015) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and screen retention harness allowing use of the original steering wheel audio controls when installing a new aftermarket head-unit.

It also acts as a full pass through cable to keep the original screen working (including reverse camera) on select Toyota Prado 150 models with factory navigation screen and JBL amplifier system.

PLEASE NOTE: Please use with our amplifier bypass cable, part number 20-322 for speaker ISO connection

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.  

Suitable for Toyota models built after 2019

Pioneer patch lead for 29-CT series steering controls
Suitable for Pioneer head-units that are steering wheel remote ready.

Can only be used with our 29-CT series steering wheel controls

Universal patch lead for 29-CT series steering controls
Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese head-units that are steering wheel remote ready.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for various Toyota models from 2014-2019

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for Toyota RAV4 (2019 Onwards) with amplified sound systems

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Citroen and Peugeot cars with Quadlock connectors behind the radio.
This interface will also allow the steering wheel controls to access the display screen menu.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

Patch lead for the UNICAN range of steering control interfaces for resistive programming head units and head units with loose wire learning SWC input.

To be used with non-branded and Chinese head units. Also for use with other brands of head units that have loose wires for steering control input with the feature to "learn" the steering controls.

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Alpine specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit.
For JVC and Clarion car radios

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Specific patch cable to connect a Unican interface to the SWC socket on the back of the head-unit.
For Kenwood and JVC car radios with either a single wire connection.

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Specific patch cable to connect a Unican interface to the  SWC socket on the back of the head-unit.
For Pioneer / Sony car radios with either a mini Din plug or a single wire connection.

PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own 

Complete (20mm2) 4 Gauge Amplifier Installation Kit

Kit contains

- 5 m power cable transparent-red

- 1 m power cable transparent-blue

- 5 m twisted RCA cable goldplated with remote

- 1 Mini ANL fuse holder

- 1 fuse 60 A

- 4 terminals

Amplifier wiring kit 10mm2  (8 Guage)

- 5 m power cable ECO red-transparent

- 1 m power cable ECO blue-transparent

- 5 m double shielded cinch cable with remote

- 1 ANL fuse holder gold-plated

- 1 fuse 40 A

- 2 eyelets 10 mm2, d = 8.5 mm

- 2 forks 10 mm2, d = 4 , 3 mm

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.

It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.

A pair of front car speaker adapter panels for 165mm speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Toyota Landcruiser cars. Please see long description for compatibility and fitment details.

A pair of front door car speaker adapter panels for 165mm speakers. 

These panels allow you to add quality aftermarket speakers to the vehicle.

Fits Fiat Scudo (2007-2016) and Toyota ProAce (2013-2016) vehicle models. Please see long description for compatibility and fitment details.

PLEASE NOTE: Only suitable for vehicles without factory fitted speakers

A pair of front or rear door car speaker adapter panels for 165mm speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Toyota  vehicle models. Please see long description for compatibility and fitment details.

A pair of front or rear door car speaker adapter panels for 165mm speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Toyota car models. Please see long description for compatibility and fitment details.

A pair of front door car speaker adapter panels for 165mm speakers. 

These panels allow you replace the cars original 6x9 speakers with new improved quality 165mm aftermarket speakers.

The adapter plates mount in the front doors.

Fits various Toyota car models. Please see long description for compatibility and fitment details.

A pair of front or rear door car speaker adapter panels for 165mm speakers. 

These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Toyota and Isuzu vehicle models. Please see long description for compatibility and fitment details.

A pair of front door car speaker adapter panels for 165mm speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Toyota, Citroen and Peugeot vehicle models. Please see long description for compatibility and fitment details.

A pair of front door car speaker adapter panels for 165mm speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Citroen, Peugeot and Toyota car models.

A pair of front door car speaker adapter panels for 6X9 inch speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Lexus and Toyota vehicle models. Please see long description for compatibility and fitment details.

A pair of front or rear door car speaker adapter panels for 165mm speakers. 

These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits Toyota Corolla E11 and E110 1995-2002 vehicle models. Please see long description for compatibility and fitment details.

A pair of front door car speaker adapter panels for 130mm speakers. 

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.

Fits various Toyota vehicle models. Please see long description for compatibility and fitment details.

A pair of Speaker adapter cables used to connect after market speakers to the original loom on various Scion, Subaru and Toyota vehicle models.

Please see long description for compatibility

A pair of Speaker adapter cables used to connect after market speakers to the original loom on Citroen C1 and Peugeot 107, 108 vehicle models.

Please see long description for compatibility

Speaker adapter cables; used to connect after market speakers to the original loom on various Toyota and Suzuki models.

Fits models built after 2019. See long description

Speaker adapter cables; used to connect after market speakers to the original loom on various Hyundai and Kia models.

Fits models built after 1998 See long description

Speaker adapter cables; used to connect after market speakers to the original loom on various Toyota and Lexus models.

Fits models built before 2002. See long description

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Alpine stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Clarion stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket JVC stereo with a single wire steering control input.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Kenwood stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Sony stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
NOT COMPATIBLE WITH CHINESE 2WIRE SWC HEAD-UNITS  use 49-000 for these

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

CANbus steering wheel control interface for Citroen and Peugeot cars with Quadlock connectors behind the radio.
This interface will also allow the steering wheel controls to access the display screen menu.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo. It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.

Universal pocket to enable you to fit a single DIN radio into a double DIN kit

This pocket is suitable for fascia kits with side ifixng brackets

COLOUR: MATT BLACK

This trim set allows the fitting of a new radio from original to a single din aftermarket version. 

Suitable for various PSA Group car and van models.

This trim kit includes 2mm, 4mm and 10mm trim spacers to allow the new radio to be brought forward flush with the cars dash.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Toyota Camry, Celica and Supra car models.

COLOUR: MATT BLACK

Fits Toyota Celica (1999 - 2006), MR2 (2000 - 2006) and RAV4 2nd gen XA20 (2000 - 2005) car models

COLOUR: MATT BLACK

Fits Toyota Corolla (2003-2008) car models

COLOUR: MATT BLACK

Car radio fascia adapter panel to allow the fitting of an aftermarket Single or Double DIN car stereo upgrade.

A removable pocket is included for Double DIN installation

Fits Toyota Yaris (1999-2003) car models (WITH ORIGINAL TAPE PLAYERS)

COLOUR: ANTHRACITE

PLEASE NOTE: For double din installation the central bar of the fascia needs to be cut out

Toyota pocket to use with original radio brackets. Enables you to replace the original radio with a single DIN aftermarket version.

Remove the original brackets from the cars OEM radio, Fix these brackets on to the new car radio and the pocket.

Fits various Toyota car models

COLOUR: MATT BLACK

PLEASE NOTE: If the OEM brackets can't be used you may need replacement side fix brackets, product code 50-282

Fits Toyota Prius (2004-2009) car models

COLOUR: MATT BLACK

PLEASE NOTE: The pocket is removable allowing you to use the two side bars only when fitting a Double DIN

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version
Fits Toyota Aygo (2005-2014) car models

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version

Fits Toyota Hilux (2005-2010) car models

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version

Fits Toyota - RAV4 3rd Gen XA30 (2006 - 2012) car models

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

PLEASE NOTE: For double din installation the central bar of the fascia needs to be cut out.

Car radio fascia adaptor panel to allow the fitting of an aftermarket double din car radio upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. this replaces the need for a fitting cage and gives a flush professional appearance to the installation.

Suitable for fitting Toyota Hilux car models

Toyota car radio fascia adapter panel to allow the fitting of an aftermarket double DIN car stereo upgrade.

This fascia is a matt black side fixing bracket adapter.

Suitable for fitting various Toyota cars.

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version

Fits Toyota Yaris (2003-2006) car models (WITH ORIGINAL CD PLAYER RADIO)

A removable pocket is included for Single DIN installation.

COLOUR: DARK GREY

PLEASE NOTE: For double din installation the central bar of the fascia needs to be cut out

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
Fits Toyota Auris (2007-2012) car models

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
Fits Toyota Corolla Verso (2004-2009) car models

A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
Fits Toyota Corolla Verso (2004-2009) car models

A removable pocket is included for Single DIN installation.

COLOUR: SHINY SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version
Fits Toyota Prius (2010 Onwards) car models

FOR RIGHT HAND DRIVE CAR MODELS

COLOUR: MATT BLACK

PLEASE NOTE: Toyota side brackets code (50-282) are also needed to complete the installation. You will also need to reuse the original fitting brackets on the original radio

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses side fixing brackets so that no radio cage is needed.

Fits Toyota Aygo X (2022 onward)

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version.

Fits Toyota Yaris/ Vitz car models (2020 onwards) Toyota GR Yaris (2020 onwards) and Mazda 2 Hybrid (2022 onwards)

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia uses the original radios mounting brackets along with 50-282 Toyota side bars (sold separately), no cage is needed.

Fits Toyota Estima (2016-2019) 

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia uses the original radios mounting brackets along with 50-282 Toyota side bars (sold seperatey), no cage is needed.

Fits Toyota Landcruiser 150 and Prado 2009-2013 with original satellite-navigation or small screen above radio.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia uses the original radios mounting brackets along with 50-282 Toyota side bars (sold separately), no cage is needed.

Fits Toyota Landcruiser 150 and Prado 2013 - 2017

COLOUR: BLACK and SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia uses the original radio brackets so no radio cage is required. Use with 50-282 Toyota side fixing bars,

Fits Toyota Hilux 2016 onwards (RHD only) vehicle models.

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

The fascia is flush fit, making it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish

This fascia uses the original radios mounting brackets along with the 50-282 Toyota side bars supplied with this fascia, no cage is needed.

Fits Toyota Alphard AH10 2002-2008 (Hybrid models with the larger OEM Navigation system)

COLOUR: SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is supplied with a fitting cage so no additional fitting cage is required.

Fits Toyota Yaris/ Vitz car models 2017-2020 (where the original radio is integrated into the fascia that surrounds the hazard switch, seatbelt and airbag lights)

COLOUR: SILVER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is supplied with a fitting cage so no additional fitting cage is required.

Fits Toyota Yaris/ Vitz car models 2017-2020 (where the original radio is integrated into the fascia that surrounds the hazard switch, seatbelt and airbag lights)

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Toyota Urban Cruiser (2009-2014) Toyota iST (2007-2016) and Scion XD (2007-2014) car models 

COLOUR: SILVER

Car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN car radio upgrade for a Toyota Verso (2009 - 2011)

The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

Fits Citroen C1, Peugeot 108 and Toyota Aygo (2014-2022) car models.

COLOUR: PIANO BLACK

PLEASE NOTE: This fitting kit fits Double DIN head units with a maximum depth of 80mm

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Suitable for Citroen C1, Peugeot 108 and Toyota Aygo (2014-2022) car models.

COLOUR: PIANO BLACK

PLEASE NOTE: Only suitable for 1-DIN radios with a maximum installation depth of 100mm / 150mm including plug

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Suitable for Citroen C1, Peugeot 108 and Toyota Aygo (2014-2022) car models.

COLOUR: ANTHRACITE

PLEASE NOTE: Only suitable for 1-DIN radios with a maximum installation depth of 100mm / 150mm including plug

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Toyota Prius (2016 Onwards) car models 

COLOUR: GLOSS BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. this replaces the need for a fitting cage and gives a flush professional appearance to the installation.

Fits Toyota Prius Plus (2013 Onwards) car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fits Toyota Estima/ Previa (2006 onwards) car models 

COLOUR: SILVER/ GREY

NEEDS item 50-282 to be fitted to new radio as gap is too wide at 202mm x 102mm

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Contains a fixed pocket.

Fits Toyota Alphard (2008-2014) car models 

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

Fascia gap size: 202mm x 102mm

This fascia is designed to fit Toyota Alphard (2015 Onwards) vehicle models

COLOUR: GLOSS BLACK 

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

Fits Toyota Auris (E150) (2007-2013) Toyota Corolla Seca (2007-2013) and Toyota Blade (2007-2012) car models

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket version

172mm x 98mm

Fits Toyota LandCruiser 100 (2002-2006) car models (FOR MODELS WITHOUT OEM NAVIGATION)

COLOUR: SILVER

PLEASE NOTE: Some branded and other unbranded CHINESE Head Units vary in size and will not fit. Please check the dimensions of your Head Unit and compare to our flush fit dimensions (172mm x 98mm)

This fascia requires the use of the original brackets from the old radio in order to be fitted.
Fits Lexus GX-470 (2003-2009) and Toyota Landcruiser Prado J120 (2003-2009) car models (WITHOUT FACTORY NAVIGATION)

COLOUR: MATT BLACK)

Replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket version

172mm x 98mm

This is a side fit fascia and does not require a fitting cage

Fits Toyota Avensis (2009-2015) car models
COLOUR: BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a double din aftermarket version

172mm x 98mm. 

This fascia can be installed by reusing the original fixings for the radio

Fits Toyota Yaris (2006-2011) car models
COLOUR: SILVER

173mm x 98mm

Fits Toyota Yaris/ Vitz car models (RIGHT HAND DRIVE)

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket version
Includes cage kit so the aftermarket cage supplied with the new radio will not be needed.

Fits Subaru Justy (2007-2009), car models (WITH ORIGINAL OEM NAVIGATION RADIOS)

COLOUR: MATT BLACK

PLEASE NOTE: IF THE CAR DOES NOT HAVE THE ORIGINAL NAVIGATION THEN YOU WILL NEED A REPLACEMENT OEM PANEL FROM A SUBARU DEALER

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.

This fascia is supplied with a fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.

COLOUR: MATT BLACK

PLEASE NOTE: For cars with standard original radio's use item 50-282

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version

This fascia is supplied with a fitting cage so no additional fitting cage is required. The fascia adapter will give a flush mount and professional appearance to the installation.

Fits Toyota Auris (2007 - 2012), Avensis (2003 - 2008), Verso (2009 Onwards) and Yaris (2006 - 2011) car models WITH OEM FACTORY FITTED NAVIGATION SYSTEMS

COLOUR: MATT BLACK

PLEASE NOTE: For cars with standard original radio's use item 50-282

Car radio fascia adapter panel to allow the fitting of an aftermarket Single or Double din car radio upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

A pocket is also provided for single DIN installation.

The fascia is designed to Toyota Auris (2015 - 2019) car models

COLOUR: PIANO BLACK

Car radio fascia adapter panel to allow the fitting of an aftermarket Single or Double din car radio upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

A pocket is also provided for single DIN installation.

The fascia is designed to Toyota Auris (2013 - 2015) car models

COLOUR: PIANO BLACK

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

The fascia is designed to fit Toyota Hilux facelift (2012-2015) car models

COLOUR: MATT BLACK

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version.

This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel

Suitable for Citroen Dispatch, Peugeot Expert, Toyota ProAce (2016 Onwards) vehicles.

Also suitable for Vauxhall Vivaro (2019 Onwards) vehicle models

COLOUR: MATT BLACK

Car audio metal cage kit and trim 103mm high.
Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.

SONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)
Needed with some Sony radios that do not fit the normal 113mm cages supplied with aftermarket head-units.

Interior windscreen glass mount DAB radio antenna aerial suitable for aftermarket DAB car radios.

Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.

PLEASE NOTE: For a bulk pack of 5, please use 70-923B

DIN to DAB & FM antenna aerial amplifier splitter/ radio distributor.

This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas

For a bulk pack of 5, please use 70-928B

DIN to DAB & FM antenna aerial amplifier splitter interface.

This interface amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.

PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas

For a bulk pack of 5, please use 70-965B

Panel clips normally found on the back of original car audio facias.
10 pcs per pack

For various uses.
Black 100 pcs
100mm long x 2.5mm wide

For various uses.
Black 100 pcs
200mm long x 2.5mm wide

For various uses.
Black 100 pcs
300mm long x 4.8mm wide

For various uses.
Black 100 pcs
370mm long x 4.8mm wide

M5 x 60mm  male threaded bolts  for use as extra long radio support bolts. 
These bolt screw into the back of the standard Din or Double Din radio. They then help support the new radio by locating into the OEM support slot in the car
10 pcs per pack

Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.

Momentary panel mount rocker switch. Push and hold to activate the switch, springs back to original position on release. 19mm hole diameter.

ON/OFF panel mount toggle rocker switch. 19mm hole diameter.

100m roll of Automotive spec speaker cable.
2 x 24/02 copper Figure 8 speaker cable
Black , Black Red

100m roll of automotive spec thinwall cable.
24/02 copper  BLACK
0.75mm2 , 14 amp

100m roll of automotive spec thinwall cable.
24/02 copper  BLUE
0.75mm2 , 14 amp

100m roll of automotive spec thinwall cable.
24/02 copper  Red
0.75mm2 , 14 amp

100m roll of automotive spec thinwall cable.
24/02 copper  YELLOW
0.75mm2 , 14 amp

50m roll of automotive specification thinwall cable.
28/03 copper  BLACK
2.00 mm2 , 25 amp

50m roll of automotive spec thinwall cable.
28/03 copper  Red
2.0mm2 , 25 amp

Ideal for -12V GROUND cable on active under-seat sub-woofer boxes

30m roll of automotive spec thinwall cable.
44/03 copper  BLACK
3.0mm2 , 40 amp

Ideal for -12V GROUND cable on active under-seat sub-woofer boxes

30m roll of automotive spec thinwall cable.
44/03 copper  RED
3.0mm2 , 40 amp

30m roll of automotive spec thinwall cable.
56/03 copper  BLACK
4.0mm2 , 40 amp

30m roll of automotive spec thinwall cable.
56/03 copper  Red
4.0mm2 , 40 amp

30m roll of automotive spec thinwall cable.
84/03 copper  BLACK
6.0mm2 , 50 amp

30m roll of automotive spec thinwall cable.
84/03 copper  Red
6.0mm2 , 50 amp

In-Line standard (ATO, ATC, APR) blade fuse holder.
Black   10pcs
(picture shows 2 pcs clipped together)

In-Line standard (ATO, ATC, APR) blade fuse holder.
Black     100pcs
(picture shows 2pcs clipped together)

5 Pin Relay Holder (12v 80amp)

Terminates in bare wires, approximately 300mm in length and 12awg.

High-quality Mini ANL and ATC Fuse holder for 20mm ² cable.

Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.

The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.

The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation. 

Bulk pack of 5 High-quality Mini ANL and ATC Fuse holders for 20mm ² cable.

Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.

The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.

The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation. 

Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.

The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.

The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation. 

Bulk pack of 5 high-quality Dual ATC Fuse holders for 10mm ² cable.

Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.

The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.

The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation. 

Mini ANL fuses 40 Amp

Pack of 2

These are compatible with our Mini ANL fuse holder (33-002)

Mini ANL fuses 60 Amp

Pack of 2

These are compatible with our Mini ANL fuse holder (33-002)

Mini ANL fuses 80 Amp

Pack of 2

These are compatible with our Mini ANL fuse holder (33-002)

Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves

These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.

Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves

These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.

Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves

These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.

Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves

These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.

Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves

These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.