PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface allows the use of the Steering Wheel audio controls, select vehicle settings, Optical Parking Sensor Display And Climate Control Visualization when installing an aftermarket head unit.

Suitable for select Volkswagen VW Golf 2012-2018 (Non Amplified) and Polo (2012-2018) car models with MIB Composition Units.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Car Audio Steering wheel interface and ISO cable harness allowing you to retain the use of the standard steering wheel audio controls (volume, seek, source and mute) when installing an aftermarket head unit.

Suitable for Landrover Freelander II (L359) (2006-2014) car models with standard factory radio and standard audio systems without top screen navigation.

PLEASE NOTE: For vehicles with factory parking sensors please use 29-658-PDC, for vehicles with Alpine audio please use 29-713

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable designed for select Hyundai ix35 (2010-2015) vehicles with amplified audio systems (ISO connections behind the radio)

Allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. 

This interface also retains the OEM amplifier and fader menu, as well as providing Speed Pulse, Reverse Gear and Amp Remote outputs.

PLEASE NOTE: To retain the factory camera, please use this interface with part number 27-245

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable designed for select Hyundai ix35 (2010-2015) vehicles with amplified audio systems (ISO connections behind the radio)

Allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. 

This interface also retains the OEM amplifier and fader menu, as well as providing Speed Pulse, Reverse Gear and Amp Remote outputs.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable designed for select Hyundai vehicles with SPDIF digitally amplified audio systems (24 and 18 PIN connections)

Allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. 

This interface also retains the OEM amplified SPDIF audio system, as well as providing Speed Pulse, Reverse Gear and Amp Remote outputs.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and screen retention harness allowing use of the original steering wheel audio controls when installing a new aftermarket head-unit.

It also acts as a full pass through cable to keep the original screen working (including reverse camera) on select Toyota Prado 150 models with factory navigation screen and JBL amplifier system.

PLEASE NOTE: Please use with our amplifier bypass cable, part number 20-322 for speaker ISO connection

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo. It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. 

This interface will also retain vehicle settings and parking sensor information, as well as providing a rear camera input.  

Suitable for Jeep Renegade (2015-2021) car models with original amplified Uconnect systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit.

This interface also includes the ability to control the IMID display using the steering wheel controls when the radio is turned off.

Suitable for European models of the Honda Civic (FK) (2012-2017) and Honda CR-V (2012-2017) with original dealer fitted (Type B) navigation.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. if unsure please use our universal patch lead set

CANbus steering wheel control interface for Mercedes C (W203), CLK( W208) (W209), E (W210) -Class vehicles with original Mercedes COMMAND2 head units.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for:

Saab 9-3 (1998 - 2003) all models.

Saab 9-5 (1997-2002) pre-facelift cars with manual or automatic gearboxes.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Saab 9-5 cars (2002-2006) cars after the first facelift.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Saab 9-5 cars (2006-2010) with original fit Denso navigation head units. Work on cars with gearbox paddle shift on the steering wheel.

PLEASE NOTE: This interface must be used with amplifier adapter harness 20-280

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Saab 9-5 cars (2006-2010) with original fit Denso navigation head units. Work on cars with manual or automatic gearboxes without paddle shift on the steering wheel.

PLEASE NOTE: This interface must be used with amplifier adapter harness 20-280

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable for Citroen Xsara (pre-facelift) 1996-2000

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable Fiat Fiorino 2019 onwards with original 7" navigation screen.

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.  

Suitable for Toyota models built after 2019

Audio cable for Ford cars made after 2003 with a quadlock radio connection, allowing use of the original buttons when fitting a Chinese aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Ford Mondeo Mk4 (Facelift) 2010-2014 cars to fit an aftermarket radio upgrade.

Includes turn on for the active FM antenna and a built in CANBUS interface for plug and play installation.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Ford Fiesta, and Kuga vehicles (with OEM Sony radio) to fit an aftermarket radio upgrade.

Includes turn on for the active FM antenna

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Allows access to installer settings menu via the vehicles steering wheel controls

Provides an amplifier turn on to allow retention of the Rockford Fosgate OEM amplified system

Suitable for Mitsubishi  Outlander (07-13) ,Outlander Sport (10-21)  Lancer (07-10) car models with Rockford Fosgate OEM amplified sound systems

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Mercedes vehicles from 2008 - 2013 with original Mercedes Comand APS NTG2.5 head units.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.  

Suitable for Toyota Alphard and Vellfire AH20 (2008 - 2015) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls and also provide connection from the vehicle connector to the new aftermarket radio.

Suitable for Holden Commodore VT, VX and VU (1997-2002) and Holden Monaro V2 (2001-2002) vehicle models with Maestro Series premium sound systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls and also provide connection from the vehicle connector to the new aftermarket radio.

Suitable for Holden Commodore VT, VX and VU (1997-2002) and Holden Monaro V2 (2001-2002) vehicle models

Not suitable for cars with Maestro Series premium sound systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls and also provide connection from the vehicle connector to the new aftermarket radio.

Suitable for Holden Barina Hatchback (05-08) and Chevrolet Aveo (05-08) vehicle models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

The interface also provides a breakout cable to retain the original top screen for the climate controls

Suitable for Honda Accord (Euro) 2003 - 2009 and Acura TSX 2004 - 2008

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel interface and audio connection wires allowing use of original buttons with a new after-market radio head-unit.

Suitable for Rover 200, 400, 600 and 800 models and version of the 25 and 45 built between 1999 and 2000.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.  

Suitable for Hyundai and Kia (2016 onwards) car models (WITH NEW STYLE WHITE CONNECTOR)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Adapter cable to fit an aftermarket stereo upgrade in a Land Rover Range Rover L322 car with original high line head unit and Harman Kardon Logic 7 or DSP amplifier and retain the use of the steering wheel controls.

Recommended to be bought as part of kit FK-983/3

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel interface and audio connection wires allowing use of original buttons with a new after-market radio head-unit.

Suitable for the following Citroen Xantia 1998 - 1999 with 3 wires for the steering wheel controls in the 10 pin ISO connector.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel interface and audio connection wires allowing use of original buttons with a new after-market radio head-unit.

Suitable for the following Citroen Xantia 1993 - 1998 with 5 wires for the steering wheel controls in the 10 pin ISO connector.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Mercedes C (W203), CLK( W208) (W209), E (W210) -Class vehicles with original Mercedes COMAND 2.0 head units.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as ignition.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

The interface also provides a breakout cable to retain the top screen

Suitable for Nissan Elgrand E51 (Series 3) with CARWINGS.

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

This interface is designed for the Fiat Ducato (2020 Onwards) originally fitted with a Daiichi Standard or Navigation radio (with single USB port below screen) and 8 button steering wheel.

Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage or Hyundai iX35 WITH ISO CONNECTIONS ON THE ORIGINAL RADIO as well as interfacing with the steering wheel controls.

This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.

Suitable for Kia Sportage (SL) or Hyundai iX35 2010 - 2015 with original OEM amplifier and ISO connections, including models with Infinity Sound Amplifier.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Subaru vehicle models (2007-2013) with original Kenwood Navigation head unit.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable for Proton Gen2 (2004-2012) Persona (2007-2015) and Satria Neo (2006-2015)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. 

Suitable for Lexus RX350 and RX400H 2003 - 2009 with Mark Levinson Sound

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

Replacement steering control loom for Renault vehicles.

Allows connection directly from the stalk paddle to a steering control interface, this bypasses original equipment such as display units, tuner modules and amplifiers that carry the stalk signal which is lost when removing the original head unit.

PLEASE NOTE: To be used with 29-608 steering control interface when fitting Double DIN aftermarket units.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit.

Suitable for Kia Picanto (2011-2017) Sportage (2016-2022) and Hyundai i20 (2014-2018) car models with factory fitted Satellite Navigation.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

Suitable for Renault Trafic, Nissan Primastar (2006 - 2014) and Vauxhall Vivaro (2011 - 2014)

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Suitable for Fiat Ducato 2021 onwards with ISO connections 

This interface also includes extensions for speed pulse and reverse gear outputs from the fuse box.

Steering Wheel Interface for fitting the Pioneer EVO kit to a Renault Clio 2012-2016 with a OEM R-Link navigation head unit.

This interface comes with a Pioneer patch lead included.

Only for use with the Renault Clio Pioneer EVO kit.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units.
Gives CANbus Ignition outputs and retains steering wheel controls.
The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for various Mercedes cars.
Gives CANbus Ignition outputs and retains steering wheel controls.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

Suitable for Isuzu D Max and MU-X (2020 onwards) and Mazda BT-50 (2020 onwards)

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK) This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector. Comes supplied with 21-139 double fakra antenna adapter.

PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-T6-DMX02, FK-699-T6-ILX) TO ACHIEVE THIS

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Citroen and Peugeot cars with Quadlock connectors behind the radio.
This interface will also allow the steering wheel controls to access the display screen menu.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for Fiat Chrysler Automobiles vehicles with the post 2014 large radio connector.

This interface also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals. Will also retain PHONE functions on some compatible radio's.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Steering wheel control interface and radio adapter cable for various BMW and Mini cars. It is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake output signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Outlander (2014-2018) and Pajero (2016-2018) car models

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Iveco Daily 2014 onwards with Delphi DAB original head unit and Fiat Ducato 2021 onwards with ISO connections and CAN steering wheel controls.

This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made.

PLEASE NOTE:THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers.

Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage as well as interfacing with the steering wheel controls.

This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.

MUST BE USED WITH PART 23-235

Suitable for Kia Sportage (SL) 2010 - 2015 with original OEM amplifier, including models with Infinity Sound Amplifier.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for select Vauxhall, Chevrolet and Holden vehicle models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.

Will also retain OEM amplifier and factory phone buttons (if equipped)

Suitable for Mitsubishi Montero Sport, Pajero Sport and Shogun Sport (2016-2019) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for Toyota RAV4 (2019 Onwards) with amplified sound systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse gear.

Suitable for various Toyota models from 2014-2019

Interface to connect to the CAN ignition of EU models of the Honda Civic and CRV (2012-2017) and provide ignition output as well as interfacing with the steering wheel controls and amplifier.

This interface also includes subwoofer retention and a reverse signal, speed pulse and parking brake outputs.

Suitable for European models of the Honda Civic (FK) (2012-2017) and Honda CR-V (2012-2017) with original OEM navigation.

NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit.

Suitable for MG MG3 (2013-2018) pre-facelift car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input

Suitable for Vauxhall Astra K and Holden Astra BK (2015-2021) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car along with sub output and amp turn on.

Suitable for Honda CR-V (2007-2011) car models fitted with 2VNO NAV units and an original subwoofer

PLEASE NOTE: Only suitable for Honda CR-V models with original NAV type 2VNO and original Subwoofer

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for Seat Ibiza, Leon and Arona car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for Vauxhall Viva and Opel Karl vehicle models.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel control interface for select Nissan vehicles (2013 Onwards)

This interface maintains the use of audio steering wheel controls, adapts from original vehicle to after market radio and provides CANbus outputs.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also retain vehicle settings and parking sensor information, as well as providing a rear camera input.  

Suitable Jeep Renegade (2015-2021) car models with original Uconnect systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering Wheel Control/ Infoadapter interface for select Alfa Romeo vehicle models with UConnect.

This interface allows the use of the Steering Wheel audio controls, clock adjustment and vehicle settings when installing an aftermarket head unit.

Fits Alfa Romeo Giulietta and Mito models with a 5" UConnect original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also allow vehicle information such as clock adjustment and vehicle settings to be displayed on the new aftermarket head unit.

Suitable for Fiat 500, 500L and Ducato (2014-2021) vehicle models

PLEASE NOTE: This interface will not allow retention of the original windscreen camera

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Quadlock CANbus steering wheel control interface for Vauxhall cars.
Maintain the use of audio steering wheel controls, adapts from original vehicle to after market radio and provides CANbus outputs.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface allows the use of the Steering Wheel audio controls, Optical Parking Sensor Display And Climate Control Visualization when installing an aftermarket head unit.

Suitable for select Volkswagen vehicle models with the white MFD display. Also compatible with Fender OEM Amplified Systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This CANbus interface connects to the original 24+54 pin connectors in the original system to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also retains the original phone buttons, as well as the USB, AUX and reversing camera (if the vehicle is equipped)

Suitable for Ford Ranger (2015-2020) cars with original SYNC 3 audio systems with small display. Also fits Ford Ranger US models (2019-2020)

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Car Audio Steering wheel interface allowing use of the original audio buttons with a new after market head-unit. 

Suitable for Nissan NV400, Vauxhall Movano and Renault Megane, Twingo, Master and Clio (2012 Onwards) with two white connectors behind the radio and a separate display.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel audio control for select Renault vehicles (2008-2012) with quadlock connections behind the original radio

This interface will retain the use of the steering wheel control buttons when fitting an after market head unit, as well as providing CANbus outputs, ignition, illumination, speed pulse, handbrake and reverse gear.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering wheel audio control and CANbus interface for select Renault vehicles with either "Update List" radios and a seperate display above the original radio.

This interface will retain the use of the steering wheel control buttons when fitting an after market head unit, as well as providing CANbus outputs, ignition, illumination, speed pulse, handbrake and reverse gear.(depends on vehicle)

The CANbus steering control signal runs through the display or original navigation unit, if the display or navigation unit is removed this interface will not function.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows you to retain the steering wheel controls and OEM phone buttons (if equipped) when replacing the OEM radio with a new aftermarket head unit.

Suitable for various Nissan vehicle models

Please see long description for full vehicle compatibility 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Hyundai steering wheel control interface for Hyundai vehicles without CAN-Bus.

This Steering control interface allows you to retain the use of the audio steering control buttons when upgrading to an aftermarket head unit. 

Suitable for digitally amplified Hyundai Santa-Fe (2015-2018) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering control interface to retain the use of the audio steering control buttons in select Nissan (2014-2017) vehicles.

PLEASE NOTE: This interface is only compatible with Qashqai Acenta model variants. This interface has a 20 pin connector and a 24 pin connector.

These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24/32 or 40 pin connector, before purchasing a solution.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel control interface allowing the use of the original buttons on your steering wheel when installing a new aftermarket head-unit.

Suitable for select Fiat vehicles with OEM fitted Type 250VP1/VP2 radios and the newer larger style connector behind the radio.

PLEASE NOTE: A technical knowledge of car audio fitting is necessary for the installation of this product

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface will retain Steering controls and also provide optional input for reversing camera/ parking sensors (if applicable) and outputs for park brake, speed pulse, reverse gear and mute

Suitable for select Volkswagen vehicle models with original MIB II radio systems.

PLEASE NOTE: This interface will only retain basic features such as steering wheel controls on Single DIN radios

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

This interface allows the use of the Steering Wheel audio controls, Optical Parking Sensor Display And Climate Control Visualization when installing an aftermarket head unit.

Suitable for select Volkswagen vehicle models with original MIB/ PQ radio systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

CAN-Bus  Steering Wheel Control Interface for Fiat, Citroen, Peugeot and Vauxhall vehicles with VDO original stereo and Mini ISO connector. 

Suitable for various Fiat, Peugeot and Vauxhall vehicles with ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs.

PLEASE NOTE: Not suitable for UConnect Systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface for Range Rover Sport cars 2005-2009 that will also allow the original head unit to remain connected and relocated so the original display (navigation) above the radio will continue to work.
This interface will retain the use of the steering wheel audio controls.

PLEASE NOTE: This interface is designed for Range Rover Sport (L320) 2005-2009 car models with basic audio and separate screen above the original radio.

This plug and play cable allows you to connect an aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Hyundai cars made from 2008 onwards.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Audio cable for Honda Civic and CRV made after 2006, allowing use of the original buttons when fitting a Chinese aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Honda CRV 2007> Car Audio Steering wheel ISO cables allowing use of the original buttons when fitting an aftermarket car radio stereo upgrade. Provides power and speaker connections from the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Suzuki cars made from 2000 onwards.

PLEASE NOTE: Only suitable for Honda CR-V models with original NAV type 2VNO

This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

This plug and play cable allows you to connect an aftermarket head-units with resistive programmable steering controls to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Mazda cars made from 2001 onwards.

PLEASE NOTE: This cable is designed for Chinese made head-units with resistive programming steering controls (KEY1, KEY2 or SWC1, SWC2) 

This plug and play cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket Chinese made head-units with resistive programming steering controls ( KEY1, KEY2 or SWC1, SWC2) 

Fits most Suzuki cars made from 2000 onwards.

PLEASE NOTE: This cable is designed for Chinese made head-units with resistive programming steering controls (KEY1, KEY2 or SWC1, SWC2) 

This plug and play cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fits most Honda cars made from 1998 onwards.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

This cable is mostly used in cars pre 2005. Check that the car has the twin 10 and 6 pin connectors.

PLEASE NOTE: This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Nissan Navara D40, NV200, Pathfinder, Patrol and Qashqai cars with 6 function audio controls on the steering wheel and 20 pin connectors at the back of the radio. (Does not include the i button)

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, phone and source buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface allows use of cars original steering wheel buttons with a new audio system or navigation unit.

Suitable for BMW car models with K Bus data and Quadlock connector.

Also fits Range Rover III with BMW audio systems and Mini One and Cooper cars with the boost CD original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface for Toyota RAV4 cars allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the use of the original OEM camera.

Suitable for Toyota Alphard (2002 - 2008) and RAV4 (2006 - 2012) vehicle models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Citroen C1, Peugeot 108 and Toyota Aygo (2014 Onwards) car models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

DAF CF, XF (2017 Onwards) ISO steering wheel control adapter interface. Retains the use of the audio steering wheel controls with an aftermarket head unit.

PLEASE NOTE: After installation, radio information on the cockpit display (eg. radio station names, RDS information) will be lost. If a Bluetooth module is fitted in the vehicle, the phone buttons will still function correctly.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Mazda 5 Premacy car models with original Tom Tom navigation head-units.

PLEASE NOTE: These cars DO NOT have phone audio controls on the steering wheel

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will also retain the OEM camera on select Visia models and also original factory features such as date, time and temperature.

Suitable for Nissan Navara and Frontier models (2015-2019)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows you to retain the steering wheel controls and OEM phone buttons (if equipped) when replacing the OEM radio with a new aftermarket head unit.

Suitable for Nissan Micra (2017-2020) car models.

PLEASE NOTE: Please remove the radio and check if you have a 20 or 24 pin connector before purchasing a solution

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Honda CRV (2007-2011) car models with original NAV type 2VNO radio

PLEASE NOTE: Only suitable for Honda CR-V models with original NAV type 2VNO radios

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Discovery 3 and Range Rover Sport with Harmon Kardon (WITHOUT TOP DISPLAY)
Car Audio Steering wheel interface and iso connectors allowing use of original buttons with a new aftermarket head-unit.

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

CANbus steering wheel control interface for Alfa Romeo 159 Brera vehicles with factory fitted Magneti Marelli sat nav systems.

This interface uses a quadlock connection behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals. Will also retain PHONE functions on some compatible radio's.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Audio Steering control interface for amplified Lexus and Toyota cars with TOYOTA/PIONEER original amplifiers.

The cable RCA Phono connectors to aftermarket head-unit

Cars with amplified systems require a JBL or other data signal to turn on the amplifier, you will need 23-224 with this interface.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and radio adapter cable for Landrover Discovery 2 cars with original harman/kardon amplified audio systems and original Alpine brand radios.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Volvo S60, V60 and V70 cars with original HU-6XX and HU-8XX radios.

The CANbus interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and phone buttons from the steering wheel with the new radio.

It also provides ignition, illumination, reverse gear, speed pulse and handbrake output signals to the new stereo.

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Iveco Daily (2014 onwards) vans with factory fitted basic radio systems.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel audio control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals.

PLEASE NOTE: This interface is only suitable for Iveco Daily (2014 onwards) vans with factory fitted basic radio systems.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Steering wheel control interface and radio replacement adapter cable for various Mercedes cars.

The CANbus interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and phone buttons from the steering wheel with the new radio.

The CANbus interface will also provide ignition, illumination, handbrake, reverse gear and speed pulse output signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Ford Transit, Transit Custom and Transit Connect vans without a separate  display above the radio.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: FOR TRANSIT RADIOS WITHOUT THE DISPLAY ON TOP OF THE DASH

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

The CANbus interface will also provide ignition, illumination, reverse gear, handbrake and speed pulse outputs to the new stereo.

Suitable for Iveco Daily (2016 Onwards) vehicle models with original navigation systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as of the volume, skip track and source buttons from the steering wheel.

Suitable for Ford Mustang 5th generation (2011 onwards) facelift car models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls such as use of the volume, track skip, source and phone buttons with an aftermarket head unit.

Suitable for Mercedes Citan vehicle models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls such as use of the volume, track skip, source and phone buttons with an aftermarket head unit.

Suitable for Mercedes Citan vehicle models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Adapter cable to fit an aftermarket stereo upgrade in a Land Rover Range Rover L322 car with original high line head unit and DSP amplifier and retain the use of the steering wheel controls.

Plug and play installation when used with the amplifier bypass cable.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Adapter cable to fit an aftermarket stereo upgrade in a BMW X5 E53 car with original sat nav and DSP amplifier and retain the use of the steering wheel controls.

Plug and play installation when used with the amplifier bypass cable.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of the original steering wheel buttons with a new aftermarket head-unit.

Also includes PHONE commands for compatible Bluetooth head-units, speed pulse. reverse switch and handbrake outputs.

Suitable for a Kia C'eed (2012-2017) and Kia Sportage (2010-2015) with an original navigation head unit and no amplifier.

PLEASE NOTE: This interface is not suitable for cars with an original amplifier

NOT FOR CARS WITH MARK LEVINSON AMPLIFIERS

Steering control interface suitable for Lexus SC430 with Toyota amplifier

Also works on Toyota Prius (2001-2003) model

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

CANbus steering wheel control interface for Mercedes Actros and Atego lorries.

This CANbus interface will allow you to retain the audio steering wheel controls (including phone button) when installing an after market head unit.

Suitable for Actros MP2 (2002-2008), MP4 (2011 Onwards) and Atego (2013 Onwards) lorry models  +12V

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Volvo FH-Line (2008 Onwards) truck models with original ISO connections behind the radio.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, handbrake and illumination signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as telephone buttons/ phone commands.

Suitable for newer Mazda 3,5,6 car models with Phone Commands.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface includes CANbus ignition and positive reverse output for a camera feed, park brake signal (automatic cars only)

Suitable for Skoda Yeti (2014-2017) car models with the new 52 way Quadlock connector

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

CANbus interface allowing the use of the steering wheel controls when installing a new aftermarket head unit.

This interface also retains the original aux and USB ports on Ford Ranger vehicle (Does not retain aux and USB for Transit Custom vans)

Suitable for Ford Transit Custom Euro 6 (2015-2021) and Ford Ranger (2015-2020) vehicle models. 

CANbus steering wheel control interface for Scania R-Series (2004 Onwards) vehicle models with original ISO connections behind the radio. This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo. Phone functions included for Alpine, Pioneer.

PLEASE NOTE: This interface provides Volume, Seek up and down, Source and Mute BUT NOT telephone commands

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering control interface to retain the use of the audio steering control buttons in select Nissan (2014-2017) vehicles.

PLEASE NOTE: This interface is only compatible with select Nissan with Visia spec model variants without OEM factory fitted navigation.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Suitable for BMW 3-Series (E46) vehicles with original navigation screens that have the tuner unit in the rear of the car with the round pin connector.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Car Audio Steering wheel interface allowing use of original audio buttons with a new aftermarket head-unit. The interface also provides an ignition supply to the new head unit.
For DAF XF 2012 onward lorries.
Includes ignition, speed pulse, reverse, handbrake and illumination signals.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Will also retain Phone Commands on select head units.

Suitable for SsangYong Musso (2016 Onwards) and SsangYong Tivoli (2015 Onwards) car models.

Adapter lead to pair an InCarTec 49- series steering wheel control interface to an aftermarket Chinese, Xtrons, Eonon or unbranded stereo.

PLEASE NOTE: This patch lead must be purchased with a InCarTec 49-series steering wheel control interface, it will not work on its own.

For programmable 3.5mm aftermarket head units please use this with 20-3.5-SWC

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Steering wheel control interface and adapter cable for Vauxhall Corsa D cars. Adapter cable to fit a new radio to the original connectors in the car with a built in interface to retain the use of the original radio steering wheel controls when fitting an aftermarket stereo upgrade.
The interface also provides a key present ignition supply, reverse gear, handbrake and speed pulse outputs.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Complete radio replacement interface for Renault cars (2012 Onwards) with white connectors and original navigation units.
This interface will retain the use of the steering wheel controls and the navigation unit when replacing the original audio head unit for an after market unit.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Chrysler Voyager and Dodge Ram vehicle models with original amplifiers.

PLEASE NOTE: For vehicles with original amplifiers please use 23-211 in addition to this interface

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Fiat/ Alfa Romeo (2014 Onwards) vehicles with the larger-style connector behind the radio.

This interface uses a larger style connection behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface for Freelander 2 cars with the original Alpine premium sound system that will also retain the original parking sensor tones and the use of the display/navigation screen (no audio).

This interface will retain the use of the steering wheel audio controls.

INCLUDES PHONE COMMAND

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface retains the use of both the steering wheel control, including telephone buttons, and the Harman/Kardon original amplifier.

Suitable for Mini One and Cooper cars with the original boost CD radio and Harman/Kardon original amplifiers.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Interface to retain the use of the steering wheel controls in various Volkswagen vehicles including Amarok, Beetle, Caddy and Transporter T6 (WITH NEW STYLE QUADLOCK) This is a new style Quadlock connector used on select VW vehicles. This can be identified by the 2 larger pins In the corner of the connector

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the standard steering wheel audio controls (volume, seek, source and mute) with an aftermarket head unit.

Will also retain the use of volume, seek, source, mute, phone answer, reject and voice command buttons.

Suitable for Suzuki Vitara, Swift, SX4 and Kizashi car models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

CAN-Bus Steering Wheel Control Interface with built-in speaker for Chevrolet vehicles. Retains vehicle settings menu, vehicle chimes and OEM phone buttons (if equipped)

Suitable for Chevrolet Aveo, Cruze and Equinox car models. Also fits select Holden vehicle models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface for Range Rover Sport cars 2005-2009 that will also allow the original head unit to remain connected and relocated so the original display (navigation) above the radio will continue to work.
This interface will retain the use of the steering wheel audio controls.
INCLUDES PHONE COMMAND

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Car Audio Steering wheel interface allowing use of original buttons (including telephone button) with a new aftermarket head-unit. Use with Porsche cars with CAN bus and Quadlock connectors behind the radio.
Includes Ignition, speed pulse, reverse gear, handbrake and illumination signals.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls and also provide connection from the vehicle connector to the new aftermarket radio.
Includes Phone commands.

Suitable for Ssangyong Korando Sport car models

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

A class (W176) C class (W204,) CLA Class (13-19), CLAS (W218) E class (W212),G Class((W462) GLA (X156) ML (W166) S Class W221) Vito Viano (W447)
Provides CAN ignition, reverse, illumination, speedpulse, parking, steering wheel audio commands.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Steering wheel control interface for 2014> model Vauxhall Vivaro, Renault Trafic, Nissan NV300 and 2016> Fiat Talento vans with original fit navigation head units.
Also fits Movano and Renault Master.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Complete radio replacement interface for Renault cars with QUADLOCK connectors and original navigation units.
This interface will retain the use of the steering wheel controls and the navigation unit when replacing the original audio head unit for an after market unit.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Complete radio replacement interface for Renault Clio cars with ISO connectors and original TOMTOM navigation units.
This interface will retain the use of the steering wheel controls and the Tom TOM navigation unit when replacing the original audio head unit for an after market unit.

PLEASE NOTE: This interface is not suitable for Renault Trafic and Master vans

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. 

Suitable for Jaguar XK8 (2000 - 2005) car models with premium audio systems.

PLEASE NOTE: This interface provides steering controls and power only, an additional amplifier bypass cable is required for audio.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Mercedes C (W203), CLK( W208) (W209), E (W210) -Class vehicles with original Mercedes COMMAND2 head units.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface allows access to installer settings menu via the vehicles steering wheel controls

Also provides an amplifier turn on to allow retention of the Rockford Fosgate OEM amplified system

Suitable for Mitsubishi Shogun, Pajero and Montero (2010-2013) car models with Rockford Fosgate OEM amplified sound systems

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Mitsubishi Shogun, Outlander, Citroen C-Crosser and Peugeot 4007 vehicles with original factory fitted navigation head units.

PLEASE NOTE: Two loose wires need connecting to the 32 way grey connector in the car

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) and Fiat Talento (2015 Onwards) vehicles with standard original radios.

Also fits Movano and Renault Master vans and Master Truck Red Edition 2020.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.

It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.

PLEASE NOTE: FOR AUDI VEHICLES WITH FULLY AMPLIFIED SOUND SYSTEMS PLEASE USE 49-AUD-01-BOSE

Steering wheel control interface and adapter cable for Audi cars with ISO and mini ISO connectors behind the factory radio. This adapter cable allows the fitting of a new aftermarket radio by adapting the original connectors in the car to ISO and has a built in CANbus interface to retain the use of the original radio steering wheel controls. This interface also has a built in high to low level adapter for which allows the new stereo to work with the original amplifier to drive the rear speakers in the car and the subwoofer.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

CANbus steering wheel control interface for Audi cars. The interface has a universal hardwire loom, this is suitable for integrating with other Audi ISO adapter cables.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Car audio and steering wheel control interface for Audi cars that have quadlock connectors behind the radio and have fully amplified BOSE audio systems.

The CANbus interface will generate an ignition power supply to the new radio, via the red wire. it will also give out an illumination signal, (orange) speed pulse signal (pink), reverse gear positive output (Purple), Handbrake negative (Green) and Mute out (Yellow/Black)

The interface also switches on the original digital amplifier on RNS-E systems.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and amplifier retention interface for Honda Civic and CR-V cars 2012 onwards with original Bluetooth, amplifier and sub woofer.
PLEASE NOTE: Not suitable for cars with original navigation

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface will allow use of the audio controls and the telephone buttons (if equipped) from the steering wheel.

Suitable for Honda Civic, CR-V and Civic-Tourer car models.
PLEASE NOTE: Suitable for Non-Amplified cars without original navigation

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit on various General Motors cars and trucks.

This interface also allows vehicle settings and clock adjustment to be displayed on any aftermarket head unit with rear camera input.

Suitable for select Vauxhall, Opel, Chevrolet, Holden and Buick vehicle models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Also provides power and speaker connections from the car.

Suitable for Vauxhall/ Opel Monaro (2004-2006) and select Holden car models

PLEASE NOTE: No data is provided for the display

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for BMW 3-Series (E46) car models with original Harman Kardon amplifier and a 17 Round Pin connector.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Freelander 2 car models fitted with an original Alpine amplifier.
PLEASE NOTE: This interface will only retain the steering wheel controls

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

CAN-Bus Steering Wheel Control Interface for Ford (2012 Onwards) vehicle models. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel.

Also maintains date, time & temperature display, OEM parking sensor audio with new  parking buzzer. Includes CAN ignition and speed pulse for Navigation systems

PLEASE NOTE: Not suitable for cars with "M" BUTTON

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. It also has a built in CANbus interface to generate an ignition power supply, also gives a speed pulse output.

Suitable for Alfa Romeo 147 and GT (2007 Onwards) car models with CANbus ignition.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

Steering wheel control interface for MAN T-Series (TGA/ TGL/ TGM/ TGS/ TGX) trucks with original factory fitted radios.

This interface uses a quadlock connection behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides Ignition, speed pulse and illumination signals. The interface also includes a 24V -12V converter.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new after market head-unit.

This interface also provides power/speaker connections from the car and includes a DIN to ISO conversion for the amplifier with 4 adjustable line in channels.

Suitable for Jaguar XJ8 & XK8 (1996-1999) car models with original Alpine Premium Sound audio system, these cars will have a white 20 pin white connector and a 6 pin round din connector at the back of the radio.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.

This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

For VW group cars   with K bus steering controls. 
Golf IV(2000-2003), Passat B5 GP(2000-2005) Seat Alhambra/ VW Sharan (2000-2010) VW Bora & Jetta (2000-2003)
Audi A3 (2000-2003)
Includes Ignition and steering controls only. 
The cable harness includes ISO connectors and Phono cables 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Subaru Legacy and Outback (2012 Onwards) car models with Toyota style OEM radio plugs.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Steering wheel control interface and adapter cable for various Toyota and Lexus cars made after 2012

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The cable also provides a speed pulse signal to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new after market head-unit. 
Includes audio controls, phone answer and ignition supply as well as speed pulse, parking and reverse signal if needed for aftermarket Navigation systems
This interface will also retain date, time, temperature and trip display settings.
Suitable for Vauxhall Vivaro (2011-2014) vehicle models

PLEASE NOTE: THE ORIGINAL DISPLAY MUST REMAIN IN PLACE FOR THIS TO WORK

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for select Renault and Dacia car models made after 2011

Also fits Mercedes Citan, Nissan NV400 and Vauxhall Master (2012 Onwards) vehicle models.

PLEASE NOTE: Suitable for models that have the basic radio that has the display on the radio itself

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Great Wall Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Provides power and speaker connections from the car.

Also includes Phone commands on compatible Bluetooth head units.

Suitable for Ssangyong Korando (2010-2019) car models.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Steering wheel control interface and radio adapter cable for various BMW and Mini cars. It is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The CANbus interface will also provide ignition, illumination, speed pulse, reverse gear and handbrake output signals to the new stereo.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.

Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse and reverse gear CAN outputs.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Landrover Range Rover (99-02) with standard audio system.

Car Audio Steering wheel interface and ISO cables  allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Landrover Range Rover VOGUE (99-02) with DSP and  HARMAN KARDON audio system.

Car Audio Steering wheel interface and ISO cables and PHONO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and LOW level PHONO speaker connections from the car.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

Suitable for Isuzu D Max and MU-X (2012 - 2020 ) and Holden Colorado and Colorado (2012 - 2016)

PLEASE NOTE: This interface includes PHONE commands for compatible Bluetooth head-units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface has power and speaker ISO connection allowing will the use of the steering wheel audio controls with an aftermarket head unit. 

Suitable for Subaru Impreza (2007-2011) and Forester (2008-2011) car models with the newer 20 way car audio connector

PLEASE NOTE: Not suitable for OEM Kenwood factory fitted navigation units

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Jaguar XK8 & XJ8 (2000 - 2005) car models with standard audio systems

PLEASE NOTE: Two loose wires need connecting to the large 26 way connector

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Volvo S60, V60, V70 and XC70 cars with original Green/ Grey connections behind the radio

The CANbus interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and phone buttons from the steering wheel with the new radio.

It also provides ignition, illumination, reverse gear, speed pulse and handbrake output signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

This interface includes display reset, parking buzzer & CAN services, as well as climate control, parking sensor audio and warning tones.

Suitable for Vauxhall/ Opel Insignia (2008-2013) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Also allows the steering wheel buttons to access the original menu system on the cars display. This interface will also retain the vehicle chimes and OEM phone buttons (if equipped)

PLEASE NOTE: Not suitable for cars with original navigation screens

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, PLEASE NOTE: DOES NOT RETAIN ANY MULTIFUNCTION DISPLAY INFORMATION ON THE NEW RADIO

PLEASE USE ONE OF OUR DISPLAY RETENTION FITTING KITS (FK-699-VW-DMX02, FK-699-VW-ILX) TO ACHIEVE THIS

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Vauxhall and Opel car models that have ISO connectors at the back of the original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the original Toyota connectors to standard aftermarket ISO connectors.

Suitable for various Toyota car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls and also provide connection from the vehicle connector to the new aftermarket radio.
Includes Phone commands.

Suitable for various SsangYong models - see long description.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for various Subaru (2011 Onwards) car models with Phone Buttons on the steering wheel

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Subaru Legacy (2009 - 2014) and Subaru Outback (2009 - 2015) car models.

PLEASE NOTE: Interface includes Phone answer and reject functions

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Subaru Forester (2005-2008) car models

PLEASE NOTE: A loose wire connection is required

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the 20 pin Suzuki connector to standard aftermarket ISO connectors.

Suitable for Suzuki Vitara MK2 and Grand Vitara MK2 car models.

PLEASE NOTE: An additional patch lead is required to suit the brand of radio being fitted. If unsure please see full description

Car Audio Steering wheel control interface allowing use of the original buttons with a new aftermarket head-unit.

Suitable for Saab 9-3/ 9-5 (2006 Onwards) cars with GM LAN bus connectors behind the radio.

This interface does not include Telephone answer and reject features.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Rover 25/ 45 & 75 with VDO original radio and green mini ISO behind radio.
Also fits various MG car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Renault Clio, Laguna, Safrane, Kangoo and Espace cars before 2000 with 10 way iso connector. These cars do not have a seaparate display. ( the radio has its own display) 
Car Audio Steering wheel interface and ISO cables allowing use of Stalk control with a new aftermaket head-unit. Provides power and speaker connections from the car.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Porsche Cayenne (2002-2007) car models with original ISO connections behind the radio.

This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo. Phone functions included for Alpine, Pioneer.

PLEASE NOTE: A dedicated 49-Series patch lead MUST be ordered with this product. Please see full description

CANbus steering wheel control interface for Citroen and Peugeot cars with Quadlock connectors behind the radio.
This interface will also allow the steering wheel controls to access the display screen menu.
The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.

Suitable for Peugeot 406 (1999-2002) car models with separate display. The connector is a 4 way brown Cinch below the steering cowling.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface provides power and speaker connections from the car. Connects via a10 way ISO behind the radio

Suitable for Peugeot 206 (98-99 only) 306 (93-99) car models (With 4 function stalk) 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermaket head-unit.

This interface provides power and speaker connections from the car. Connector is a Din plug behind the radio

Suitable for Peugeot 405 and 605 car models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of the vehicles original steering wheel buttons with a new aftermarket head-unit.

This interface also provides power and speaker connections from the car.

Suitable Renault based cars and vans without separate display with either "Tuner list" radio or "Update list" radio 's that have a small display on the radio itself. 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Renault (Pre 2005) car models with separate display and an original  "Tuner list" radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as retaining the trip computer control

Suitable for Mitsubishi Colt (2009 Onwards) car models

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes PHONE commands for compatible head-units.

Suitable for various Mitsubishi L200, Lancer, Mirage, Outlander and Shogun vehicle models.

PLEASE NOTE: Not suitable for cars with original factory SAT NAV

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Mitsubishi Colt (2009 Onwards) and L200 (2006-2015) car models

PLEASE NOTE: To maintain DSP (Trip Computer Control Display) use item 29-680-TRIP

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Mitsubishi Colt  (05-08). . 
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

To maintain DSP (trip computer control) use item 29-656-ALP (Alpine only)

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface designed for all Mercedes cars with CAN bus.

This interface uses requires hard wired connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.

This interface also works with Command systems

This interface is NOT compatible with the older SL-Class model variants

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Mazda cars made after 2000 and Ford Ranger vehicles from 1999-2011.

PLEASE NOTE: For cars with BOSE sound systems please use 20-273

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Landrover Range Rover P38 (95-99) with Clarion original radio and amplified HARMON KARDON audio system. The car has a pink 10 way connector for the speakers.
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and low level  speaker connections from the car.
Includes 4 channnel adjustable line-out converter.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Landrover Range Rover P38 (95-98) fitted with Clarion OEM radio.
Car Audio Steering wheel interface only.

This car has an amplified system using a 10 way ISO connector (Pink in car) with low level inputs from the radio to the amplifier. 
To drive this amplifier use code 20-274 along with our code 29-659 or use complete item 29-659-HK

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Special interface for Freelander 2 with standard audio system
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. CAN interface included with 12v ignition, and parking buzzer retention.

Includes parking buzzers to maintain PDC

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.

Suitable for Landrover Freelander (03-06) Discovery II (02-04) and Rover 45 car models fitted with Original Becker Traffic Pro SAT NAV.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.

Suitable for Landrover Discovery II, Freelander I (2001-2003) and Rover 75 car models (With BMW round pin wiring)

PLEASE NOTE: Single loose wire needs connecting under the steering column

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Landrover Freelander, Discovery 2, Rover 75/800 and MG car models

PLEASE NOTE: This interface is not for vehicles with original Becker Traffic Pro head units, a different interface is required

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Kia Cee'd and Pro_cee'd (2007-2009) car models.

PLEASE NOTE: For Kia Cee'd facelift models from 2010 Onwards please use 29-675

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Kia Sorrento (03-06) & Carens (03-06) car models

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Jaguar X type with standard audio system.
Also for Jaguar S type after 2003.
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.
Provides power and speaker connections from the car.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new after market head-unit.
This interface also provides power and speaker connections from the car.

Suitable for various Jaguar XJ/XK8/XKR (1996-1999) car models with standard audio systems, these cars will have a 20 pin white connector at the back of the radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Honda Accord, CR-V, CR-Z, Insight and Jazz cars.

The interface and radio adapter cable is plug and play except for one wire, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface allowing the retention of select steering wheel controls when installing an aftermarket head unit.

This interface also retains climate control features to the original screen and provides outputs for Speed Pulse and Amp remote turn on. 

Suitable for Honda Civic (2006-2011) car models.

PLEASE NOTE: This product is only compatible for hatchback vehicles without navigation only.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit in a Honda Civic (2006-2010), CR-V (2007 Onwards) and FR-V (2007-2009). Provides power and speaker connections from the car.

Works with CR-V cars with original standard head unit .

PLEASE NOTE: For Civic models with the air-con button on the original radio, this interface does not retain the use of the air con button and air con display, please use item 29-CTH02

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface retains the use of the steering wheel audio controls with an aftermarket head unit by adapting from the 20 pin Honda connector to aftermarket ISO connectors.

Suitable for Honda Jazz (2002-2008) car models. 

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit in a Honda Civic (2000-2015), CR-V (2001-2006) and Odyssey (1999-2004). Provides power and speaker connections from the car.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.

Suitable for Honda Civic and Accord models with three function steering wheel buttons. Volume up, volume down and Mode only!

PLEASE NOTE: If the car has 5 function steering wheel buttons please use alternative interface 29-663

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Honda S2000 cars with a 20 Pin connector behind the original radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also includes Display reset, parking buzzer & CAN services.
Includes CAN ignition and speedpulse for Navigation systems

PLEASE NOTE: Suitable for vehicles with "OK" button on steering wheel (NOT FOR CARS with "M" BUTTON)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also includes Display reset, parking buzzer & CAN services.

Includes CAN ignition and Speed Pulse for Navigation systems

Suitable for Ford Fiesta (2008-2010) with "OK" button and red display

PLEASE NOTE: Suitable for vehicles with "OK" button on steering wheel (NOT FOR CARS with "M" BUTTON)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Also includes CANbus ignition and illumination outputs.

Suitable for Ford Focus II, C-Max, Mondeo, Galaxy, S-Max, Transit (with original 6000CD head units and CANbus service)

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Ford Fiesta (02-06) Fusion. 
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Ford Galaxy (2001 - 2006) and Mondeo Mk2 (1996-1999) car models.

PLEASE NOTE: The single wire needs to be connected to the Ford 6 way connector

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes Phone commands for compatible Bluetooth head units.

Suitable for various Hyundai and Kia car models

PLEASE NOTE: This interface is not suitable for cars with an original amplifier

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit as well as the vehicles phone functions.

Suitable for various Hyundai/Kia (2009 Onwards) car models fitted with Mini ISO and iso connectors.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes ISO power and phono low level speaker wiring to connect the car to the aftermarket head-unit

Hyundai Santa Fe and Kia Sorento (2006-2009) car models with factory fitted amplifiers

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Sonata (06>) Sante Fe (06-09)
Kia Sedona, Sorrento (06-09) Carens (06>)
Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.
Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO connectors allowing use of original buttons with a new aftermarket head-unit.

Suitable Ford Focus(98-04) Mondeo,(00-03,) Galaxy (Pre 2004) and Transit Connect (Pre 2004) vehicle models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Ford C-Max, Fiesta, Focus, Fusion, Galaxy, Kuga, Mondeo, S-Max and Transit vehicles to fit an aftermarket radio upgrade.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the 20 way mini ISO connector behind the radio to standard aftermarket ISO connectors.

Suitable for Fiat Ducato, Fiat Multipla, Fiat Panda, Citroen Relay and Peugeot Boxer vehicle models.

This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

CANbus steering wheel control interface for Alfa Romeo and Fiat vehicles with older style ISO connections.

This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus outputs. Stops original display flashing once the correct settings have been made.

PLEASE NOTE:THIS IS NOT A DIY PRODUCT! It should only be fitted be experienced 12V engineers.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Nissan Micra models K12 & C+C fitted with Single DIN Blaupunkt OEM head-unit.

Also fits early 2006-2007 model Nissan Note (cars without Phone button)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel control interface and adapter cable for Nissan Almera, Terrano and X-Trail cars with 16 and 8 pin connectors at the back of the radio.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Citroen C Crosser and Peugeot 4007 (2007-2012) car models.

PLEASE NOTE: Not suitable for cars with original factory SAT NAV

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for Chevrolet Captiva, Epica, Aveo and Spark car models with the new GM style connectors.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the 20 pin mini ISO behind the radio to standard aftermarket ISO connectors.

Suitable for Chevrolet Kalos, Lacetti and Tacuma car models.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the standard steering wheel audio controls (volume, seek, source and mute) with an aftermarket head unit.

Suitable for Suzuki Vitara, Splash, Swift, SX4 and Kizashi car models. Also fits Fiat Sedici and Vauxhall Agila B models.

PLEASE NOTE: Cars with phone buttons will need to use part number 29-714

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the 20 pin mini ISO connector behind the radio to standard aftermarket ISO connectors.

Suitable for various Citroen, Fiat and Peugeot (2001-2002) vehicles. These cars made after 2001 had 3 control wires for the steering wheel audio controls.

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Steering wheel interface and audio connection wires allowing use of original buttons with a new after-market radio head-unit.

Suitable for the following Citroen/ Peugeot vehicle models:

Citroen Synergie (1995 - 2002) Xantia (1993 - 2001) Xsara Facelift (2000 - 2004)

Fiat Ulysse 1st Gen (1995 - 2003)

Lancia Zeta (1994 - 2002)

Peugeot 306 (1999 - 2002)

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for Chrysler and Jeep cars made before 2007 that do not have CANbus wires at the back of the original radio

PLEASE NOTE: Loose wire needs to be joined to a wire underneath the cars steering cowling

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Suitable for select BMW 3,5,7-Series and Mini models with a BMW round pin connection

PLEASE NOTE: If fitting to a Harman Kardon system and you are experiencing distorted audio at a low volume, please use this interface with a 20-273

PLEASE NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please see Full Description

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.

Suitable for  Audi A6 (00-04) & Seat Ibiza (02-08) car models with single wire K bus data.

NOTE: An additional patch lead is required for the steering controls depending on the make of radio being fitted.

Car Audio Steering wheel interface and ISO cable harness allowing you to retain the use of the standard steering wheel audio controls (volume, seek, source and mute) when installing an aftermarket head unit.

Suitable for Land Rover Discovery 3 and Range Rover Sport car models with standard factory radio and standard audio systems.

PLEASE NOTE: Only suitable for standard audio systems without top screen navigation, for vehicle with top screen please use 29-712