; Add a Camera to vehicles original system/screen (Adding) - InCarTec
Sort by: Code (ascending), Code (descending), Price (lowest first) - active, Price (highest first), Newest first

Add a Camera to vehicles original system/screen (Adding)

CAMERA INTEGRATION

Interfaces for adding front and rear camera's to cars OEM system

Unfortunately, there were no matches for . Please try a new search.

Add Camera to OEM screen (FAKRA) for Mercedes

Add Camera to OEM screen (FAKRA) for Mercedes

Allows you to add an aftermarket camera to the OEM screen on a Mercedes factory fitted head unit.

PLEASE NOTE: This cable is only compatible with single fakra connections. Double fakra connections are not supported. NTSC only

You will need to code the head unit for camera input.

Stock code: 27-240
Price: £3.00 (£3.60 inc VAT)
Add Camera to VW group cars OEM screen with MIB2  MEDIA audio systems

Add Camera to VW group cars OEM screen with MIB2 MEDIA audio systems

This is a simple cable with two MQS terminal receptacles that can be pinned into the back of the mini blue part of the  Quadlock connector. Allows you to add a Camera to the screen on cars with Composition media  and Discovery Media  head-units.
Stock code: 27-243
Price: £3.00 (£3.60 inc VAT)
Reverse camera power feed relay cable

Reverse camera power feed relay cable

This power relay cable is to be used when installing a camera into a vehicle.

Sometimes a reverse power feed from a reverse light may not be strong enough to power a camera or may create interference.

This relay can use a weak reverse trigger to switch on a better 12v power feed for a camera or reduce interference.

Requires hardwiring.

Stock code: 10-641
Price: £4.00 (£4.80 inc VAT)
5 metre Single male to male Phono/RCA video extension cable

5 metre Single male to male Phono/RCA video extension cable

5 metre Single male to male Phono/RCA video extension cable

Cable colour: Black

Connection: 2 x male Phono plug

Length: 5 metres

Stock code: 32-121
Price: £4.00 (£4.80 inc VAT)
Add a camera to Iveco Daily with original IVEConnect media head unit

Add a camera to Iveco Daily with original IVEConnect media head unit

Add an aftermarket reverse camera to the original media head unit.

Reverse camera adapter lead for Iveco Daily vans fitted with original IVEConnect media head units. 

Stock code: 27-257
Price: £5.00 (£6.00 inc VAT)
Suzuki reverse camera input adapter

Suzuki reverse camera input adapter

Reverse camera adapter lead for Suzuki cars. Add an aftermarket reverse camera to a Suzuki car with original navigation head units.


Stock code: 27-244
Price: £6.00 (£7.20 inc VAT)
Clarion CCA644 camera input adapter

Clarion CCA644 camera input adapter

Reverse camera adapter lead for Clarion NX504E, NX503E and FX503E head units.


Stock code: 27-244
Price: £6.00 (£7.20 inc VAT)
10 metre Single male to male Phono/RCA video extension cable

10 metre Single male to male Phono/RCA video extension cable

10 metre Single male to male Phono/RCA video extension cable

Cable colour: Black

Connection: 2 x male Phono plug

Length: 10 metres

Stock code: 32-122
Price: £7.00 (£8.40 inc VAT)
Add Camera to Mazda  OEM  screen (4pin connector)

Add Camera to Mazda OEM screen (4pin connector)

Enables addition of an aftermarket NTSC reversing camera to the original Mazda screen. 

Stock code: 27-237
Price: £8.00 (£9.60 inc VAT)
Add aftermarket/ retain original camera on select Mazda car models (4 Pin connector)

Add aftermarket/ retain original camera on select Mazda car models (4 Pin connector)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Mazda car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Stock code: 27-247
Price: £8.00 (£9.60 inc VAT)
Mitsubishi camera retention/add on harness adapter (8pin)

Mitsubishi camera retention/add on harness adapter (8pin)

Adapter harness to add an aftermarket camera to the original head unit. Also can use toretain the use of the original reverse camera when fitting an aftermarket head unit but MUST BE USED WITH 12v to 6V adapter 10-671


Stock code: 27-248
Price: £8.00 (£9.60 inc VAT)
15 metre Single male to male Phono/RCA video extension cable

15 metre Single male to male Phono/RCA video extension cable

15 metre Single male to male Phono/RCA video extension cable

Cable colour: Black

Connection: 2 x male Phono plug

Length: 15 metres

Stock code: 32-123
Price: £10.00 (£12.00 inc VAT)
Add a Camera to Honda Civic, CR-V, Jazz (2017 Onwards) with 5 inch Screen radios (32 Pin Connector)

Add a Camera to Honda Civic, CR-V, Jazz (2017 Onwards) with 5 inch Screen radios (32 Pin Connector)

This camera cable allows you to add an aftermarket rear view camera to the 5 inch factory radio screen on select Honda Civic, CR-V and Jazz models (2016 Onwards) car models. 

The 32 Pin connector on this cable connects to the back of the factory Honda radio which upon reverse gear will display a rear camera image on the 5 inch screen.

Only suitable for Honda Civic (S/SE Models) CR-V (S-Models) and Jazz (S-Models) from 2017 Onwards.

PLEASE SEE PRODUCT IMAGES FOR COMPATIBLE RADIOS

Stock code: 27-263
Price: £11.00 (£13.20 inc VAT)
Retain original factory camera on select Toyota, Scion and Subaru cars (16 PIN CONNECTOR)

Retain original factory camera on select Toyota, Scion and Subaru cars (16 PIN CONNECTOR)

Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

PLEASE NOTE: If adding an aftermarket camera to the original system please use part number 27-249

Stock code: 27-249-RET
Price: £12.00 (£14.40 inc VAT)
Add Camera to Honda CRV original navigation screen 7PIN green

Add Camera to Honda CRV original navigation screen 7PIN green

This cable will allow you to add an aftermarket camera to OEM Honda navigation systems which have a green 7 PIN connection on the back of the head unit .

Suits Honda 2VNO  navigation units (with green 7 PIN connection)

Stock code: 27-230
Price: £13.00 (£15.60 inc VAT)
Add camera to Honda CRV  navigation 2VN3 or 08A40-2M6-401 (7pin Grey connector)

Add camera to Honda CRV navigation 2VN3 or 08A40-2M6-401 (7pin Grey connector)

Fits Honda models before 2012 with original navigation model 2VN3 and 08A40-3M6-401 type 9953485

Enables you to connect an aftermarket back up camera to the original OEM screen.

Stock code: 27-233
Price: £13.00 (£15.60 inc VAT)
Add aftermarket camera to Nissan (2015 Onwards) cars (With 4.3 inch factory colour display)

Add aftermarket camera to Nissan (2015 Onwards) cars (With 4.3 inch factory colour display)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Nissan (2015 Onwards) cars with a 4.3 inch factory colour display and 32 PIN connection behind the screen.

PLEASE NOTE: Not suitable for Nissan car models with 360 degree Birds Eye view camera systems

Stock code: 27-256
Price: £13.00 (£15.60 inc VAT)
Retain original camera on Subaru cars (6.2 INCH BASIC SCREEN MODELS)

Retain original camera on Subaru cars (6.2 INCH BASIC SCREEN MODELS)

This adapter cable allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit. 

Suitable on select Subaru (2015 Onwards) car models with original 6.2 inch basic screen. 

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Stock code: 27-255
Price: £14.00 (£16.80 inc VAT)
Add camera to a Renault/ Dacia (WITH 24 PIN MEDIA NAVIGATION SCREEN)

Add camera to a Renault/ Dacia (WITH 24 PIN MEDIA NAVIGATION SCREEN)

Adapter  to add a reverse view camera to various Renault and Dacia vehicles with MEDIA Nav screen head units.

NOT Suitable for R Link 1 and R Link 2 systems

The camera input may need to be activated by a dealer.

Stock code: 27-258
Price: £14.00 (£16.80 inc VAT)
Add camera to OEM Subaru Monitor with  8 pin connector

Add camera to OEM Subaru Monitor with 8 pin connector

8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on various Subaru models from 2008-2015.

Fits cars with original Kenwood navigation  or car with the 4.3" screen and navigation

Stock code: 27-223
Price: £15.00 (£18.00 inc VAT)
Add aftermarket/ retain original camera on select Toyota, Scion and Subaru cars (16 PIN CONNECTOR)

Add aftermarket/ retain original camera on select Toyota, Scion and Subaru cars (16 PIN CONNECTOR)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Stock code: 27-249
Price: £15.00 (£18.00 inc VAT)
Add aftermarket/ retain original camera on Hyundai /Kia cars (OEM NAVIGATION and 24 Pin Connector)

Add aftermarket/ retain original camera on Hyundai /Kia cars (OEM NAVIGATION and 24 Pin Connector)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars with a factory fitted navigation system.

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Stock code: 27-253
Price: £15.00 (£18.00 inc VAT)
Add aftermarket/ retain original camera on Hyundai /Kia cars (WITHOUT FACTORY NAVIGATION)

Add aftermarket/ retain original camera on Hyundai /Kia cars (WITHOUT FACTORY NAVIGATION)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Hyundai and Kia cars without factory fitted navigation systems.

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Stock code: 27-254
Price: £15.00 (£18.00 inc VAT)
Add camera to OEM Toyota Land Cruiser Lexus models 28 pin connector

Add camera to OEM Toyota Land Cruiser Lexus models 28 pin connector

28 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors MFD GEN5.

Suits Toyota Land Cruiser 200 (07-09) and various Lexus models GS, LS,(07-09) , IS250 and 350 from (06-09) 

Stock code: 27-224
Price: £16.00 (£19.20 inc VAT)
Add camera to OEM Toyota Prius/ Lexus RX MFD GEN5 multi-display 40 pin connector

Add camera to OEM Toyota Prius/ Lexus RX MFD GEN5 multi-display 40 pin connector

40 pin camera adapter cable to allow you to add an aftermarket rear view NTSC camera to OEM monitors on Toyota Prius/ Lexus RX models with MFD GEN5 multi-displays.

PLEASE NOTE: Only suitable for NTSC cameras

Stock code: 27-225
Price: £16.00 (£19.20 inc VAT)
Add camera to OEM Aygo/ Citroen C1/ Peugeot 108 with X-Touch/ X-Nav monitor 8 pin connector

Add camera to OEM Aygo/ Citroen C1/ Peugeot 108 with X-Touch/ X-Nav monitor 8 pin connector

8 pin camera adapter cable to allow you to add an aftermarket rear view camera to OEM monitors on Toyota/ Citroen and Peugeot cars with X-Touch/ X-Nav systems.

Stock code: 27-226
Price: £16.00 (£19.20 inc VAT)
Add camera to Ford OEM Sync 1 with 4.2" Colour Screen (CODING REQUIRED)

Add camera to Ford OEM Sync 1 with 4.2" Colour Screen (CODING REQUIRED)

Reverse Camera input adaptor for Ford SYNC 1 Systems with a 4.2" colour screen. Vehicle Coding required

Enables connection of a aftermarket backup camera to the original OEM SYNC system. 

Stock code: 27-235
Price: £17.00 (£20.40 inc VAT)
Add aftermarket/ retain original camera on select Toyota vehicles (24 (9+15) Pin connector)

Add aftermarket/ retain original camera on select Toyota vehicles (24 (9+15) Pin connector)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota car models with 24 (9+15) Pin connector (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

Stock code: 27-250
Price: £17.00 (£20.40 inc VAT)
Add camera to OEM Nissan with Nissan Audio (no NAV) 32 pin connector

Add camera to OEM Nissan with Nissan Audio (no NAV) 32 pin connector

This 32 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Nissan models with Nissan Audio multimedia systems (WITHOUT NAVIGATION)

Stock code: 27-228
Price: £18.00 (£21.60 inc VAT)
Add aftermarket/ retain original camera on select Toyota (2012 Onwards) vehicles (24 Pin connector)

Add aftermarket/ retain original camera on select Toyota (2012 Onwards) vehicles (24 Pin connector)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota (2012 Onwards) car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671 

Stock code: 27-251
Price: £18.00 (£21.60 inc VAT)
Add camera to Ford OEM Sync 2.5 (32 Pin connection) (CODING REQUIRED)

Add camera to Ford OEM Sync 2.5 (32 Pin connection) (CODING REQUIRED)

Reverse Camera interface adaptor for factory Ford SYNC 2.5 / SYNC 3 systems (version 3.0 / 3.2 / 3.3) with 7 or 8 inch monitor screen and new 32-PIN Ford connector

This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings.

Disconnect the factory connector and connect our T-Harness inline.

PLEASE NOTE: Coding is required with Forscan to enable RVC function on Sync systems

Stock code: 27-319
Price: £18.00 (£21.60 inc VAT)
Add Camera to Toyota Touch 2  (28pin connector)

Add Camera to Toyota Touch 2 (28pin connector)

This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems.

Stock code: 27-260
Price: £20.00 (£24.00 inc VAT)
Add a reverse Camera to Mazda (2014 Onwards) car models with MZD Connect Screen (28pin)

Add a reverse Camera to Mazda (2014 Onwards) car models with MZD Connect Screen (28pin)

Camera interface cable allowing you to add a reverse Camera to select Mazda (2014 Onwards) car models with factory fit 7 inch MZD Connect Screen based systems.

This cable allows you to add an aftermarket back-up NTSC  camera to the Mazda MZD connect original screen

Suitable for various Mazda cars 2014 onwards with original 7" MZD Connect monitor and 28 pin connector.

PLEASE NOTE: Additional programming may be required to activate the rear view camera option on some vehicles

Stock code: 27-261
Price: £21.00 (£25.20 inc VAT)
Add camera to OEM Nissan Leaf with EV GEN1 and EV GEN2 40 pin connector

Add camera to OEM Nissan Leaf with EV GEN1 and EV GEN2 40 pin connector

40 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Nissan Leaf cars with OEM Nissan EV GEN1 and EV GEN2 multimedia systems.

Stock code: 27-227
Price: £24.00 (£28.80 inc VAT)
Add camera to Ford OEM Sync 2 and 3 systems (CODING REQUIRED)

Add camera to Ford OEM Sync 2 and 3 systems (CODING REQUIRED)

Reverse Camera input adaptor for Ford Sync 2 8 inch & Sync 3 Systems. Vehicle Coding required

Enables connection of a aftermarket backup camera to the original OEM system. 

Stock code: 27-317
Price: £24.00 (£28.80 inc VAT)
Add camera to Honda  OEM 8" screens (24pin)

Add camera to Honda OEM 8" screens (24pin)

24 pin OEM camera adapter cable to allow you to add an aftermarket rear view camera to Honda cars with OEM Honda i-MID 8"  and touch screen Monitors. 

Stock code: 27-234
Price: £25.00 (£30.00 inc VAT)
Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Grey Connectors)

Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Grey Connectors)

Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Grey Connectors)

Conversion Kit for campers/ campervans which have the dometic video cable pre-installed from factory but wish to use a Pioneer camera and/or head unit.

Compatible with the dometic shadow grey connectors.

Pioneer Part Number: CA-BC-WAE.002

Stock code: 27-119
Price: £41.65 (£49.98 inc VAT)
Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Blue Connectors)

Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Blue Connectors)

Pioneer Dometic conversion kit cable for Camper/ Campervan conversions (Blue Connectors)

Conversion Kit for campers/ campervans which have the dometic video cable pre-installed from factory but wish to use a Pioneer camera and/or head unit.

Compatible with the dometic water blue connectors.

Pioneer Part Number: CA-BC-WAE.001

Stock code: 27-220
Price: £41.65 (£49.98 inc VAT)
Volkswagen reverse camera input interface harness

Volkswagen reverse camera input interface harness

Adapter harness to add a reverse camera to an original Volkswagen radio screen.
This harness has a built in interface to give ignition power and a reverse feed to the camera.
Note, camera input function needs to be CODED to the car by a VW dealer or a specialist engineer with VCDS.


Stock code: 27-300
Price: £63.00 (£75.60 inc VAT)
40pin camera cable for Renault and Nissan with EasyLink all-in-one 8inch head-unit (coding needed)

40pin camera cable for Renault and Nissan with EasyLink all-in-one 8inch head-unit (coding needed)

Plug and Play cable  to add an NTSC  reverse view camera to Renault and Nissan vehicles with EasyLink 8" head-units

Nissan Primastar 08/21 on , Renault Express Van, Kangoo, Master, Trafic Rapid 05/2021 onwards.

The camera input coding will need to be activated by a dealer if not already enabled at factory.

Stock code: 27-278
Price: £79.00 (£94.80 inc VAT)
Volkswagen RCD510 RNS315 RNS510  rear view camera interface

Volkswagen RCD510 RNS315 RNS510 rear view camera interface

Reverse camera to RGB video input interface for VW cars with RNS315, RNS510 or RCD510 original head units.

Only for NTSC camera's. CODING NEEDED BY VW ENGINEER WITH DIAGNOSTIC TOOL

Stock code: 27-292
Price: £85.00 (£102.00 inc VAT)
Add a camera to Lexus with GEN7/GEN8/GEN9 Media-Navigation System (59-pin and 16-pin)

Add a camera to Lexus with GEN7/GEN8/GEN9 Media-Navigation System (59-pin and 16-pin)

This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.

PLEASE NOTE: Only suitable for 59 pin and 16 pin connection

ES series cars of 2012-2018 MY are not supported!

Stock code: 27-265
Price: £101.00 (£121.20 inc VAT)
Landrover Jaguar  rear view camera input cable  late 2016  on

Landrover Jaguar rear view camera input cable late 2016 on

Rear view  camera interface for NTSC camera's. 

Landrover, and Range Rover and Jaguar  cars with 8" In Control Touch Pro screens. For model year late 2016  onwards

Includes plug and play harness  QUADLOCK connector

Stock code: 27-315
Price: £112.00 (£134.40 inc VAT)
Rear view camera input interface for BMW X5/X6 with CCC Navi or radio

Rear view camera input interface for BMW X5/X6 with CCC Navi or radio

Rear view camera input interface for BMW X5/X6 with CCC Navi or radio. Allows you to connect a rear-view camera to the CCC factory navigation system.


PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-316
Price: £119.00 (£142.80 inc VAT)
Mercedes Vito 2015 on W447  rear view camera interface for Audio 15 radio head-unit

Mercedes Vito 2015 on W447 rear view camera interface for Audio 15 radio head-unit

Rear view NTSC camera interface for Mercedes Benz Vito and Viano vehicles fitted with original Audio 15 head units.

Includes plug and play harness 

Stock code: 27-310
Price: £129.00 (£154.80 inc VAT)
Landrover Rangerover rear view camera interface for 3RD generation touch screen

Landrover Rangerover rear view camera interface for 3RD generation touch screen

Rear view  camera interface for Landrover Discovery 4 (2012-2015) and Range Rover  2011-2015 with 3nd generation 8.2" touch screen navigation, and In Control Touch Pro

Also provides Video in Motion

Includes plug and play harness  16 pin Grey connector

Stock code: 27-313
Price: £129.00 (£154.80 inc VAT)
Add a camera to Peugeot, Citroen, DS, Toyota, Vauxhall (2016 Onwards) FOR NAC 7/8 INCH TOUCHSCREEN

Add a camera to Peugeot, Citroen, DS, Toyota, Vauxhall (2016 Onwards) FOR NAC 7/8 INCH TOUCHSCREEN

Add a rear parking camera to the Original screen on select Peugeot, Citroen, DS, Toyota and Opel/ Vauxhall vehicle models with a 7 or 8 inch NAC High or Low navigation Touch screen monitor.

This interface allows you to connect a reverse camera to the original factory fitted touch screen and display a rear view camera image upon putting the vehicle into reverse gear.

Please note: This interface is designed for select Peugeot, Citroen, DS, Toyota and Opel/ Vauxhall vehicle models with a 7 or 8 inch NAC Touch screen

Stock code: 27-563
Price: £139.00 (£166.80 inc VAT)
Audi MIB2/Porsche PCM 4, 4.1/ Volkswagen Front & Rear view Camera interface

Audi MIB2/Porsche PCM 4, 4.1/ Volkswagen Front & Rear view Camera interface

This interface allows you to add rear and front cameras to the OEM monitor of select Audi group cars with MIB2, Porsche cars with PCM 4.0 or PCM 4.1 and Volkswagen vehicles with composition Media or Discover Pro systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected.

Stock code: 27-550
Price: £145.00 (£174.00 inc VAT)
Add camera to Audi A4, A5, Q5 Non MMI for Concert & Symphony system

Add camera to Audi A4, A5, Q5 Non MMI for Concert & Symphony system

This interface allows you to add a rear and front camera to the OEM monitor of an Audi car without a MMI system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Stock code: 27-552
Price: £145.00 (£174.00 inc VAT)
Add a camera to Peugeot/ Citroen (2013-2016) WITH SMEG 7 INCH NAVIGATION SCREEN

Add a camera to Peugeot/ Citroen (2013-2016) WITH SMEG 7 INCH NAVIGATION SCREEN

This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens.

It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Stock code: 27-559
Price: £147.00 (£176.40 inc VAT)
Landrover rear view camera interface for 2nd generation touch screen

Landrover rear view camera interface for 2nd generation touch screen

Rear view NTSC camera interface for Landrover Discovery 4 and Range Rover  2009-2012 with 2nd generation touch screen navigation

Also provides Video in Motion

Includes plug and play harness 

Stock code: 27-312
Price: £149.00 (£178.80 inc VAT)
Landrover Jaguar Camera input interface 2015-2016

Landrover Jaguar Camera input interface 2015-2016

Rear view  camera interface for a single NTSC camera

Fo cars with 8" In Control Touch Pro screens. Only for model year 2015-06/2016

Includes plug and play harness  QUADLOCK connector

Stock code: 27-314
Price: £149.00 (£178.80 inc VAT)
Add a camera to Peugeot/ Citroen (2019 Onwards) FOR NAC WITH 10/12 INCH TOUCHSCREEN

Add a camera to Peugeot/ Citroen (2019 Onwards) FOR NAC WITH 10/12 INCH TOUCHSCREEN

Add a rear parking  camera to the Original screen on select Peugeot and Citroen cars with NAC high or low navigation Touch screen monitors. Adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. Has optional Front camera or DVR input.

Please note: This interface is designed for Citroen/ Peugeot vehicles with a 9 ,10 or 12 inch NAC Touch screen

For 7 or 8 Inch NAC touch Screen, please use 27-563

Stock code: 27-563-10
Price: £149.00 (£178.80 inc VAT)
Audi A6L/A7/A8L Camera interface for  MMI 3G+ High

Audi A6L/A7/A8L Camera interface for MMI 3G+ High

Add rear and front cameras to the OEM monitor of  select Audi group cars with MMI 3G+ High

NOT suitable for MMI3G low/ basic

For Audi A6L/A7/A8L 2012-2016,  VW Touareg 8" Navigation screen

Harness is fitted at the front behind the  head-unit and in the rear boot area to the parking control module.

Stock code: 27-549
Price: £159.00 (£190.80 inc VAT)
Audi A1 Q3  Audi A4 (B8) A5 Q5  A6 Q7 (10-12)  Camera interface for  MMI 3G systems

Audi A1 Q3 Audi A4 (B8) A5 Q5 A6 Q7 (10-12) Camera interface for MMI 3G systems

Add a rear camera to the OEM monitor of  select Audi group cars with MMI 3G 

Audi A1 Q3 with MMI 3G high or low 

 Audi A4 (B8) Audi A5/Q5 , A6 /Q7(years 2010-2012 only) with MMI3G high or 3G+

An LVDS cable is fitted at the front behind the  head-unit and a cable harness to the CANbus gateway control module behind glove-box or under steering wheel.

Stock code: 27-551
Price: £159.00 (£190.80 inc VAT)
Front and Rear backup camera interface for Audi MMI 3G/3G+ (HARD WIRED)

Front and Rear backup camera interface for Audi MMI 3G/3G+ (HARD WIRED)

This interface allows you to add rear and front backup and parking cameras to the OEM monitor of an Audi car with MMI 3G or 3G+

It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

PLEASE NOTE: This interface requires hard wiring to the Audi's climate control module in order to generate the CANBUS. Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.

Stock code: 27-551-HW
Price: £159.00 (£190.80 inc VAT)
Add a camera to Mercedes with OEM NTG 5.0 systems

Add a camera to Mercedes with OEM NTG 5.0 systems

This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes car with original NTG5 audio system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Stock code: 27-553
Price: £159.00 (£190.80 inc VAT)
Mercedes front and rear camera interface NTG4.5

Mercedes front and rear camera interface NTG4.5

This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes car with Command APS NTG 4.5. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Stock code: 27-554
Price: £159.00 (£190.80 inc VAT)
v.Logic V5 front and rear view camera interface for BMW E-Series with CCC navi system or radio

v.Logic V5 front and rear view camera interface for BMW E-Series with CCC navi system or radio

V.Logic V5 front and rear view camera interface suitable for BMW E-Series models with a CCC iDrive navigation system.

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-V5-CCC
Price: £159.00 (£190.80 inc VAT)
Rear view camera input interface for Chrysler, Dodge, Fiat, Lancia with Uconnect head units

Rear view camera input interface for Chrysler, Dodge, Fiat, Lancia with Uconnect head units

Rear view camera input interface for Chrysler, Dodge, Fiat, Lancia cars with Uconnect head units and seperate 8.4 inch monitors. Only compatible for cars with Uconnect 5 inch or 8.4/ RB5 and 8.4/ RE2 system monitors with 22 pin connector. 

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-320
Price: £169.00 (£202.80 inc VAT)
Rear view camera activation interface 52pin for Dodge,Jeep and Fiat with Uconnect head units

Rear view camera activation interface 52pin for Dodge,Jeep and Fiat with Uconnect head units

Rear view camera interface for the activation of the factory rear view camera input. Compatible with Dodge,Jeep and Fiat cars with Uconnect 5 inch or 8.4 inch systems with 52 pin connection.

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-321
Price: £169.00 (£202.80 inc VAT)
Video inserter for Renault, Dacia, Smart ,Fiat models with RLink, MediaNav or Opel Navi50 or Navi80

Video inserter for Renault, Dacia, Smart ,Fiat models with RLink, MediaNav or Opel Navi50 or Navi80

PCB Insertion needed between the head-unit and the Monitor . NOT suitable for DIY users

  • Video-inserter for factory-infotainment systems
  • 1 CVBS Rear-view camera video-input
  • 2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner, ...)
  • Automatic switching to rear-view camera input on engagement of the reverse gear
  • Video-in-motion (ONLY for connected video-sources)
  • Video-inputs NTSC compatible


PLEASE CHECK LONG DESCRIPTION NOTES FOR COMPATIBILITY

Stock code: 27-544
Price: £169.00 (£202.80 inc VAT)
Rear and front  view camera interface for MINI with NBT I-drive  Navigation  6.5 or 8 inch

Rear and front view camera interface for MINI with NBT I-drive Navigation 6.5 or 8 inch

Suitable for MINI cars  made between 2013 and 2016 with cars with NBT Navigation on a 6.5 or 8inch screen


PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-571
Price: £169.00 (£202.80 inc VAT)
Rear view camera interface for BMW with NBT Navigation

Rear view camera interface for BMW with NBT Navigation

This camera interface allows you to add a rear  and/or front view camera to the existing OEM monitor. Suitable for BMW cars with NBT Navigation on a 6.5, 8.8 or 10.25 inch OEM monitor. 


PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-571
Price: £169.00 (£202.80 inc VAT)
MINI  rear view camera/video input interface ( EVO  BIS basic 6.5inch radio only)

MINI rear view camera/video input interface ( EVO BIS basic 6.5inch radio only)

Extra PCB insertion required into original radio . 

Only Suitable for Mini 6.5inch basic EVO BIS radio with all-in-one radio behind screen

the BIS radio has a 42 pin rectangular connector rather than the standard 40 pin that is in the EVO systems and NBT systems

PLEASE NOTE: not recommended for DIY . Experienced engineers only.

Stock code: 27-545
Price: £179.00 (£214.80 inc VAT)
Add rear camera  Land Rover / Jaguar (2012-15 with Bosch 8" Touch Screen Navigation)

Add rear camera Land Rover / Jaguar (2012-15 with Bosch 8" Touch Screen Navigation)

CAN BUS reverse switching is ONLY FOR VEHICLES WITH AUTOMATIC GEAR SHIFT

Suitable for Land Rover/ Jaguar models with factory fitted Bosch head units with 8 inch touch screen display. 2012 to 2015.

Jaguar F Type (13-15) Jaguar XF X250 (12-15) Jaguar XJ X351 (10-15)

Landrover Discovery4 L319 (12-14), Freelander 2 L359 (2013 only) Range Rover Vogue L322 ,Sport L320 (facelift)  Evoque L358

Stock code: 27-546
Price: £179.00 (£214.80 inc VAT)
Add rear camera interface for Land Rover/ Jaguar (with Harmon 8" head unit display)

Add rear camera interface for Land Rover/ Jaguar (with Harmon 8" head unit display)

This camera interface allows you to add an aftermarket camera to the original OEM head unit. Suitable for Land Rover/ Jaguar models with factory fitted Harmon head units with 8 inch display.

Stock code: 27-547
Price: £179.00 (£214.80 inc VAT)
Volvo SENSUS 7"  (2014-2017) camera interface

Volvo SENSUS 7" (2014-2017) camera interface

This interface allows you to add a rear and front camera to the OEM monitor of a 2014 to 2017 onward Volvo car with Sensus technology.

ONLY FOR CARS WITH NAVIGATION AND  GLOBE SYMBOL ON RADIO 

It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Stock code: 27-557
Price: £179.00 (£214.80 inc VAT)
Add a Camera to Volkswagen ID3 ID4 ID5 with 10" multimedia tablet screen

Add a Camera to Volkswagen ID3 ID4 ID5 with 10" multimedia tablet screen

This interface allows you to add rear camera to the OEM monitor of select VW cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Connects at the head-unit control module beneath glove box

Stock code: 27-584
Price: £187.00 (£224.40 inc VAT)
Mercedes A-Class front and rear camera interface NTG 6 (10.25-Inch screen)

Mercedes A-Class front and rear camera interface NTG 6 (10.25-Inch screen)

This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes A-Class with Command APS NTG 6 (10.25-inch screen)

Stock code: 27-592
Price: £189.00 (£226.80 inc VAT)
Add a parking camera to Mercedes SPRINTER (2018 Onwards) MBUX 7" without Navigation

Add a parking camera to Mercedes SPRINTER (2018 Onwards) MBUX 7" without Navigation

Add  front and /or rear camera to the original screen on Mercedes Sprinter vehicles 2018 onwards with MBUX NTG6 system with a 7 inch screen without satellite navigation

Only suitable for  Mercedes vehicles with a 7 inch screen without satellite navigation. The connector behind the radio is 31-pin

DOES NOT  show original PDC ( Park distance control ) when camera is engaged

Stock code: 27-597
Price: £189.00 (£226.80 inc VAT)
Vauxhall Adam, Corsa E, Mokka, Zafira R4.0 IntelliLink rear view camera and video input interface

Vauxhall Adam, Corsa E, Mokka, Zafira R4.0 IntelliLink rear view camera and video input interface

Rear view camera and video input interface for  Vauxhall/Opel models with R4.0 IntelliLink system and 7" Monitor with Radio DIN-cage attached to it. (all in one units)

This NOT plug and play as a new PCB needs to be attached to the existing radio. Not for models with a separate screen away from the radio module.

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-565
Price: £190.00 (£228.00 inc VAT)
Alfa Romeo, Citroen, Dodge, Fiat rear view camera/video input interface (Uconnect 5 VP2/RA2 Systems)

Alfa Romeo, Citroen, Dodge, Fiat rear view camera/video input interface (Uconnect 5 VP2/RA2 Systems)

Rear view camera and video input interface suitable for various Alfa Romeo, Citroen, Dodge and Fiat vehicles with Uconnect 5 VP2/ RA2 with DIN housing behind the front panel and 5 inch monitor . This interface allows you to connect a rear-view camera and two additional video-sources to a factory-infotainment system. 

PLEASE NOTE: Only Suitable for Uconnect 5 VP2/RA2 systems with CD-drive and DIN-shell behind front-panel

Stock code: 27-568
Price: £195.00 (£234.00 inc VAT)
Add a Camera to Audi A4/ A5/ Q5 (2021on) Audi A3/Q3 (2022 on) with MIB3 multimedia systems

Add a Camera to Audi A4/ A5/ Q5 (2021on) Audi A3/Q3 (2022 on) with MIB3 multimedia systems

This interface allows you to add rear camera to the OEM monitor of select Audi cars with MIB3 multimedia

It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Connects at the head-unit control module beneath glove box

Fits  Audi A4/A5/Q5 (2021 facelift upwards)  Audi A3 (2021 on), Audi Q3 (2022 on)

Stock code: 27-593
Price: £195.00 (£234.00 inc VAT)
Vauxhall  R4.0 IntelliLink camera input (7" Monitor with separate radio module)

OUT OF STOCK

Vauxhall R4.0 IntelliLink camera input (7" Monitor with separate radio module)

Rear view camera and video input interface for  Vauxhall/Opel models with R4.0 IntelliLink system and 7" Monitor with separate  radio module

Astra K (Sports Tourer and 5 door models) 2016-2019, Insignia B (2017-06/2018) Karl up to 03/2018, Chevrolet Camaro 2016 on.

Not suitable for models with all in one radio and monitor. Use item 27-565 for these.

PLEASE CHECK LONG DESCRIPTION NOTES 

Stock code: 27-566
Price: £196.00 (£235.20 inc VAT)
Add front/ rear view camera to Freelander 2, Discovery 3, Range Rover Sport L320 car models

Add front/ rear view camera to Freelander 2, Discovery 3, Range Rover Sport L320 car models

Front and rear view camera and video input interface for various Land Rover models with GVIF technology/ touch screen navigation version 1 and 1.1. This interface allows for rear-view camera input and two additional video sources.

PLEASE NOTE: Only suitable for vehicles with factory navigation

THIS INTERFACE ONLY WORKS WITH NAVIGATION SWITCHED ON

Stock code: 27-311
Price: £198.00 (£237.60 inc VAT)
Add front/ rear view camera to Buick LaCrosse/ Regal (WITH CD500/ DVD800 SYSTEMS)

Add front/ rear view camera to Buick LaCrosse/ Regal (WITH CD500/ DVD800 SYSTEMS)

Add an aftermarket front and/or rear view camera to the vehicles factory Navigation screen on select Buick LaCrosse and Regal car models with factory fitted CD500/ DVD800 systems.

  • Video feeder for factory infotainment systems
  • 1 CVBS rear view camera video input
  • 2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner)
  • Automatic switching to the rear view camera input when engaging reverse gear
  • Image activation during the Driving (ONLY for fed video)
  • Video inputs NTSC compatible

PLEASE NOTE: Only suitable for vehicles with factory navigation switched on

Stock code: 27-311
Price: £198.00 (£237.60 inc VAT)
Add front/ rear view camera to Vauxhall Astra J, Insignia A and Meriva B (CD500/ DVD800 SYSTEMS)

Add front/ rear view camera to Vauxhall Astra J, Insignia A and Meriva B (CD500/ DVD800 SYSTEMS)

Add an aftermarket front and/or rear view camera to the vehicles factory Navigation screen on select Vauxhall Astra J, Insignia A and Meriva B car models with factory fitted CD500/ DVD800 systems.

  • Video feeder for factory infotainment systems
  • 1 CVBS rear view camera video input
  • 2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner)
  • Automatic switching to the rear view camera input when engaging reverse gear
  • Image activation during the Driving (ONLY for fed video)
  • Video inputs NTSC compatible

PLEASE NOTE: Only suitable for vehicles with factory navigation switched on

Stock code: 27-311
Price: £198.00 (£237.60 inc VAT)
Add front/ rear view camera to Jaguar XF (X250) with Version 1.1 Navigation touch screen

Add front/ rear view camera to Jaguar XF (X250) with Version 1.1 Navigation touch screen

Add an aftermarket front and/or rear view camera to the vehicles factory Navigation screen on select Jaguar XF (X250) car models with factory fitted Version 1.1 touch-screen navigation 

  • Video feeder for factory infotainment systems
  • 1 CVBS rear view camera video input
  • 2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner)
  • Automatic switching to the rear view camera input when engaging reverse gear
  • Image activation during the Driving (ONLY for fed video)
  • Video inputs NTSC compatible

PLEASE NOTE: The vehicle must be in navigation map view in order to see the reverse camera

Stock code: 27-311
Price: £198.00 (£237.60 inc VAT)
Add front and/or rear camera interface for Mercedes Benz NTG 5.5

Add front and/or rear camera interface for Mercedes Benz NTG 5.5

This camera interface allows you to add a rear and/or front camera to the OEM monitor of a Mercedes car with original NTG5.5 audio system. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Only suitable for Mercedes cars with original NTG 5.5 audio systems with either a 10.2 or 12.3 inch monitor

Stock code: 27-555
Price: £198.00 (£237.60 inc VAT)
Vauxhall Opel Video inserter for cars with DVD600,800,900,950,CD500,600 Intellilink systems

Vauxhall Opel Video inserter for cars with DVD600,800,900,950,CD500,600 Intellilink systems

Compatible with Vauxhall , Opel, Chevrolet and Buik  CD500, DVD600/800/900, CD600 Intellilink and DVD950 Intellilink infotainment systems.

Atra J, GTc, Insignia A, MerivaB, Mokka A and other vehicles model year 2012-2013

Front and rear view camera and video input interface. 

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-564
Price: £198.00 (£237.60 inc VAT)
Add front and/or rear view camera interface for BMW with ID7/ MGU iDrive systems

Add front and/or rear view camera interface for BMW with ID7/ MGU iDrive systems

This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for select BMW cars with ID7/ MGU (Media Graphic Unit) iDrive systems on either a 10.2 or 12.3 inch screen.

PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS

Stock code: 27-574
Price: £198.00 (£237.60 inc VAT)
Add front-rear camera to Audi Q3 (2011>) with MMI 3G+

Add front-rear camera to Audi Q3 (2011>) with MMI 3G+

Add front/rear camera to original OEM system on a Audi Q3 (2011>) with MMI 3G+
Stock code: 27-580
Price: £198.00 (£237.60 inc VAT)
Add camera to Vauxhall cars with Navi 900 Intellilink Systems

Add camera to Vauxhall cars with Navi 900 Intellilink Systems

Video inserter for  Vauxhall / Opel cars with Navi 900 Intellilink Systems ( Gen1 and 2) with 8 inch touch monitor or Chevrolet cars with MyLink IO6 infotainment

Insignia A (2014-2016) , Insignia B (20174-06/2018), Mokka X (2016-2020) Astra K (2016-2019)

Stock code: 27-590
Price: £198.00 (£237.60 inc VAT)
Mercedes A-Class front and rear camera interface NTG 6 (7-Inch screen)

Mercedes A-Class front and rear camera interface NTG 6 (7-Inch screen)

This interface allows you to add a rear and front camera to the OEM monitor of a Mercedes A-Class with Command APS NTG 6 (7-inch screen)

Stock code: 27-591
Price: £198.00 (£237.60 inc VAT)
Add a parking camera to Mercedes SPRINTER (2018 Onwards) MBUX 7" WITH Navigation

Add a parking camera to Mercedes SPRINTER (2018 Onwards) MBUX 7" WITH Navigation

Add  front and /or rear camera to the original screen on Mercedes Sprinter vehicles 2018 onwards with MBUX NTG6 system with a 7 inch screen with Original navigation

Only suitable for  Mercedes vehicles with a 7 inch screen with satellite navigation. The connector behind the radio is 26-pin

DOES NOT  show original PDC ( Park distance control ) when camera is engaged

NOT SUITABLE FOR 10 inch screen systems

Stock code: 27-596
Price: £198.00 (£237.60 inc VAT)
Add a camera to Audi Systems with MMI, 4G and MIB2 (HARD WIRED)

Add a camera to Audi Systems with MMI, 4G and MIB2 (HARD WIRED)

This interface allows you to add A front/ rear view camera to the OEM monitor of Audi car models with original MMI, MMI Nav +, 4G MMI and MIB2 audio systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

The adapter also has video inputs for external video sources connection such as an additional camera, DVD or Android TV boxes.

PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician

PLEASE CHECK THE COMPATIBLITY OF YOUR VEHICLE IN THE LONG DESCRIPTION 

Stock code: 27-550-HW
Price: £199.00 (£238.80 inc VAT)
Porsche PCM3 and PCM3.1 front and rear-view camera interface (Video-in-motion)

Porsche PCM3 and PCM3.1 front and rear-view camera interface (Video-in-motion)

This interface allows you to add an aftermarket front and/or rear view camera to the factory infotainment system. Compatible with Porsche cars with PCM 3 and PCM 3.1 navigation systems.

Stock code: 27-573-2
Price: £199.00 (£238.80 inc VAT)
Front and Rear camera interface for Mercedes NTG 5.5/ NTG6 MBUX (HARD WIRED)

Front and Rear camera interface for Mercedes NTG 5.5/ NTG6 MBUX (HARD WIRED)

This interface allows you to add rear and front backup and parking cameras to the OEM monitor of select Mercedes car models (WITH NTG 5.5/ NTG6 MBUX)

It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician

Locations and connections can vary depending on the car model. Please refer to installation instructions for more info.

Stock code: 27-592-HW
Price: £199.00 (£238.80 inc VAT)
Add a camera to Audi TT (2015 Onwards) (HARD WIRED)

Add a camera to Audi TT (2015 Onwards) (HARD WIRED)

This interface allows you to add rear and front backup and parking cameras to the OEM monitor on Audi TT (2015 Onwards) car models. 

It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

PLEASE NOTE: This interface requires hard wiring to the original head units main connector in order to generate the CANBUS. We recommend this be done by an experienced car audio technician

Please refer to installation instructions for more info.

Stock code: 27-595-HW
Price: £199.00 (£238.80 inc VAT)
Porsche PCM3 and PCM3.1 rear-view camera interface

Porsche PCM3 and PCM3.1 rear-view camera interface

Rear-view camera input and video in motion interface for Porsche PCM3 and PCM3.1 navigation systems

Includes plug and play harness  QUADLOCK connector

Stock code: 27-573
Price: £200.00 (£240.00 inc VAT)
Add front and/or rear view camera interface for BMW with NBT2 EVO ID5/ID6 iDrive systems

Add front and/or rear view camera interface for BMW with NBT2 EVO ID5/ID6 iDrive systems

 Suitable for BMW , MINI cars with NBT2  EVO ID5/ID6 systems on a 6.5, 8.8 or 10.25 inch OEM monitor. 

NB. Dynamic parking guidelines are not available for all vehicles. Factory PDC display  may not work on all vehicles. 

PLEASE SEE LONG DESCRIPTION 

Stock code: 27-572
Price: £204.00 (£244.80 inc VAT)
Add REAR , FRONT & SIDE cameras to Mercedes Sprinter 2019 MBUX NTG6 with Navigation

Add REAR , FRONT & SIDE cameras to Mercedes Sprinter 2019 MBUX NTG6 with Navigation

Add camera (S) to OEM system on a  2019 Mercedes Sprinter (W907/910) with MBUX NTG6 system with either a 7 or 10.25 inch screen and satellite navigation.
Stock code: 27-579
Price: £212.00 (£254.40 inc VAT)
Camera to Ford 2018 models with Sync 2.5 Tablet (Sync3 light/R5) version or Sync Connected Radio 4"

Camera to Ford 2018 models with Sync 2.5 Tablet (Sync3 light/R5) version or Sync Connected Radio 4"

Suitable for select Ford vehicles 2018 on with 32 pin SQUARE CONNECTOR. 

with Sync Connect  4inch or Sync 2.5 (Sync3 light /R5) Tablet version.  6.5/7/8 inch  

Normally not for vehicles with Navigation ( these have Sync 3 full version)

PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS

Stock code: 27-586
Price: £221.00 (£265.20 inc VAT)
Add FRONT REAR & SIDE  camera's to Mercedes MBUX (2019 On) with NTG6 without Navigation

Add FRONT REAR & SIDE camera's to Mercedes MBUX (2019 On) with NTG6 without Navigation

Add camera (S) to OEM system on a select Mercedes vehicles (2019 Onwards) with MBUX NTG6 system with a 7 inch screen without satellite navigation

This interface can be used when adding front, rear and side view cameras to a 2019 onwards Mercedes with MBUX NTG6 such as Mercedes A-Class (W177), B-Class (W247), CLA-Coupe (C118), GLB (X247) and Sprinter(W907/910)


PLEASE NOTE: Only suitable for select Mercedes vehicles (2019 Onwards) with a 7 inch screen without satellite navigation and 31-pin connector

Stock code: 27-582
Price: £225.00 (£270.00 inc VAT)
Volkswagen ID3 ID4 ID5 (10 inch screen) camera integration kit (REGISTRATION/ NUMBER PLATE FIT)

Volkswagen ID3 ID4 ID5 (10 inch screen) camera integration kit (REGISTRATION/ NUMBER PLATE FIT)

Add a rear parking camera to the Original screen on select Volkswagen ID3 ID4 ID5 vehicle models with a 10 inch multimedia tablet MIB3 screen monitor.

The interface included in this kit allows you to add a rear camera to the OEM monitor of select VW cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

This integration kit also comes complete with a UK & European car number plate/ registration plate frame with built in rear view camera, providing additional visual safety to the back of the vehicle, whilst maintaining its original appearance.

Stock code: CK-VW-ID
Price: £232.00 (£278.40 inc VAT)
Camera input for Renault vehicles with R-LINK2 Infotainment (7" or 8.7" Monitor)

Camera input for Renault vehicles with R-LINK2 Infotainment (7" or 8.7" Monitor)

ONLY SUITABLE FOR 2016 Onwards models  with RLINK 2  

Captur, Clio  2017- 2019, Espace 2016- 2020, Kadjar, Koleos 2016 >,

Master, Megane, Talisman 2016- 2020,Scenic from 10/2016,


PLEASE CHECK LONG DESCRIPTION NOTES 

Stock code: 27-561
Price: £235.00 (£282.00 inc VAT)
Volkswagen T-Cross (DISCOVER MEDIA) camera integration kit (Tailgate handle fit)

Volkswagen T-Cross (DISCOVER MEDIA) camera integration kit (Tailgate handle fit)

Add a rear parking camera to the Original screen on select Volkswagen T-Cross vehicle models with a Discover Media system.

The interface included in this kit allows you to add a rear camera to the OEM monitor on select Volkswagen T-Cross car models. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

This integration kit also comes complete with a tailgate handle camera which secures into the place of the original tailgate handle housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.

Stock code: CK-VW-T-CROSS
Price: £241.66 (£289.99 inc VAT)
Renault Easy Link camera input (7" Monitor or 9" Tablet )

Renault Easy Link camera input (7" Monitor or 9" Tablet )

Video inserter for front and rear view camera  for 7" Monitor or 9.3inch Tablet

Not suitable for  models with  7inch Tablet or for models with Easylink all in one units with Din cage behind the Monitor.

Captur, Clio V ,Espace 2020 >, Megane Twingo 2021 on,


PLEASE CHECK LONG DESCRIPTION NOTES 

Stock code: 27-598
Price: £244.00 (£292.80 inc VAT)
Smartphone/ Camera integration for Audi A6/A7 (2012-2015) with MMI 3G+ Systems

Smartphone/ Camera integration for Audi A6/A7 (2012-2015) with MMI 3G+ Systems

Smartphone/ Camera integration for Audi A6/A7 (2012-2015) with MMI 3G+ Systems (WITH OEM 6.5 INCH SCREEN DISPLAY)

For later facelift models (2016-2018) with MMI 4G+ systems, please use 27-837

PLEASE NOTE: PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!

Stock code: 27-833
Price: £260.00 (£312.00 inc VAT)
Smartphone/ Camera integration for Audi A8 with MMI High 3G

Smartphone/ Camera integration for Audi A8 with MMI High 3G

Smartphone/ Camera integration for Audi A8 (2012-2017) with MMI High 3G System (7 INCH OEM screen) 

PLEASE CHECK LONG DESCRIPTION

Stock code: 27-834
Price: £260.00 (£312.00 inc VAT)
Smartphone/ Camera integration for Audi Q7 with MMI 3G+ System 6.5 INCH

Smartphone/ Camera integration for Audi Q7 with MMI 3G+ System 6.5 INCH

Smartphone/ Camera integration designed for Audi Q7 (2012-2015) with MMI 3G+ system (6.5 INCH OEM screen) 

PLEASE CHECK LONG DESCRIPTION

Stock code: 27-835
Price: £260.00 (£312.00 inc VAT)
Smartphone/ Camera integration for Audi A1 (13-18) with MMI 3G System

Smartphone/ Camera integration for Audi A1 (13-18) with MMI 3G System

Smartphone/ Camera integration designed for Audi A1 (2013-2018) car models with MMI 3G systems.

PLEASE NOTE: This interface requires inserting a PCB Board to the original screen and dismantling the original Audi Radio. This should only be carried out by professional car audio technicians! 

PLEASE CHECK LONG DESCRIPTION

Stock code: 27-838
Price: £260.00 (£312.00 inc VAT)
Smartphone/ Camera integration for Audi Q3 (14-18) with MMI 3G+ HIGH Systems (7 INCH WITH NAVI)

Smartphone/ Camera integration for Audi Q3 (14-18) with MMI 3G+ HIGH Systems (7 INCH WITH NAVI)

Smartphone/ Camera integration for Audi Q3 (2014-2018) car models with MMI 3G+ High Systems (7 INCH SCREEN WITH NAVI)

PLEASE NOTE: This interface installation should only be carried out by professional car audio technicians or an individual with relevant car audio experience

PLEASE READ LONG DESCRIPTION AND INSTRUCTIONS BEFORE PURCHASING!

Stock code: 27-839
Price: £260.00 (£312.00 inc VAT)
Smartphone/ Camera integration for Peugeot/ Citroen cars with NAC systems

Smartphone/ Camera integration for Peugeot/ Citroen cars with NAC systems

Smartphone/ Camera integration for Peugeot and Citroen vehicles from 2016 onwards with NAC high or low navigation Touch screen monitors. Features include Carplay, Android Auto and screen mirroring.

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-870
Price: £260.00 (£312.00 inc VAT)
Smartphone/ Camera integration for Audi with MIB 2 systems

Smartphone/ Camera integration for Audi with MIB 2 systems

Wired Smartphone/ Camera integration designed for Audi cars with OEM MIB II systems with 7 or 8.3 inch screens. The car must have AUX in for this interface to work.

This interface is NOT wireless and needs the smartphone to be connected by USB

The original MIB 2 system consists of the MIB 2 main unit with either a 7/8.3 inch monitor with 4pin LVDS connector.

PLEASE CHECK LONG DESCRIPTION

Stock code: 27-875
Price: £260.00 (£312.00 inc VAT)
Camera inserter  Mercedes Benz Actros 5 and Arocs with Multimedia cockpit  (26pin radio connector)

Camera inserter Mercedes Benz Actros 5 and Arocs with Multimedia cockpit (26pin radio connector)

Suitable for  Actros 2018 and Arocs 2020 vehicles 10.25 inch Monitor 26 pin radio connector without Navigation. 

The multimedia cockpit with 10.25inch monitor is available with and without navigation. With navigation always has the 31pin radio connector, without navigation has either the 31pin or a 26pin radio connector. For the version with 31pin radio connector, the interface with the item number 27-588 ( RL4-MBMC) is available including a 31pin plug & play harness.

 

PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS

Stock code: 27-587
Price: £279.00 (£334.80 inc VAT)
Camera inserter  Mercedes Benz Actros 5 and Arocs with Multimedia cockpit  (31pin radio connector)

Camera inserter Mercedes Benz Actros 5 and Arocs with Multimedia cockpit (31pin radio connector)

 Suitable for  Actros 2018 and Arocs 2020 vehicles 10.25 inch Monitor 31 pin  normally with Navigation. 

The multimedia cockpit with 10.25inch monitor is available with and without navigation. With navigation always has the 31pin radio connector, without navigation has either the 31pin or a 26pin radio connector. For the version with 26pin radio connector, the interface with the item number 27-587 ( RL4-MBMRT) is available including a 26pin plug & play harness.

 

PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS

Stock code: 27-588
Price: £279.00 (£334.80 inc VAT)
Add Carplay/ Android Auto to Peugeot and Citroen cars with SMEG/ MRN navigation systems

Add Carplay/ Android Auto to Peugeot and Citroen cars with SMEG/ MRN navigation systems

Smartphone/ Camera integration for Peugeot and Citroen vehicles with SMEG/MRN navigation systems. Features include Carplay, Android Auto and screen mirroring.

PLEASE CHECK LONG DESCRIPTION FOR COMPATIBILITY NOTES 

Stock code: 27-869
Price: £283.00 (£339.60 inc VAT)
Smartphone/ Camera integration for Mercedes with NTG 4.5 and 4.7 OEM system 2012-2015

Smartphone/ Camera integration for Mercedes with NTG 4.5 and 4.7 OEM system 2012-2015

AUDIO IS VIA THE CARS AUX IN SELECTION. The USB can be converted using 24-040 or AUX can be activated by a Mercedes specialist dealer 

Smartphone/ Camera integration designed for Mercedes with NTG 4.5 and 4.7 OEM system 2012-2015

PLEASE CHECK LONG DESCRIPTION

Stock code: 27-876
Price: £295.00 (£354.00 inc VAT)
Add camera to original OEM screen for Land Rover with dual screen systems (Touch Pro Duo System)

Add camera to original OEM screen for Land Rover with dual screen systems (Touch Pro Duo System)

This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor. Suitable for Land Rover cars with dual screen systems (Touch Pro Duo)

PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS

Stock code: 27-578
Price: £306.00 (£367.20 inc VAT)
Add camera interface for Land Rover Discovery 5 /Jaguar E Pace   with 10.25" Harman  (Touch Pro)

Add camera interface for Land Rover Discovery 5 /Jaguar E Pace with 10.25" Harman (Touch Pro)

This camera interface allows you to add a front and/or rear view camera to the existing OEM monitor.

Only suitable for Discovery 5 and Jaguar E Pace 2016 >  with 10" single screen Harman systems (Touch Pro)

FITTED UNDERNEATH DRIVERS OR PASSENGER SEAT

PLEASE CHECK LONG DESCRIPTION FOR FURTHER DETAILS

Stock code: 27-577-A
Price: £332.50 (£399.00 inc VAT)