Please find our all of our Skoda fitting parts listed below: Car audio cables, parking sensor interfaces, steering wheel control cables, amplifier intergration & bypass cables, antenna adapters, speaker rings, reversing & rear view cameras, fascias, and full stereo upgrade kits
Return to all Skoda cars
Complete stereo upgrade fitting kit to install a single or double DIN aftermarket radio in various Volkswagen cars.
This head unit fitting kit includes:
-Fascia adapter panel (50-172)
-Radio replacement adapter cable (20-156A)
-Antenna adapter (Part of 20-156A)
For double din installation the central bar of the fascia needs to be cut out.
Complete stereo upgrade fitting kit to install a single DIN head unit into various 2005 onwards Volkswagen car models.
This kit is suitable for VW car models with a Single Fakra antenna connection on the back of the original radio
Includes a pre-wired CANbus interface to generate a key present ignition feed.
This kit includes:
-Fascia with removable pocket (50-172)
-Quadlock to ISO cable with built in CANbus interface (20-156A-IGN)
-Fakra Antenna adapter (Part of 20-156A-IGN)
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars
This head unit fitting kit includes:
- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)
- Quadlock to ISO radio adapter harness, with CANbus ignition (20-156-IGN)
- Single DIN flush fit fascia adapter with side fixing brackets (50-172)
PLEASE NOTE: DOES NOT RETAIN STEERING WHEEL CONTROLS
Complete stereo upgrade fitting kit to install a single DIN aftermarket radio in various Volkswagen cars (WITH ORIGINAL RCD210 RADIO HEAD UNITS)
This head unit fitting kit includes:
- Fakra to DIN antenna adapter cable (12v phantom) with bullet connection (21-123K)
- Radio replacement steering wheel adapter interface (49-VW-01)
- Universal SWC Patch Lead (49-025)
- Fascia adapter panel (50-172)
Complete stereo upgrade fitting kit to install a single DIN aftermarket radio in various Volkswagen cars (WITH ORIGINAL RCD210 RADIO HEAD UNITS)
This head unit fitting kit includes:
- Fakra to DIN antenna adapter cable (12v phantom) (21-123)
- Radio replacement steering wheel adapter interface (29-UC-050-VW1)
- Universal patch lead set for steering control interface (29-UCCAB-SET)
- Fascia adapter panel (50-172)
Complete stereo upgrade fitting kit to install a SIngle DIN aftermarket radio in various Volkswagen cars
This head unit fitting kit includes:
- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)
- Radio replacement steering wheel adapter interface (49-VW-01)
- Universal SWC Patch Lead (49-025)
- Single DIN fascia adapter with removable pocket (50-172)
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a SIngle DIN aftermarket radio in various Volkswagen cars
This head unit fitting kit includes:
- Double Fakra to DIN aerial adapter (Phantom Power) (21-139)
- Radio replacement steering wheel adapter interface (29-UC-050-VW1)
- Universal patch lead set for steering control interface (29-UCCAB-SET)
- Single DIN fascia adapter with removable pocket (50-172)
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars
Suitable for cars with Highline specification or an Amplifier.
This head unit fitting kit includes:
- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)
- Radio replacement steering wheel adapter interface (49-VW-02)
- Universal SWC Patch Lead (49-025)
- Single DIN fascia adapter with removable pocket (50-172)
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection.
This head unit fitting kit includes:
- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)
- Radio replacement steering wheel adapter interface (49-VW-05)
- Universal SWC Patch Lead (49-025)
- Single DIN facsia adapter with removable pocket (50-172)
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.
This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original radio
This head unit fitting kit includes:
- Fakra to DIN antenna adapter cable (12v phantom) with bullet connection (21-123K)
- Radio replacement steering wheel adapter interface (49-VW-01)
- Universal SWC Patch Lead (49-025)
- Single DIN car audio fascia adapter (50-234)
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.
This head unit fitting kit includes:
- Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)
- Radio replacement steering wheel adapter interface (49-VW-02)
- Universal SWC Patch Lead (49-025)
- Single DIN car audio fascia adapter (50-234)
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio into VW UP, Seat Mii, Skoda Citigo car models.
This head unit fitting kit includes:
- Quadlock to ISO radio adapter harness, with CANbus ignition and antenna adapter (20-156A-IGN)
- VW UP, Seat Mii, Skoda Citigo Single DIN car radio fascia adapter (50-389)
Complete stereo upgrade kit to install a double din aftermarket radio in a 2008 - 2015 Skoda Superb with original Swing or Bolero radios.
This head unit fitting kit includes:
Complete stereo upgrade kit to install a single or double din aftermarket radio in a 2008 - 2015 Skoda Superb with original Swing or Bolero radios and retain the use of the original steering wheel audio control buttons.
This head unit fitting kit includes:
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars
This head unit fitting kit includes:
PLEASE NOTE: DOES NOT RETAIN STEERING WHEEL CONTROLS
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars
This head unit fitting kit includes:
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars
This head unit fitting kit includes:
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars
Suitable for cars with Highline specification or an Amplifier.
This head unit fitting kit includes:
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio in various Volkswagen cars with new (2015 onwards) style quadlock connection.
This head unit fitting kit includes:
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete fitting kit to install a Kenwood DMX 8021DABS head unit into Volkswagen Caddy, Transporter T6 , Amarok and Beetle vehicle models.
Kit includes a pre-wired CANbus interface to provide Ignition, Illumination and Reverse signal, as well as retaining steering wheel controls, Park Pilot screen and Climate control display.
Comes complete with a Kenwood DMX-8021DABS Double DIN stereo head-unit with Car Play and Android Auto.
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.
This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original radio
This head unit fitting kit includes:
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.
This head unit fitting kit includes:
PLEASE NOTE: FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD
Complete stereo upgrade kit to install a Double DIN aftermarket radio with select Volkswagen and VW Group vehicles.
Complete stereo upgrade fitting kit to install a Double DIN head unit into various 2005 onwards Volkswagen car models.
This kit is suitable for VW car models with a single Fakra antenna connection on the back of the original radio
This complete stereo upgrade fitting kit includes:
PLEASE NOTE: If a cage is not included with your aftermarket head unit, you will require part number 51-013
Complete stereo upgrade fitting kit to install a Double DIN head unit into various 2005 onwards Volkswagen car models.
This kit is suitable for VW car models with a single Fakra antenna connection on the back of the original radio
This complete stereo upgrade fitting kit includes:
PLEASE NOTE: If a cage is not included with your aftermarket head unit, you will require part number 51-013
The new INE-W611D navigation system is an amazing all-in-one solution with built-in iGo Primo navigation using TomTom maps, as well as a CD/DVD drive. The 6.5-inch touch-screen displays navigation maps, menus and movies clear and crisp. Enjoy DAB+ digital radio and use authorized apps in your car with Apple CarPlay and Android Auto. Take advantage of your two USB ports, allowing you to charge your phone and playback music from your USB stick at the same time.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The KD-DB922BT is a musical all-rounder in every respect. It provides crystal-clear radio reception via DAB+ or FM. Thanks to Bluetooth, music can be played back from a cell phone - hands-free function for two phones included! Thanks to the Amazon Alexa function, the digital voice assistant can now also be used conveniently via the car radio.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering.
JVC KD-X282BT (Mechless) Single DIN car stereo head unit with Bluetooth hands-free calling & music streaming, Spotify app control, iPhone music & charging and Android smartphone music playback.
Spotify app users will be delighted to know that this receivers is fully compatible for playback and music search.
PLEASE NOTE: There is no CD mechanism included in this model. However, this does allow us to reduce the depth of the product to 100mm which will fit into vehicles having less dashboard audio space than traditional products.
This JVC KW-M565DBT Short Body Double DIN stereo head unit comes with integrated DAB+ tuner for crystal clear radio listening and Bluetooth technology for hands-free calling and wireless music streaming.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DMX5020DABS Double DIN radio Head Unit with DAB and enhanced wired Smartphone connections (Apple Carplay/ Android Auto) 6.8" Touch screen with wired Apple CarPlay and Android Auto, Spotify Direct Control, DAB/FM/MW/LW Radio, Bluetooth hands-free calling and music streaming, iPod/iPhone music playback and USB.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DMX-8021DABS Double DIN radio Head Unit with DAB and enhanced wireless Smartphone connections (Apple Carplay/ Android Auto)
7 inch double DIN touchscreen with DAB+ Radio, Bluetooth Android Auto and WIFI Wireless Apple CarPlay.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DMX7722DABS Double DIN radio Head Unit with DAB+ and enhanced wireless Smartphone connections (Apple Carplay/ Android Auto)
6.8 inch Double DIN touchscreen with DAB+ Radio, Bluetooth, WIFI Wireless Apple CarPlay and Android Auto.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood DPX-7300DAB Double DIN radio Head Unit with CD/USB Receiver, Bluetooth, DAB+, Spotify & Amazon Alexa ready
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Kenwood KDC-BT460U Single DIN car stereo head unit CD/USB Receiver with Bluetooth technology for hands-free phone calls & music streaming.
Enjoy convenient control. Built-in Bluetooth technology for hands-free calls and music streaming and the ability to use your smartphone like a wireless remote control. The Digital Sound Processor, Time Alignment & 13-Band EQ ensures you of optimal sound tuning enhancements.
The Kenwood KDC-BT760DAB allows you to enjoy convenient control and crystal clear Digital Radio DAB+. Built-in Bluetooth technology for hands-free calls and music streaming gives the ability to use your smartphone like a wireless remote control and interactions with Amazon Alexa cloud-based voice service. Digital Sound Processor, Time Alignment & 13-Band EQ ensures allows you optimal sound tuning enhancements.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Kenwood KMM-BT408DAB allows you to enjoy convenient control and crystal clear Digital Radio DAB+. Built-in Bluetooth technology for hands-free calls and music streaming gives the ability to use your smartphone like a wireless remote control. Digital Sound Processor, Time Alignment & 13-Band EQ ensures allows you optimal sound tuning enhancements.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Pioneer DEH-S240BT is a single-DIN CD Player, Bluetooth, USB combined stereo, setting new standards in terms of audio performance and connectivity.
It’s very easy to use and control. Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone.
For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.
This Single DIN Bluetooth hands-free and DAB combined after market stereo is very easy to use and control. Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone.
For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
Pioneer DMH-A240BT Double DIN stereo head-unit with Bluetooth and Smartphone connectivity. Mechafree 6.2” Clear Resistive touchscreen multimedia player, with easy smartphone connectivity via a simple USB cable supporting Smartphone Mirroring, Bluetooth, 13-band GEQ, advanced audio features and premium audio quality.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The "Short Chassis" Double DIN Pioneer DMH-A340DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which allows you to mirror & control your smartphone from your dashboard in a convenient way. It plays DAB/ DAB+ Digital Radio and audio/video content from USB devices. Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Wifi-Enabled Pioneer SPH-EVO950DAB is a 9 inch touchscreen head unit with DAB+ Digital Radio, both Android Auto and Apple CarPlay, as well as features such as Spotify, Bluetooth streaming, WebLink, FLAC file playback and more. With the ‘floating’ or ‘tablet’ style installation the SPH-EVO950DAB modular receiver can be installed into many vehicle types, thanks to its unique universal installation capabilities.
A Single DIN radio cage is included with this head unit
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Pioneer FH-S820DAB double DIN car stereo head unit with Bluetooth and DAB
Double DIN car stereo head unit with DAB/DAB+, Bluetooth, Multi-colour illumination, USB input, Spotify and Pioneer Smart Sync app supported. Compatible with Apple and Android devices.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Pioneer MVH-S420BT sets new standards in terms of audio performance and connectivity. Nevertheless, it’s very easy to use and control thanks to its useful display and large Rotary Commander.
Bluetooth connectivity allows for safe and convenient hands-free calling, as well as wireless music streaming from your smartphone. You can even connect two Bluetooth phones simultaneously.
For smartphone users, simply connect your iPhone or Android smartphone wirelessly (via Bluetooth) and safely enjoy Spotify (both for Free and Premium Spotify users) or the Pioneer Smart Sync app, which will take your smartphone to a whole new level.
The Pioneer MVH-S520DAB is a Single DIN car stereo head unit back with lots of features including DAB/DAB+, Bluetooth, multi colour illumination, USB, Spotify, Pioneer Smart Sync App and is also compatible with Apple and Android devices.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Double DIN SPH-DA250DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, Android Auto, WebLink and Waze (Via the Apple CarPlay or Android Auto App) from your dashboard in a convenient and safe way. It plays DAB/DAB+ Digital Radio, audio/video content from USB devices.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
This Double DIN Pioneer AVH-Z5200DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, Android Auto, WebLink and Waze (Via Apple CarPlay or Android Auto) from your dashboard in a convenient and safe way. It plays DAB/DAB+ Digital Radio, audio/video content from CDs, DVDs and USB devices.
Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Pioneer AVH-Z7200 single DIN multimedia player with Carplay and 7 inch foldable display
Sony DSX-A510BD (Mechless) Single DIN car stereo head unit with DAB, Bluetooth, USB
Keep in touch on the road with Dual Bluetooth® connectivity from the DSX-A510BD. Wirelessly connect your first phone to play music, get directions and communicate with contacts. Add a second phone to make additional hands-free calls on the move.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Discover Sony's XAV-AX3250DB 7 Inch Touchscreen Double DIN head unit with CarPlay, Android Auto, DAB+ screen mirroring, DAB radio and works with compatible iPhone and Android smartphone. Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation, and leaves plenty of room for cabling and other accessories in the space behind the display.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Enjoy smooth and simple control for every journey with this Sony XAV-AX5650 head-unit (SLIM CHASSIS) with wired Carplay and Android Auto. Despite its double-DIN display, the rear chassis is far smaller than conventional double-DIN units. This makes for much easier installation, and leaves plenty of room for cabling and other accessories in the space behind the display.
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The Sony XAV-AX8050D head unit provides a large 8.95 inch display and smartphone connectivity all in a single DIN installation.
- 8.95-inch Large Display with “Antiglare” Clear and Fast Responsive Touchscreen
- Android Auto, Apple CarPlay and DAB+ Radio
- WebLink 2.0™ Cast
- 3-way Adjustable Display Mount for Flexible Installation
- Single DIN Rear Chassis Holds an Oversized LCD
- Rear View Camera Ready with Adjustable Parking Guide Lines
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
The MEX-N7300BD brings improved communication and illumination to any journey. Dual Bluetooth® lets you connect a second smartphone wirelessly, so you can make and receive hands-free calls from either phone. Tune into DAB+ radio for even more choice and better audio quality. The receiver picks up your DAB favourites too.
You need to have a suitable DAB aerial to receive DAB services on this radio, if required please use part number 70-923 (Sold separately)
PLEASE NOTE: All aftermarket head units usually require additional parts to be installed. Please check your vehicle listing before ordering
Provide a full sound upgrade to your Skoda front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.
This complete speaker fitting kit includes:
- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)
- 165mm Skoda speaker adapter panels (40-1163-165)
- Speaker adapter cables (41-031)
- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)
- 2 x Skinz expert sound deadening sheets
- Nut bolt and washer pack (SPK-FITTING)
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
Provide a full sound upgrade to your Skoda front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.
This complete speaker fitting kit includes:
- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)
- 165mm Skoda speaker adapter panels (40-1163-165)
- Speaker adapter cables (41-031)
- 2 x Y-Shaped component speaker cable harnesses (CAB-SFK-UNI)
- 2 x Skinz expert sound deadening sheets
- Nut bolt and washer pack (SPK-FITTING)
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
Provide a sound upgrade to your Skoda front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.
This kit allows you to fit a set of aftermarket 165mm speakers to your Skoda front or rear door panels (SPEAKERS NOT INCLUDED)
This speaker fitting kit includes:
- 165mm Skoda speaker adapter panels (40-1163-165)
- Speaker adapter cables (41-031)
PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY
Provide a sound upgrade to your VW, Skoda and Seat front doors with our 165mm (6.5 inch) speaker upgrade fitting kit.
This kit allows you to fit a set of aftermarket 165mm speakers to your VW, Skoda or Seat front door panels (SPEAKERS NOT INCLUDED)
This speaker fitting kit includes:
- 165mm VW speaker adapter panels (40-1033-165)
- Speaker adapter cable harness (41-009)
PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY
Provide a sound upgrade to your VW, Skoda and Seat front doors with our 165mm (6.5 inch) speaker upgrade fitting kit.
This kit allows you to fit a set of aftermarket 165mm speakers to your VW, Skoda or Seat front door panels (SPEAKERS NOT INCLUDED)
This speaker fitting kit includes:
- 165mm VW speaker adapter panels (40-1163-165)
- Speaker adapter cable harness (41-009)
PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themselves are NOT INCLUDED AND ARE SOLD SEPERATELY
Volkswagen 165mm (6.5 Inch) speaker replacement fitting kit
Easily replace Volkswagen front door speakers with our replacement 165mm (6.5 inch) speaker fitting kit. Ideal for replacing blown or water damaged speakers with an aftermarket entry-level OEM grade equivalent.
This replacement speaker fitting kit includes:
- Pair of 165mm 60W entry-level speakers (SPK-165D)
- 165mm VW speaker adapter panels (40-1033-165)
- VW speaker adapter cables (41-009)
PLEASE NOTE: These are entry-level original equipment style replacement speakers. Please see our complete speaker upgrade fitting kit solutions for more options
VW/ Skoda 165mm (6.5 Inch) complete speaker upgrade fitting kit
Provide a full sound upgrade to your VW or Skoda's front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.
This complete speaker fitting kit includes:
- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)
- 165mm VW speaker adapter panels (40-1033-165)
- Specially modified VW speaker adapter cable harness
- 2 x Skinz expert sound deadening sheets
- Nuts and bolt fixings
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
VW/ Skoda 165mm (6.5 Inch) complete speaker upgrade fitting kit
Provide a full sound upgrade to your VW or Skoda's front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.
This complete speaker fitting kit includes:
- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)
- 165mm VW speaker adapter panels (40-1033-165)
- Specially modified VW speaker adapter cable harness
- 2 x Skinz expert sound deadening sheets
- Nuts and bolt fixings
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
VW/ Skoda 165mm (6.5 Inch) complete speaker upgrade fitting kit
Provide a full sound upgrade to your VW Skoda or Seat's front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.
This complete speaker fitting kit includes:
- BLAM 165ES 165mm (6.5") EXPRESS 2-Way component speakers (BL-165ES)
- 165mm VW speaker adapter panels (40-1163-165)
- Specially modified VW speaker adapter cable harness
- 2 x Skinz expert sound deadening sheets
- Nuts and bolt fixings
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
VW/ Skoda 165mm (6.5 Inch) complete speaker upgrade fitting kit
Provide a full sound upgrade to your VW Skoda or Seat's front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.
This complete speaker fitting kit includes:
- 165mm (6.5 Inch) Hi-efficiency Blam 2-way component speakers (BL-165RS)
- 165mm VW speaker adapter panels (40-1163-165)
- Specially modified VW speaker adapter cable harness
- 2 x Skinz expert sound deadening sheets
- Nuts and bolt fixings
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
Provide a full sound upgrade to your VW or Skoda's front doors with our complete 165mm (6.5 inch)RECOIL coaxial speaker upgrade fitting kit.
Each fitting kit contains a set of Recoil Echo-Series RCX65 165mm (6.5 inch) 200 watt 2-way full-range coaxial speakers.
This complete speaker fitting kit includes:
- Recoil Echo-Series RCX65 165mm (6.5 inch) coaxial speakers (SPK-REC-RCX65)
- 165mm VW speaker adapter panels (40-1033-165)
- Speaker adapter cables (41-009)
Please see our compatibility list for a full list of cars that can benefit from this upgrade kit
Audi /VW / Seat / Skoda Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.
This cable has a flying lead for connection to an ignition supply. For a plug and play solution with CAN ignition use item 10-536-IGN
Audi /VW/ Seat/ Skoda Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.
Includes built in CAN BUS key in ignition interface for a complete plug and play solution. No extra connections are needed.
Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector.
Flying ignition for connection 12v Ignition
Handsfree ISO T hraness for VW cars made after 2010 with newer style inserts.
Flying ignition for connection 12v Ignition
Complete with full 24 through put wires to maintain the cars AUX functions,
Plug and play Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector.
Complete with through CAN ignition supply and through put wires to maintain the cars AUX functions
Female ISO Lead harness (with Butt Connectors)
Allows you to connect bare Power and speaker wires to the Female ISO connector.
Useful for repairs and custom installs
VW, Seat, Skoda cars with ISO style connectors in the car.
This cable reverses the power & ignition feed in the iso block
Cable to connect cars to an after-market European car radio with ISO style connectors.
VW, Seat, Skoda cars with ISO style connectors in the car.
This cable reverses the power & ignition feed in the ISO block to match those in the original car.
This cable comes with a 12v powered ISO to DIN antenna adapter supplied with the remote output removed from entering the vehicle where the K-Line (vehicle data) is connected in the car to protect the electronics in the vehicle.
Adapter cable to convert Volkswagen group cars with quadlock connectors to a standard ISO connector for fitting an aftermarket head unit.
A hardwired ignition needs to be supplied.
ISO adapter harness for Audi car models with quadlock connectors at the back of the radio.
This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting an aftermarket head unit.
Adapter cable to connect various Volkswagen Group cars and vans to standard ISO connectors to enable the fitting of an aftermarket head unit.
This adapter harness is designed to adapt from the original new style quad lock connector in the dashboard of various Volkswagen, Audi, Seat and Skoda vehicles to standard aftermarket ISO connectors to allow the fitting of a new radio.
Does not provide CAN ignition or steering wheel controls.
Adapter cable to convert Volkswagen Beetle Polo Caddy 2015 onward and Transporter T6 vans with quadlock connectors to a standard ISO connector for fitting an aftermarket head unit.
The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, installation is plug and play.
Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)
PLEASE NOTE: For a bulk pack of 10, please use 21-037B
DIN to ISO aerial antenna adapter
This adapter converts the cars existing DIN aerial plug to an aftermarket ISO type used by older model Alpine, Blaukpunt, Siemens, VDO and some other European radio manufacturers.
Suitable for Ford & Japanese cars that have a DIN original style antenna cable.
Can also be used to convert any DIN cables to ISO
PLEASE NOTE: For a bulk pack of 10, please use 21-101B
Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)
This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.
The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car.
PLEASE NOTE: For a bulk pack of 10, please use 21-123B
Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.
This antenna adapter cable adapts from the original Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
Double Fakra Aerial adapter cable for European cars that have twin non amplified original antennas.
Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)
This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
PLEASE NOTE: For a bulk pack of 10, please use 21-139B
Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.
This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.
This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.
Aerial adapter cable for European cars that have the double twin or double single Fakra connector and amplified original antennas.
Maintains cars antenna diversity. Only provides 12v power to the FM antenna not the AM antenna.
Recoil 2 Channel 80W adjustable high-to-low level subwoofer amplifier Line Output Converter (LOC) with a built-in amplifier remote trigger. This device is designed to convert 2 channels of speaker level audio into 2 channels of line level audio that can be used by car audio amplifiers.
This interface detects an audio signal and generates an amplifier turn on signal based on this, the amplifier turn on signal stays on for 60 seconds after the audio signal disappears. This allows the amplifier to stay turned on between tracks and during moments of silent audio.
Push fit 3.5mm stereo dash board socket with jack to jack for connection to car radio.
750mm cable length
Volkswagen Quadlock to 2x RCA phono sockets aux in adapter.
For Volkswagen radios that have a Quadlock connector and are aux in ready. The radio will either have an AUX button on the front or you will be able to activate an aux function through the menu.
Hard wired universal FM modulator interface to add an aux in to a cars existing FM radio system.
Universal CANBUS interface providing a single output.
This device provides a default IGNITION out for cars listed but can be programmed to change the dfault to Illumination, Speed pulse, Reverse gear or Handbrake.
Universal CANBUS interface providing two outputs.
This default output on this device is IGNITION & SPEED pluse but is can be programmed to change to , Illumination, Reverse gear or Handbrake or on selected vehicles amplifier wake up and parking sensor recovery.
Universal CANBUS interface providing two outputs.
This outputs on this device is 12v ignition and 12v illumination.
This product requires hardwiring to ta permanent live, ground, CAN High and CAN low and is intended for professional installers.
iPhone lightning to USB A charger and data cable
FLEXIBLE METAL JACKET
This camera cable is used in conjunction with a new Quadlock cable and allows you to retain the use of the original reverse camera when fitting an aftermarket head unit. Suitable for Volkswagen Transporter T6 vans/vehicles and Car with the MIB 2 system.
Retain original Camera on Volkswagen and Skoda cars with an RGB camera
This Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on various Volkswagen and Skoda vehicle models
PLEASE SEE LONG DESCRIPTION FOR FULL COMPATIBILITY
Retain original Camera on Highline Volkswagen, Seat and Skoda cars with Volkswagen RNS510, RNS315, RCD510, Seat Trinax and Skoda Bolero or Columbus head units.
This Camera interface runs from the original camera module, located elsewhere in the car to the back of the new radio.
Only for highline cars with moving guide lines and a white display in the Multi function display.
PLEASE SEE LONG DESCRIPTION FOR FULL COMPATIBILITY
Reverse camera to RGB video input interface for Skoda cars with Columbus Navigation system
Only for NTSC camera's
This interface allows you to add rear and front cameras to the OEM monitor of select Audi group cars with MIB2, Porsche cars with PCM 4.0 or PCM 4.1 and Volkswagen vehicles with composition Media or Discover Pro systems. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display. No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected.
Pioneer patch lead to be used with an In Car Tec 29-6xx or 29-7xx series steering wheel control interfaces.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 29-6XX or 29-7XX series steering wheel control interface, it will not work on its own.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.
Suitable for Audi A6 (00-04) & Seat Ibiza (02-08) car models with single wire K bus data.
Pioneer patch lead for 29-CT series steering controls
Suitable for Pioneer head-units that are steering wheel remote ready.
Can only be used with our 29-CT series steering wheel controls
Universal patch lead for 29-CT series steering controls
Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready.
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface includes CANbus ignition and positive reverse output for a camera feed, park brake signal (automatic cars only)
Suitable for Skoda Yeti (2014-2017) car models with the new 52 way Quadlock connector
PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.
PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description
UNICAN universal steering wheel control interface for cars with CANbus controlled steering wheel controls.
Also provides CANbus outputs such as ignition, illumination, speed pulse, handbrake and reverse gear.
PLEASE NOTE: This interface is for professional fit only and not recommended for DIY installation.
PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description
Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK) This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector. Comes supplied with 21-139 double fakra antenna adapter.
PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS
Patch lead for the UNICAN range of steering control interfaces for resistive programming head units and head units with loose wire learning SWC input.
To be used with non-branded and Chinese head units. Also for use with other brands of head units that have loose wires for steering control input with the feature to "learn" the steering controls.
PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own
Alpine specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit
PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own
Specific patch cable to connect a Unican interface to the the jack SWC socket on the back of the head-unit.
For JVC and Clarion car radios
PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own
Specific patch cable to connect a Unican interface to the SWC socket on the back of the head-unit.
For Kenwood and JVC car radios with either a single wire connection.
PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own
Specific patch cable to connect a Unican interface to the SWC socket on the back of the head-unit.
For Pioneer / Sony car radios with either a mini Din plug or a single wire connection.
PLEASE NOTE: This patch lead must be used with a 29-UC-Series steering wheel control interface, it will not work on its own
Complete (20mm2) 4 Gauge Amplifier Installation Kit
Kit contains
- 5 m power cable transparent-red
- 1 m power cable transparent-blue
- 5 m twisted RCA cable goldplated with remote
- 1 Mini ANL fuse holder
- 1 fuse 60 A
- 4 terminals
Amplifier wiring kit 10mm2 (8 Guage)
- 5 m power cable ECO red-transparent
- 1 m power cable ECO blue-transparent
- 5 m double shielded cinch cable with remote
- 1 ANL fuse holder gold-plated
- 1 fuse 40 A
- 2 eyelets 10 mm2, d = 8.5 mm
- 2 forks 10 mm2, d = 4 , 3 mm
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Suitable for fitting 165mm aftermarket speakers to the front doors on select Volkswagen group (2002 Onwards) vehicles.
Also fits Touran rear doors
Depth/ Thickness: 25mm
A pair of front or rear door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits various Seat and Skoda car models. Please see long description for compatibility and fitment details.
Depth/ Thickness: 40mm
A pair of front or rear door car speaker adapter panels for 200mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits various Seat and Skoda car models. Please see long description for compatibility and fitment details.
Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort.
These extra depth 70mm speaker panels are suitable for front doors on select VW & Skoda vehicles. Please see long description for compatibility and fitment details.
PLEASE NOTE: To be used with 41-009 speaker adapter cables or included with our custom fit speaker fitting kits
A pair of front or rear door car speaker adapter panels for 165mm speakers.
These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.
Fits various VW vehicle models. Please see long description for compatibility and fitment details.
Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers quickly and with little effort.
Suitable for various Volkswagen group vehicles including Skoda Octavia, VW Golf Mk6, Polo Mk V and earlier Amarok car models.
Also suitable on Volkswagen T6.1 front doors (minimises having to cut inner structure of door cards to stop after market speakers hitting the inside of the door card)
Speaker adapter cables; used to connect after market tweeters to the original loom on Skoda vehicles with Standard Audio.
Fits various Skodas built after 2013
Speaker adapter cables; used to connect after market tweeters to the original loom on Skoda vehicles with Canton Audio.
Fits various Skodas built after 2013
Speaker adapter cables; used to connect after market tweeters to the original loom on various Volkswagen, Skoda and Seat models.
Fits models built after 1996. Suitable for both front and rear tweeters. Pack contains a pair of cables (enough for two doors for example)
Speaker adapter cables; used to connect after market speakers to the original loom on various Skoda models.
Fits most models built after 2013 See long description
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Chinese, Xtrons, Eonon or unbranded stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.
For programmable 3.5mm aftermarket head units please use this with 20-3.5-SWC
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Alpine stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Clarion stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket JVC stereo with a single wire steering control input.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Kenwood stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.
Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Sony stereo.
PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.
Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces.
Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.
NOT COMPATIBLE WITH CHINESE 2WIRE SWC HEAD-UNITS use 49-000 for these
PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.
PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description
Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION ON THE NEW RADIO
PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-VW-DMX02, FK-699-VW-ILX) TO ACHIEVE THIS
PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description
Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK) This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector
Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
Fits various Volkswagen, Seat and Skoda cars models
A removable pocket is included for Single DIN installation.
COLOUR: MATT BLACK
PLEASE NOTE: For double din installation the central bar of the fascia needs to be cut out
Replacement FLUSH FIT car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
This FLUSH FIT fascia makes it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish
Fits various Volkswagen, Seat and Skoda car models
A removable pocket is included for Single DIN installation.
COLOUR: MATT BLACK
Replacement FLUSH FIT car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
This FLUSH FIT fascia makes it easier to adjust the fascia to the new aftermarket radio, making for a more professional finish
Fits various Volkswagen, Seat and Skoda car models
A removable pocket is included for Single DIN installation.
COLOUR: GLOSS BLACK
Fits Skoda Octavia (2004-2013) and Yeti (2009-2017) car models
COLOUR: MATT BLACK
PLEASE NOTE: For Double DIN installation please use part number 50-713
Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
A pocket is provided for Single DIN installation. If using for Double DIN installation then you will need to cut the central bar of the fascia.
COLOUR: MATT BLACK
PLEASE NOTE: IF A CAGE IS NOT INCLUDED WITH YOUR AFTERMARKET UNIT, YOU WILL REQUIRE A CAGE, ITEM NUMBER 51-013
Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
The fascia uses the cage supplied with a single DIN radio to fit.
Fits Volkswagen Up! (2017 >), Skoda Citigo (2020 >) and Seat Mii (2020 >) car models
COLOUR: GLOSS BLACK
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version.
Fits Seat Mii (2011 - 2019), Skoda Citigo (2011 - 2019) and Volkswagen Up! (2011 - 2016)
Only for cars with glovebox lid and manual climate controls.
Professional Installation Recommended
COLOUR: GLOSS BLACK
172mm x 98mm. Volkswagen and Skoda Car radio fascia adapter panel to allow the fitting of an aftermarket Double Din Car stereo upgrade.
This fascia is a black flush fit adapter panel.
Suitable for fitting various Volkswagen and Skoda cars.
PLEASE NOTE: Some branded and other unbranded CHINESE Head Units vary in size and will not fit. Please check the dimensions of your Head Unit and compare to our flush fit dimensions (172mm x 98mm)
172mm x 98mm. Skoda Car radio fascia adapter panel to allow the fitting of an aftermarket Double Din Car stereo upgrade.
This fascia is a black flush fit adapter panel.
Suitable for fitting Skoda Fabia, Roomster, Superb and Yeti.
PLEASE NOTE: Some branded and other unbranded CHINESE Head Units vary in size and will not fit. Please check the dimensions of your Head Unit and compare to our flush fit dimensions (172mm x 98mm)
172mm x 98mm. Skoda Car radio fascia adapter panel to allow the fitting of an aftermarket Double din Car stereo upgrade.
This fascia is a Black adapter panel.
Suitable for fitting Skoda Fabia, Octavia and Roomster.
Fits Skoda Octavia (2007-2013) and Skoda Yeti (2009-2017) car models
COLOUR: MATT BLACK
PLEASE NOTE: For Single din installation please use 50-234
Volkswagen, Seat and Skoda car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN stereo upgrade.
The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.
The fascia adapter panel takes a 113mm high cage, this is the size of cages supplied with all the major brand head unit manufactures. If a cage is needed, we sell a matching cage with part number 51-013.
Suitable for fitting various Volkswagen, Seat and Skoda cars.
COLOUR: MATT BLACK
This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.
The fascia is designed to fit Skoda Rapid (2013 Onwards) car models.
COLOUR: MATT BLACK
This fascia comes complete with the adapter panel (50-714) needed to fit an aftermarket double DIN head unit.
The fascia is designed to fit Skoda Yeti (2014 Onwards) car models with Automatic Air Con
COLOUR: MATT BLACK
Car audio metal cage kit and trim 113mm high.
Needed for aftermarket head-units that do not come with cage kits.
Interior windscreen glass mount DAB radio antenna aerial suitable for aftermarket DAB car radios.
Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.
PLEASE NOTE: For a bulk pack of 5, please use 70-923B
Interior windscreen glass mount DAB radio antenna aerial suitable for aftermarket DAB car radios.
Consists of a 3m cable terminated with female SMB right angle connector and a 'sticky-back' peel to easily stick to the vehicles windscreen.
PLEASE NOTE: For a bulk pack of 5, please use 70-923B
DIN to DAB & FM antenna aerial amplifier splitter/ radio distributor.
This top quality OEM German made splitter amplifies the existing FM signal and extracts from it a DAB signal, splitting the existing FM antenna into both FM and DAB.
PLEASE NOTE: This product is designed to be used in cars with passive or non amplified antennas
For a bulk pack of 5, please use 70-928B
Panel clips normally found on the back of original car audio facias.
10 pcs per pack
M5 x 60mm male threaded bolts for use as extra long radio support bolts.
These bolt screw into the back of the standard Din or Double Din radio. They then help support the new radio by locating into the OEM support slot in the car
10 pcs per pack
Pack of 10 perforated galvanised metal strips. Ideal for use when custom mounting devices or units into cars.
Momentary panel mount rocker switch. Push and hold to activate the switch, springs back to original position on release. 19mm hole diameter.
ON/OFF panel mount toggle rocker switch. 19mm hole diameter.
100m roll of Automotive spec speaker cable.
2 x 24/02 copper Figure 8 speaker cable
Black , Black Red
100m roll of automotive spec thinwall cable.
24/02 copper BLACK
0.75mm2 , 14 amp
100m roll of automotive spec thinwall cable.
24/02 copper BLUE
0.75mm2 , 14 amp
100m roll of automotive spec thinwall cable.
24/02 copper Red
0.75mm2 , 14 amp
100m roll of automotive spec thinwall cable.
24/02 copper YELLOW
0.75mm2 , 14 amp
50m roll of automotive specification thinwall cable.
28/03 copper BLACK
2.00 mm2 , 25 amp
50m roll of automotive spec thinwall cable.
28/03 copper Red
2.0mm2 , 25 amp
Ideal for -12V GROUND cable on active under-seat sub-woofer boxes
30m roll of automotive spec thinwall cable.
44/03 copper BLACK
3.0mm2 , 40 amp
Ideal for -12V GROUND cable on active under-seat sub-woofer boxes
30m roll of automotive spec thinwall cable.
44/03 copper RED
3.0mm2 , 40 amp
30m roll of automotive spec thinwall cable.
56/03 copper BLACK
4.0mm2 , 40 amp
30m roll of automotive spec thinwall cable.
56/03 copper Red
4.0mm2 , 40 amp
30m roll of automotive spec thinwall cable.
84/03 copper BLACK
6.0mm2 , 50 amp
30m roll of automotive spec thinwall cable.
84/03 copper Red
6.0mm2 , 50 amp
In-Line standard (ATO, ATC, APR) blade fuse holder.
Black 10pcs
(picture shows 2 pcs clipped together)
In-Line standard (ATO, ATC, APR) blade fuse holder.
Black 100pcs
(picture shows 2pcs clipped together)
These packs of 10 water resistant ATC/ATO 10/15 AMP Inline Fuse Holders are great for hardwiring accessories into the fuse box.
Made with heavy duty 16 AWG wire and a tight-fitting water resistant lid, these holders are great for locating fuses in areas where dust, moisture or water ingress could cause problems, meaning they can withstand the harshest of environments both off-road and offshore.
5 Pin Relay Holder (12v 80amp)
Terminates in bare wires, approximately 300mm in length and 12awg.
High-quality Mini ANL and ATC Fuse holder for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 High-quality Mini ANL and ATC Fuse holders for 20mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual Mini ANL and ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 20mm² cable and can handle up to 150 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Bulk pack of 5 high-quality Dual ATC Fuse holders for 10mm ² cable.
Make replacing fuses in the field a quick and simple process with these high-quality dual ATC fuse holders.
The Water resistant cover combined with the silicone grommet and gasket means they can withstand the harsh conditions of offshore and off-road environments, making them ideal for use in water sports and marine audio systems.
The holders are capable of fitting 6,8 and 10 AWG wire and can handle up to 80 Amp fuses. Easily secure fuses and cables with the included Allen key, making for a more flexible and secure installation.
Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 50 X-tra Thick T-Grip Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
Pack of 100 X-tra Thick Nitrile (powder-free) disposable gloves
These powder-free ambidextrous nitrile gloves are ideal for people with latex allergies and have been designed to suit both mechanical, engineering and general everyday use. Nitrile gloves offer a better resistance to oils, acids and most other household chemicals than latex gloves, making them ideal for use in a wide variety of mechanical environments including garages and workshops. Extra strong, dependable, tear and chemical resistant, these gloves are super flexible with a textured grip for additional comfort and dexterity, even during extended use.
PLEASE NOTE: Sold individually, colours and fragrances can vary
Auto Shine Car Air Freshener Extra Long Lasting Fresh Scent
Auto shine air fresheners add a pleasant fragrance, refreshing the environment while removing unpleasant smells. Their long lasting fragrance can be used in your car, boat or home.
Digital Multimeter (500V AC/DC Manual Ranging)
A small, low cost multimeter, a useful tool for testing and finding issues with car electrics and audio systems, and an essential tool for amateurs as well as professionals.
Comes with test probes. Requires a 9V PP3 battery - not included.
20mm HSS hole saw cutter drill bit.
Made from High Density Steel, this hole saw can be used to cut 20mm holes, such as those needed when fitting our CA-9401.V2 reversing cameras.
A must have for any installer who has to remove plastic trim.
4 Pack of Panel tools to help remove dashboard trim panels.
Flat end and forked end.
Bright orange design makes it easy to find when working in a car.
Full professional 13 piece set of trim removal tools and pry bars for removing plastic trim without damage
13 Pack of Panel tools to help remove dashboard trim panels.
A selection of forked, flat and wedge ends, with two solid pry bars.
Supplied in a black carrying case
The semi-professional set is a must have for any installer who has to remove plastic trim.
6 Pack of Panel tools to help remove dashboard trim panels.
A selection of forked, flat and wedge ends.
Cable cutter and crimping tool for a variety of non-insulated and insulated terminals. 1.5-6.0mm.
Tool length, 25cm.
Crimping tool for a variety of non-insulated open end terminals. 0.5-2.5mm.
Tool length, 21cm.
Pioneer GM-D1004 400W Class FD 4-Channel amplifier with TVC concept and input sensor.
The GM-D1004 is a compact amplifier that can easily be installed behind the dashboard of your car. Power can be taken from the console panel thanks to its protection control system, which suppresses excess current during large output. Additionally, it prevents extreme overheating of parts and maintains stable operations.
Recoil’s REA600.4 is a powerful, efficient, and highly reliable four channel class A/B full-range amplifier. Capable of powering an entire aftermarket upgraded speaker system in a vehicle, it packs the power that will allow you to be loud and let your speakers come alive. Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end.
• Class A/B 4-Channel Amplifier
• RMS Power at 2 Ohms: 130 Watts x 4 Channels (14.4v)
• RMS Power at 4 Ohms: 95 Watts x 4 Channels (14.4v)
• RMS Power at 4 Ohms (Bridged): 260 Watts x 2 Channels (14.4v)
Discover the Express 165 EC from BLAM, an efficient 6.5" (16.5cm) coaxial system with 2 O impedance. This high-quality set consists of two 165 mm woofers, coaxially mounted 20 mm soft dome tweeters and integrated 6 dB/octave high-pass crossovers. You will be impressed by the maximum output of 120 W and the rated output of 60 W. In addition, the system offers an impressive frequency range of 65 Hz - 31 kHz and a sensitivity of 93.5 dB. Whether woofer or tweeter, each element is carefully designed and equipped with special features to deliver the best possible acoustic performance.
Discover the Express 165 ES from BLAM, a high-class speaker set that stands for impressive sound quality. With its 6.5" (16.5cm) front system set, this 2-way model guarantees a maximum output of 120W and a nominal output of 60W. It impresses with its high sensitivity and an amazingly wide frequency range from 65 Hz to 31 kHz. The set includes two 165 mm woofers, two 20 mm soft dome tweeters and two separate crossovers with high-pass 6dB filtering, ensuring the optimum listening experience.
This kit is composed of two 165 mm (6.5”) woofers, two 20 mm (3/4”) soft dome tweeters and two separated high pass 6dB/octave crossovers
The RELAX 165R2C from BLAM is a high-quality 6.5" (16.5cm) coaxial system that is characterized by its technical features and sophisticated design. With a maximum output of 150 W and a nominal output of 75 W, this system guarantees a clear and balanced sound. Its frequency response ranges from 60 Hz to 25 kHz and its sensitivity is 95 dB. The Relax 165 R2C contains 2 x 165mm woofers, 2 x 20mm coaxially mounted soft dome tweeters, and integrated crossovers with 6 dB per octave. A product with remarkable acoustic performance and high quality materials to meet your high demands.
Immerse yourself in the world of optimum sound with the Relax 165 RS 165mm (6.5 inch) speaker set from BLAM. The high-quality components are impressive, including 165 mm woofers, 20 mm soft-dome tweeters and adjustable crossovers for a customizable sound experience. With a maximum output of 150 W and a frequency response of 60 Hz to 25 kHz, this set ensures authentic, room-filling sound. Another highlight is the durable construction with glass fiber reinforced composite material and treated cellulose pulp. Experience the perfect symbiosis of technology and design in this unique speaker set.
The BLAM RELAX CRS27A is designed to fit inside the spare wheel well of most vehicles with the spare wheel mounted under the false floor of the boot. This works well in hatchbacks, SUVs, people carriers and wagons which don't have the luggage compartment sealed away from the passenger compartment, giving solid base kick, without being overbearing and not taking up space in the cargo area on under the seats. Mounted in a die cast aluminium enclosure with a 300w integrated amplifier this subwoofer creates a powerful, dynamic and enjoyable listening experience. An external remote with level control, base boost and phase is included with a 300mm extension.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE L20 DB from BLAM is an impressive 8" (20cm) Dual Voice Coil subwoofer that stands out with its special combination of high-quality features. Crafted in a robust aluminium basket, it features a treated paper cone, a foam surround and a durable "Conex "-Spider. Thanks to its double magnet motor and its optimized adaptation to 10 L to 25 L closed enclosures, it offers remarkable sound quality. With a maximum power of 500 W and a high sensitivity of 89 dB, the LIVE L20 DB reproduces low frequencies with high efficiency and volume, making it a first-class addition to any car audio setup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE L25 DB 10 inch (250 mm) Dual Voice Coil subwoofer from BLAM brings musical perfection into the car audio system. By using advanced technology and high-quality materials such as an aluminium basket, a specially treated paper membrane and a foam suspension, this subwoofer offers first-class sound quality. In addition, it has a 60mm dual voice coil and a magnetic dual motor for increased performance. Optimization for use in 15 to 45 L closed enclosures enables a wide range of applications and ensures both deep and precise bass sound, making it a first-class addition to any car audio setup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Discover the LIVE L30 DB subwoofer from BLAM, a 12 Inch (300mm) subwoofer for a rich car audio experience. This model features a special construction with an aluminium basket, treated paper cone and foam suspension for long-lasting sound quality. Equipped with a 60 mm double voice coil on an aluminium carrier and a double magnet motor, this subwoofer is optimized for closed cabinets between 20 L and 50 L. With a maximum output of 800 W and a frequency response of 45Hz-500Hz, the L30 DB is an impressive addition to any sound system.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Discover the LIVE LA 1000 from BLAM, a 1-channel (Monoblock) amplifier known for its robust build quality and sleek design. With a monumental power reserve, this Class-D amplifier ensures effortless transmission of music in its finest details, especially bass and low frequencies. Thanks to its large radiating surface, it offers optimal cooling, stability and performance. With a cabled remote control included, the LIVE LA 1000 is a perfect symbiosis of aesthetic design and technical performance.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE LA500 500W Class D Monoblock amplifier from BLAM has been developed to take into account all of the manufacturers parameters. The result is a monumental 1-Channel amplifier that transmits natural music in great detail. Bass and extreme bass are faithfully reproduced with impressive force and due to their large volume have a large dissipation surface which ensures their cooling, stability and performance. With a peak power of 500W, the LA500 benefits from a strong, robust design and a high-end finish to match.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE LSP20 from BLAM is an 8 Inch (200mm) subwoofer that takes your audio experience to the next level. Equipped with a power output of up to 500W and a frequency response of 35 to 500 Hz, this robust subwoofer delivers impressive audio detail that enriches any sound system. Special features such as an injected polypropylene cone, a steel basket and a 50 mm (2") dual voice coil make it the perfect addition for any sound enthusiast. It is ideally optimized for closed cabinets from 10 to 25 litres.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
Immerse yourself in the world of outstanding bass performance with the LIVE LSP25, a 10-inch subwoofer from the renowned manufacturer BLAM. With a maximum output of 600 W and a rated output of 300 W you can expect powerful bass with every song. This is complemented by precise components such as the injected polypropylene cone and a 60 mm dual voice coil on an aluminium carrier. The LSP25 is optimized for use in a closed cabinet that varies from 15 to 45 litres, bringing the impressive bass directly to your home.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The LIVE LSP68 DSP amplifier from BLAM offers the best performance you can get from your cars audio system with high-quality audio processing technology. With 6 channel input and 8 channel output, the BLAM LSP68 DSP offers detailed sound adjustment. With time alignment, phase adjustment and multiple EQ bands, you can provide a perfect listening experience for every seat. Thanks to its special software and easy to use interface you can fine-tune your sound settings according to your personal preferences. Easily control volume, EQ settings, crossover frequencies and more.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The RELAX MSA20 20 cm extra-slim subwoofer with integrated 240 W amplifier from BLAM makes it easy to improve the quality of your original audio installation by adding bass without reducing too much space in the vehicle. At a height of only 65mm (66mm with Grill) the MSA20 slim design allows for easy installation in multiple locations throughout the vehicle. It fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The RELAX MSA 25 P 25cm extra-slim subwoofer with integrated 360 W amplifier from BLAM makes it easy to improve the quality of your original audio installation by adding bass without reducing too much space in the vehicle. At a height of only 68mm (78mm with Grill) the MSA 25 P slim design allows for easy installation in multiple locations throughout the vehicle. It fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup.
PLEASE NOTE: This is a special product order which we don't stock. Please email our sales team for availability
The RELAX MSP 25P extra-slim subwoofer from BLAM makes it easy to improve the quality of your original audio installation by adding bass without reducing too much space in the vehicle. At a height of only 68mm (78mm with Grill) the MSP 25P slim design allows for easy installation in multiple locations throughout the vehicle. It fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup.
We recommend using this with the BLAM RA 251D mono amplifier (BL-RA251D)
The RELAX R12 from BLAM, a 12 Inch (300mm) subwoofer sets new standards in terms of sound quality and performance. This technical masterpiece is specially designed to offer you a unique listening experience. With excellent technical data such as a maximum output of 500 W and a sensitivity of 94 dB, the RELAX R12 is impressive across the board. It's about a sound experience that is achieved by a reinforced cellulose fiber cone and a 50 mm voice coil on an aluminium carrier. With an impedance of 2 O and a frequency response of 30 Hz to 500 Hz, the subwoofer gives you the full range of sound you want and deserve.
The Relax R8EL is a high-performance 8" (210mm) subwoofer from BLAM. Designed for compact enclosures, this 2 ohm subwoofer offers an impressive maximum power of 300W. With features such as steel basket, treated pulp cone and butyl rubber surround , this subwoofer is unique in its field. It also stands out from others thanks to its 40 mm voice coil on a fiberglass support and an optimal operating volume of 10 to 13 litres in a bass reflex housing. The R8EL from Blam is perfect for audiophiles who value focus on quality and performance. Combined with a BLAM amplifier, this subwoofer creates a powerful, dynamic and enjoyable listening experience.
Discover the RELAX RA 1202 D amplifier from BLAM, the perfect solution for demanding car audio fanatics. This powerful, robust and compact 2-channel amplifier offers outstanding audio performance thanks to modern technology. Despite its compact design, the amplifier is capable of delivering impressive dynamics and performance without any dropouts. Thanks to its high efficiency, it will provide the power required to reproduce the full dynamics of your favourite recording combined with unheard of reliability. The RA 1202 D amplifier delivers impressive sound quality and meets even the highest demands.
The super-slim RELAX RS10.4 10 inch subwoofer from BLAM will serve as a low-frequency foundation that will provide your system with ultra-low frequency range. At an installation mounting depth of just 66mm, this speaker is specially designed for extremely compact housings to take up minimal space in your vehicle. With a maximum output of 300W, an impedance of 4 O and a frequency response of 35 Hz to 500 Hz, this extra-slim subwoofer gives you the full range of sound you want and deserve.
This universal reversing camera is designed to be used on any 12v vehicle. it's clever adjustable butterfly bracket design allows for it to be discretely mounted at the rear of any vehicle (normally next to the rear number plate lights).
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
UK & European car number plate/ registration plate frame with built in rear view camera.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: On most cars you will need to drill a hole to pass the cable into the vehicle
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the tailgate handle on the vehicle.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the tailgate handle on the vehicle.
Mounting bracket for various Audi and Volkswagen cars to fit the CA-801 tailgate handle rear view
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the tailgate handle on the vehicle.
Special rear view camera specially designed for various Audi A5, Q2, Q5 Skoda Kodiaq and VW T-Cross (2017 Onwards) car models.
This camera secures into the place of the original tailgate handle housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with fixed parking guidelines which can be enabled or disabled.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the tailgate handle on the vehicle.
Rear view reversing camera for Skoda Karoq, Kodiak (2017 Onwards) car models.
The camera is mounted in place of the original trunk/boot lid handle. It is also equipped with dynamic parking guidelines function (which can be disabled)
PLEASE NOTE: The water line fixing point on the back of the housing is for cars with existing rear camera lens washer facility. This can be ignored if the car does not have this feature.
Please check that the image of the camera matches the existing number plate light on the vehicle.
Universal push fit reversing camera designed to be used on any vehicle with a 12v feed, with the camera having a built in 6 volt adapter.
It's clever 20.5mm push fit design means it fits perfectly on any under-hang surface like just above a car number plate.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
Universal push fit reversing camera designed to be used on any vehicle with a 12v feed, with the camera having a built in 6 volt adapter.
It's clever 20.5mm push fit design means it fits perfectly on any under-hang surface like just above a car number plate.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
Special rear view camera specially designed for various Audi and Skoda car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled. The camera has built in LEDs to replace the original bulb.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Special rear view camera specially designed for Skoda Fabia MK2, Superb B6 and Yeti 5L car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled. The camera has built in LEDs to replace the original bulb.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Special rear view camera specially designed for various Audi, Seat Arona, Skoda and Volkswagen car models.
This camera secures into the place of the rear number plate light housing on the back of the vehicle and provides additional visual safety to the back of the vehicle, whilst still maintaining it's original appearance.
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: Please check that the image and dimensions of the camera matches the existing dimensions of the brake light housing on the vehicle.
Reverse view camera for various Seat, Skoda and VW cars to fit in place of the rear number plate light.
Reverse view camera for various Skoda cars to fit in place of the rear number plate light.
Reverse view camera for Skoda Fabia, Yeti and Volkswagen Golf VI Estate to fit in place of the rear number plate light.
Universal metal body fixed screw thread camera.
Includes options for Parking lines or Mirror image so can be used as as either a front or rear view camera
Fitment is via a fixed screw thread, meaning it can be fixed in various positions such as on the under hang of a vehicle.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
This universal reversing camera is designed to be used on any 12v vehicle. it's clever adjustable bracket design allows for it to be discretely mounted at the rear of any vehicle (normally next to the rear number plate lights).
This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.
PLEASE NOTE: This item is classed as “universal fitment”. This means it has been designed to work universally with a range of vehicle applications but does not necessarily mean it will fit your application. Please check all size information and product content before purchasing
Reverse view camera for various Volkswagen, Seat and Skoda cars to fit in place of the rear number plate light.
Whilst we do our best to make sure our product compatibility listings are as accurate as possible, there may still be exceptions. Different vehicle shapes, such as saloon, estate, coupe, may require different number plate cameras. Please check that the image of the camera matches the existing number plate light on the vehicle.
Multimedia Steering wheel control interface for various VW cars with select Kenwood models with the UART connector.
This interface is compatible with the newer style (2 PIN) Quadlock connector usually found on p model variants of some Volkswagen vehicles.
Includes a pre-wired CANbus interface to provide Ignition, Illumination, Steering controls, Reverse signal, Park Pilot screen retention, Climate control display if in car
PLEASE NOTE: Only compatible with select Kenwood models with the UART connector. These include Kenwood DMX8020DABS, DNX516DABS and DNX518DABS
Multimedia Steering wheel control interface for various VW cars with Pioneer AVIC- navigation models with the UART connector
PLEASE NOTE: Only compatible with Pioneer AVIC models
PDC display and Steering wheel control interface for various VW cars with Pioneer AVIC- navigation models with the UART connection
PLEASE NOTE: Only compatible with Pioneer AVIC- models
Although you may need cables to fit a Single DIN aftermarket unit to your vehicle there is no fascia needed, as long as your new car radio comes complete with a Single DIN cage kit and ISO trim.
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
An additional mounting adapter is needed.
Replacement rear view mirror with a built in monitor for reverse camera and video input.
When not using the video input the mirror works as normal.
This monitor comes with a universal window mount (M-K06) which securely attaches the monitor to the vehicles windscreen
The M-738 is a 7 inch Mirror Monitor designed to easily clip on to the vehicles existing rear view mirror. The 7" TFT panel gives a nice large high resolution colour image. It is thin in thickness but sturdily built. It uses standard phono connectors for the camera and is perfectly suited for cars, small/large vans, HGV’s and transport vehicles reversing systems. It runs on 12 volts only and the camera used with the monitor is usually powered off the reversing light. The monitor clips neatly on the interior mirror giving a discrete rear view system. It has 2 AV channels and channel 2 can be set to come on automatically when reverse is selected.
Clip over rear view mirror monitor for reverse came display.
5 inch display screen.
5 inch standalone windscreen video monitor with suction mount bracket.
These monitors are great to use when installing an aftermarket reverse camera without having to affect the original factory fitted system.
Can be powered from 12v ignition or reverse feed.
Rear view window mount Monitor designed to fit instead of the rear view mirror in panel vans. A self adhesive fixing pad is attached to the windscreen and then the monitor is attached to this.
Includes a cable cover. 2 video inputs. NTSC/PAL auto switch
Pioneer's AVIC-Z7330DAB not only includes detailed built-in European HERE navigation maps, it now takes smartphone connectivity to a whole new level, thanks to built-in Wi-Fi. Forget messy cables hanging across your dashboard, enjoy Apple CarPlay wireless, the Pioneer way. Waze (via Apple CarPlay and Wireless Mirroring) and WebLink can also be enjoyed from modern smartphones, as well as DAB+ radio and wireless Bluetooth.
PLEASE NOTE: No metal cage is supplied with this kit. use 51-012 or 51-013 if you are using a fascia that requires a cage
Although we may have cables to fit the Double Din unit to your car there is either no fascia conversion kit available, it is impossible to do or you will need professional engineers to adapt your dashboard.
As this car has ISO connectors as standard you do not need an adapter T cable as it should have been supplied with the hands-free kit
Car Audio Battery / Power cable
8 AWG
Length: 50 metres
Colour: Red
Multicore speaker cable
1mm2 (18 AWG) Color Coded Car Speaker Cable.
Eight Speaker Leads and one Remote Turn-on Lead
Easy Peel Jacket without Cutting Through Inner Wire Jacket.
EIA Standard Color-coded for Quick and Easy Installation
High-Strand for Increased Sound Transfer
6 Metre Length is Ideal for 4-Speaker to Amplifier Installation
Save Installation Time - Only One Cable to Run.Ultra-Flex Outer Jacket for Maximum Flexibility
Length: 6 Metres
Pack of nuts, bolts, washers and terminals for fitting a pair of speakers and speaker rings.
Contains the following
12x M5 Bolts
12x M5 Flanged Nuts
8x M5 Stainless Steel Washers
4x 2.8mm Insulated Spade Terminals
4x 4.8mm Insulated Spade Terminals
A pair of speaker grilles with removable mesh for 100mm (4 inch) speakers
A pair of speaker grilles with removable mesh for 130mm (5 inch) speakers
A pair of Speaker grilles with removable mesh for 165mm (6.5 inch) speakers
A pair of Speaker grilles with removable mesh for 6 inch by 9 inch (6x9) speakers
Recoil Echo-Series REM65 165mm (6.5 inch) 200 watt component speaker system (PAIR)
The compact PWE-S8 amplified subwoofer system lets you add deep, accurate bass to your sound system without taking up much space in your vehicle.
With the PWE-S8, the high-excursion 8-inch subwoofer and 120W (RMS) gives strong bass output.
With a shallow mount, the PWE-S8 is just 3-inches deep (at deepest point), 13.5-inches wide and 9-inches tall - completely application ready. This compact subwoofer system works well under or behind the seat of a pickup truck, in a sedan trunk, or in the hatch of an SUV.
The side panel offers easy access to RCA and auto-sensing speaker inputs. The side panel also gives access to Phase, Gain, LP Crossover and Remote Sub Level controls for greater flexibility during installation.
Choosing a bass box can be hard as not many people sell them and ideally they need to be built by people who know subwoofer parameters, box design and understand how sound waves travel. Not to mention, have joinery knowledge.
Made from high density 18mm MDF, these subwoofer boxes are expertly designed for enhanced durability and simultaneously provide great bass performance in your vehicle.
Its 36.8 Litre capacity allows you to add a 10 inch subwoofer to your vehicles original sound set up without taking up too much valuable space in your vehicle.
PLEASE NOTE: We recommend to pair this enclosure with one of our 10 inch BLAM subwoofers, such as a BL-LSP25 or BL-L25DB
Choosing a bass box can be hard as not many people sell them and ideally they need to be built by people who know subwoofer parameters, box design and understand how sound waves travel. Not to mention, have joinery knowledge.
Made from high density 18mm MDF, these subwoofer boxes are expertly designed for enhanced durability and simultaneously provide great bass performance in your vehicle.
Its 48.82 Litre capacity allows you to add a 12 inch subwoofer to your vehicles original sound set up without taking up too much valuable space in your vehicle.
PLEASE NOTE: We recommend to pair this enclosure with one of our 10 inch BLAM subwoofers, such as a BL-R12 or BL-L30DB
Choosing a bass box can be hard as not many people sell them and ideally they need to be built by people who know subwoofer parameters, box design and understand how sound waves travel. Not to mention, have joinery knowledge.
Made from high density 18mm MDF, these subwoofer boxes are expertly designed for enhanced durability and simultaneously provide great bass performance in your vehicle.
Its 8 Inch slot allows you to add an 8 inch subwoofer to your vehicles original sound set up without taking up too much valuable space in your vehicle.
PLEASE NOTE: We recommend to pair this enclosure with one of our 8 inch BLAM subwoofers, such as a BL-R8EL, BL-LSP20 or BL-L20DB
The ultra compact Pioneer TS-WX140DA amplified space saving subwoofer lets you add strong and rich bass to your sound system without taking up much space in your vehicle.
TS-WX140DA is a small active subwoofer in a sealed enclosure, delivering 170 W Maximum power and 50 W Nominal Power.
The ultra-compact casing of this subwoofer is only 280mm x 200mm x 70mm. This works well under or behind the seat of a car or truck, or behind the seats of a sports car or pickup truck,
Thanks to the inclusion of Class-D technology, Pioneer’s TS-WX140DA is even easier to install, as it is capable of taking both High (Speaker Line Input) and Low (RCA Line Input) input signals.
The Recoil SW10P is a universal all-in-one self-contained 10-inch subwoofer enclosure with a built-in 600W amplifier and 10-inch passive radiator., If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one makes this ideal for spatially challenged vehicles. The system includes a built-in amplifier meaning there is no need for an external amplifier and its adjustable gain control allows you to match it to the vehicles original system, allowing all the speakers to complement each other.
PLEASE NOTE: An installation wiring kit is included with this product, please read the long description for more information
PLEASE NOTE: An installation wiring kit is included with this product, part number 33-109
This compact 10-inch (250mm) amplified subwoofer is an all in one system, allowing you to add deep, accurate bass to your vehicles original sound set up without taking up too much valuable space. Its high quality craftsmanship and slim design mean it fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup. The system includes a built-in class-AB amplifier meaning there is no need for an external amplifier and its adjustable gain control allows you to match it to the vehicles original system, allowing all the speakers to complement each other.
PLEASE NOTE: An installation wiring kit is included with this product, part number 33-109
The SL1789 compact 8-inch (200mm) amplified subwoofer from RECOIL is an all in one system, allowing you to add deep, accurate bass to your vehicles original sound set up without taking up too much valuable space. Its high quality craftsmanship and slim design mean it fits perfectly under the seats of a van or SUV, or even on the rear bulkhead of a convertible or pickup. With 2 x built-in passive radiators and an included remote control, the SL1789 allows you to change the amount of bass without changing the radio volume allowing the perfect mixture of bass in your music at any volume.